PARTNER SEARCH




Search Results

ID: PS-17-FR-1901
Date: 06.07.2017
Topic:
FETOPEN-1-2016/2017:
FET-Open Research and Innovation Actions
Institution: Genes Ink
Profile/Expertise: see attachment


ID: PS-17-FR-1900
Date: 05.07.2017
Topic:
PILOTS-01-2016:
Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties

FETOPEN-1-2016/2017:
FET-Open Research and Innovation Actions

NMBP-02-2016:
Advanced Materials for Power Electronics based on wide bandgap semiconductor devices technology
Institution: Genes Ink
Profile/Expertise: see attachment


ID: PO-17-FR-1899
Date: 04.07.2017
Topic:
PILOTS-01-2016:
Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties

FETOPEN-1-2016/2017:
FET-Open Research and Innovation Actions

NMBP-02-2016:
Advanced Materials for Power Electronics based on wide bandgap semiconductor devices technology
Institution: Genes Ink
Profile/Expertise: see attachment


ID: PO-17-IT-1897
Date: 22.05.2017
Topic:
M-ERA.NET 2 - 2017:
Innovative surfaces, coatings and interfaces

M-ERA.NET 3 - 2017:
High performance composites
Institution: Mediterranea University of Reggio Calabria- Department of Architecture and Territory
Profile/Expertise: see attachment


ID: PS-17-IT-1893
Date: 19.05.2017
Topic:
M-ERA.NET 2 - 2017:
Innovative surfaces, coatings and interfaces

M-ERA.NET 3 - 2017:
High performance composites
Institution: Mediterranea University of Reggio Calabria- Department of Architecture and Territory
Profile/Expertise: see attachment


ID: PO-17-DE-1892
Date: 15.05.2017
Topic:
EuroNanoMed3-2017 a.:
Regenerative medicine

EuroNanoMed3-2017 b.:
Diagnostics

M-ERA.NET 5 - 2016:
Interfaces between materials and biological hosts for health applications
Institution: Reutlingen University and Max Planck Institute for Medical Reaearch
Profile/Expertise: see attachment


ID: PO-17-DE-1891
Date: 15.05.2017
Topic:
EuroNanoMed3-2017 a.:
Regenerative medicine

EuroNanoMed3-2017 b.:
Diagnostics

M-ERA.NET 5 - 2016:
Interfaces between materials and biological hosts for health applications
Institution: Reutlingen University and Max Planck Institute for Medical Reaearch
Profile/Expertise: see attachment


ID: PS-17-DE-1890
Date: 12.05.2017
Topic:
M-ERA.NET 2 - 2017:
Innovative surfaces, coatings and interfaces
Institution: Fraunhofer IZI-BB
Profile/Expertise: see attachment


ID: PS-17-IT-1889
Date: 10.05.2017
Topic:
M-ERA.NET 2 - 2017:
Innovative surfaces, coatings and interfaces
Institution: Centro Sviluppo Materiali S.p.A.
Profile/Expertise: see attachment


ID: PS-17-ES-1888
Date: 05.05.2017
Topic:
EuroNanoMed3-2017 a.:
Regenerative medicine

EuroNanoMed3-2017 c.:
Targeted delivery systems
Institution: VALL HEBRON RESEARCH INSTITUTE
Profile/Expertise: see attachment


ID: PO-17-RO-1887
Date: 05.05.2017
Topic:
M-ERA.NET 1 - 2017:
Integrated computational materials engineering (ICME)

M-ERA.NET 2 - 2017:
Innovative surfaces, coatings and interfaces
Institution: Technical University of Cluj-Napoca/ Micro & Nano Systems Laboratory
Profile/Expertise: see attachment


ID: PO-17-DE-1886
Date: 03.05.2017
Topic:
M-ERA.NET 2 - 2017:
Innovative surfaces, coatings and interfaces

M-ERA.NET 6 - 2017:
Materials for additive manufacturing
Institution: Technische Universität Chemnitz
Profile/Expertise: see attachment


ID: PS-17-ES-1885
Date: 03.05.2017
Topic:
M-ERA.NET 4 - 2017:
Multifunctional materials
Institution: IMDEA Materials Institute
Profile/Expertise: see attachment


ID: PO-17-DE-1884
Date: 02.05.2017
Topic:
M-ERA.NET 2 - 2017:
Innovative surfaces, coatings and interfaces

M-ERA.NET 6 - 2017:
Materials for additive manufacturing
Institution: Fraunhofer Institute for Solar Energy Systems ISE
Profile/Expertise: see attachment


ID: PS-17-RO-1883
Date: 28.04.2017
Topic:
FETOPEN-1-2016/2017:
FET-Open Research and Innovation Actions

M-ERA.NET 4 - 2017:
Multifunctional materials

NMBP-25-2017:
Next generation system integrating tangible and intangible materials model components to support innovation in industry
Institution: National R&D Institute for Food Bioresources - IBA Bucharest
Profile/Expertise: see attachment


ID: PO-17-DE-1882
Date: 18.04.2017
Topic:
MANUNET 2017 - d.:
New materials for manufacturing (alloys, lubricants, coatings, textile fibres, construction, composites, insulation, etc.)
Institution: TU Darmstadt - Institut EMK
Profile/Expertise: see attachment


ID: PO-17-UA-1879
Date: 05.04.2017
Topic:
SPIRE-07-2017:
Integrated approach to process optimisation for raw material resources efficiency, excluding recovery technologies of waste streams
Institution: Sumy State University
Profile/Expertise: see attachment


ID: PS-17-BG-1876
Date: 28.03.2017
Topic:
MANUNET 2017 - e.:
New manufacturing methods, components and systems (development of demonstrators, devices, tooling and equipment, logistic systems, etc.)

NMBP-21-2016:
ERA-NET on manufacturing technologies supporting industry and particularly SMEs in the global __br__competition
Institution: University of Transport
Profile/Expertise: see attachment


ID: PO-17-PL-1875
Date: 25.03.2017
Topic:
M-ERA.NET 2 - 2017:
Innovative surfaces, coatings and interfaces

M-ERA.NET 3 - 2017:
High performance composites

M-ERA.NET 4 - 2017:
Multifunctional materials
Institution: NanoBiomedical Centre
Profile/Expertise: see attachment


ID: PS-17-RO-1874
Date: 23.03.2017
Topic:
M-ERA.NET 1 - 2017:
Integrated computational materials engineering (ICME)
Institution: National Institute of Research and Development for Optoelectronics INOE 2000
Profile/Expertise: see attachment


ID: PS-17-RO-1873
Date: 23.03.2017
Topic:
M-ERA.NET 2 - 2017:
Innovative surfaces, coatings and interfaces
Institution: National Institute of Research and Development for Optoelectronics INOE 2000
Profile/Expertise: see attachment


ID: PO-17-RO-1872
Date: 22.03.2017
Topic:
M-ERA.NET 1 - 2017:
Integrated computational materials engineering (ICME)
Institution: National Institute of Research and Development for Optoelectronics INOE 2000
Profile/Expertise: see attachment


ID: PO-17-EE-1866
Date: 19.03.2017
Topic:
FOF-08-2017:
In-line measurement and control for micro-/nano-enabled high-volume manufacturing for enhanced reliability

FOF-09-2017:
Novel design and predictive maintenance technologies for increased operating life of production systems

FOF-12-2017:
ICT Innovation for Manufacturing SMEs (I4MS)
Institution: Tallinn University of Technology (TTU), T J Seebeck Department of Electronics
Profile/Expertise: see attachment


ID: PO-17-EE-1865
Date: 19.03.2017
Topic:
M-ERA.NET 2 - 2017:
Innovative surfaces, coatings and interfaces

M-ERA.NET 3 - 2017:
High performance composites
Institution: Tallinn University of Technology (TTU), T J Seebeck Department of Electronics
Profile/Expertise: see attachment


ID: PS-17-EE-1864
Date: 19.03.2017
Topic:
M-ERA.NET 2 - 2017:
Innovative surfaces, coatings and interfaces

M-ERA.NET 3 - 2017:
High performance composites

FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production
Institution: Tallinn University of Technology (TTU), T J Seebeck Department of Electronics
Profile/Expertise: see attachment


ID: PO-17-RO-1862
Date: 16.03.2017
Topic:
SMEInst-02-2016-2017:
Accelerating the uptake of nanotechnologies, advanced materials or advanced manufacturing and processing technologies by SMEs

MANUNET 2017 - d.:
New materials for manufacturing (alloys, lubricants, coatings, textile fibres, construction, composites, insulation, etc.)

NMBP-20-2017:
High-performance materials for optimizing CO2 capture
Institution: IMNR
Profile/Expertise: see attachment


ID: PO-17-SI-1861
Date: 16.03.2017
Topic:
M-ERA.NET 1 - 2017:
Integrated computational materials engineering (ICME)

M-ERA.NET 2 - 2017:
Innovative surfaces, coatings and interfaces

M-ERA.NET 4 - 2017:
Multifunctional materials
Institution: National Institute of Chemistry Slovenia
Profile/Expertise: see attachment


ID: PO-17-SI-1860
Date: 16.03.2017
Topic:
M-ERA.NET 1 - 2017:
Integrated computational materials engineering (ICME)

M-ERA.NET 2 - 2017:
Innovative surfaces, coatings and interfaces

M-ERA.NET 4 - 2017:
Multifunctional materials
Institution: National Institute of Chemistry
Profile/Expertise: see attachment


ID: PO-17-LV-1859
Date: 16.03.2017
Topic:
M-ERA.NET 1 - 2017:
Integrated computational materials engineering (ICME)

M-ERA.NET 3 - 2017:
High performance composites

M-ERA.NET 4 - 2017:
Multifunctional materials
Institution: Institute of Materials and Structures, Riga Technical University
Profile/Expertise: see attachment


ID: PS-17-DE-1855
Date: 07.03.2017
Topic:
M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

MANUNET 2017 - e.:
New manufacturing methods, components and systems (development of demonstrators, devices, tooling and equipment, logistic systems, etc.)

MANUNET 2017 - f.:
Other technologies, products and services related to the manufacturing field
Institution: Laser group, Institute of Optics and Atomic Physics, Technical University of Berlin
Profile/Expertise: see attachment


ID: PO-17-DE-1854
Date: 07.03.2017
Topic:
M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

MANUNET 2017 - d.:
New materials for manufacturing (alloys, lubricants, coatings, textile fibres, construction, composites, insulation, etc.)

FOF-13-2017:
Photonics Laser-based production
Institution: Laser group, Institute of Optics and Atomic Physics, Technical University of Berlin
Profile/Expertise: see attachment


ID: PS-17-FR-1852
Date: 03.03.2017
Topic:
NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation
Institution: CNRS - IEMN
Profile/Expertise: see attachment


ID: PO-17-RO-1840
Date: 02.02.2017
Topic:
MANUNET 2017 - a.:
Knowledge-based engineering, information and communication technologies for manufacturing (industrial robotics, computer-aided engineering and design, automated manufacturing, zero defect manufacturing, product lifetime management, etc.)

MANUNET 2017 - b.:
Manufacturing technologies for environmental and energy applications including resource efficiency and recycling

MANUNET 2017 - e.:
New manufacturing methods, components and systems (development of demonstrators, devices, tooling and equipment, logistic systems, etc.)
Institution: Icpe
Profile/Expertise: see attachment


ID: PO-17-DE-1839
Date: 31.01.2017
Topic:
MANUNET 2017 - b.:
Manufacturing technologies for environmental and energy applications including resource efficiency and recycling

MANUNET 2017 - e.:
New manufacturing methods, components and systems (development of demonstrators, devices, tooling and equipment, logistic systems, etc.)
Institution: Technische Universität Chemnitz
Profile/Expertise: see attachment


ID: PO-17-IT-1838
Date: 27.01.2017
Topic:
SMEInst-02-2016-2017:
Accelerating the uptake of nanotechnologies, advanced materials or advanced manufacturing and processing technologies by SMEs

NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation

NMBP-15-2017:
Nanotechnologies for imaging cellular transplants and regenerative processes in vivo
Institution: APEResearch srl
Profile/Expertise: see attachment


ID: PO-17-FR-1836
Date: 03.01.2017
Topic:
NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

NMBP-21-2016:
ERA-NET on manufacturing technologies supporting industry and particularly SMEs in the global __br__competition

BIOTEC-02-2016:
Bioconversion of non-agricultural waste into biomolecules for industrial applications
Institution: Denis & Fils
Profile/Expertise: see attachment


ID: PO-16-DK-1832
Date: 19.12.2016
Topic:
FTI:
Fast Track to Innovation - Pilot

PILOTS-04-2017:
Pilot Lines for 3D printed and/or injection moulded polymeric or ceramic microfluidic MEMS

PILOTS-05-2017:
Paper-based electronics
Institution: Danish Technological Institute
Profile/Expertise: see attachment


ID: PO-16-IL-1831
Date: 16.12.2016
Topic:
NMBP-02-2016:
Advanced Materials for Power Electronics based on wide bandgap semiconductor devices technology

NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods
Institution: Israel Plastics and Rubber Center (IPRC)
Profile/Expertise: see attachment


ID: PO-16-FI-1830
Date: 26.11.2016
Topic:
PILOTS-03-2017:
Pilot Lines for Manufacturing of Nanotextured surfaces with enhanced mechanical properties

FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production
Institution: Kraftonweg OY
Profile/Expertise: see attachment


ID: PO-16-CH-1827
Date: 16.11.2016
Topic:
EEB-03-2016:
Integration of advanced technologies for heating and cooling at building and district level

EEB-05-2017:
Development of near zero energy building renovation

EEB-07-2017:
Integration of energy harvesting at building and district level
Institution: University of Applied Sciences and Arts Northwestern Switzerland
Profile/Expertise: see attachment


ID: PS-16-IT-1826
Date: 16.11.2016
Topic:
FOF-07-2017:
Integration of unconventional technologies for multi-material processing into manufacturing systems
Institution: Ecor Research Spa
Profile/Expertise: see attachment


ID: PO-16-IT-1825
Date: 07.11.2016
Topic:
SMEInst-02-2016-2017:
Accelerating the uptake of nanotechnologies, advanced materials or advanced manufacturing and processing technologies by SMEs

M-ERA.NET 5 - 2016:
Interfaces between materials and biological hosts for health applications

NMBP-12-2017:
Development of a reliable methodology for better risk management of engineered Biomaterials in Advanced Therapy Medicinal Products and/or Medical Devices
Institution: istituto italiano di tecnologia
Profile/Expertise: see attachment


ID: PO-16-DE-1824
Date: 24.10.2016
Topic:
NMBP-19-2017:
Cost-effective materials for \"power-to-chemical\" technologies
Institution: TU Nuremberg
Profile/Expertise: see attachment


ID: PO-16-FR-1820
Date: 18.10.2016
Topic:
FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production

FOF-07-2017:
Integration of unconventional technologies for multi-material processing into manufacturing systems

SPIRE-10-2017:
New electrochemical solutions for industrial processing, which contribute to a reduction of carbon dioxide emissions
Institution: IRT-M2P
Profile/Expertise: see attachment


ID: PO-16-IT-1814
Date: 03.10.2016
Topic:
FTI:
Fast Track to Innovation - Pilot
Institution: idea-re
Profile/Expertise: see attachment


ID: PO-16-FR-1813
Date: 28.09.2016
Topic:
SMEInst-03-2016-2017:
Dedicated support to biotechnology SMEs closing the gap from lab to market
Institution: Firalis
Profile/Expertise: see attachment


ID: PO-16-PT-1811
Date: 26.09.2016
Topic:
FTI:
Fast Track to Innovation - Pilot

SMEInst-03-2016-2017:
Dedicated support to biotechnology SMEs closing the gap from lab to market
Institution: StemCell2MAX
Profile/Expertise: see attachment


ID: PO-16-NO-1809
Date: 20.09.2016
Topic:
NMBP-29-2017:
Advanced and realistic models and assays for nanomaterial hazard assessment

NMBP-35-2017:
Innovative solutions for the conservation of 20th century cultural heritage
Institution: Stiftinga Vestlandsforsking / Western Norway Research Institute (WNRI)
Profile/Expertise: see attachment


ID: PO-16-NO-1808
Date: 20.09.2016
Topic:
NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore

NMBP-20-2017:
High-performance materials for optimizing CO2 capture
Institution: Stiftinga Vestlandsforsking / Western Norway Research Institute (WNRI)
Profile/Expertise: see attachment


ID: PO-16-ES-1807
Date: 15.09.2016
Topic:
PILOTS-04-2017:
Pilot Lines for 3D printed and/or injection moulded polymeric or ceramic microfluidic MEMS
Institution: Eurecat Technology Centre
Profile/Expertise: see attachment


ID: PO-16-PL-1806
Date: 15.09.2016
Topic:
NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore
Institution: Industrial Chemistry Research Institute
Profile/Expertise: see attachment


ID: PS-16-FR-1805
Date: 13.09.2016
Topic:
FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production
Institution: Euronovia
Profile/Expertise: see attachment


ID: PO-16-ES-1804
Date: 07.09.2016
Topic:
NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

M-ERA.NET 5 - 2016:
Interfaces between materials and biological hosts for health applications

NMBP-12-2017:
Development of a reliable methodology for better risk management of engineered Biomaterials in Advanced Therapy Medicinal Products and/or Medical Devices
Institution: FUNDACIÓN PERSONAS
Profile/Expertise: see attachment


ID: PO-16-IT-1803
Date: 05.09.2016
Topic:
PILOTS-03-2017:
Pilot Lines for Manufacturing of Nanotextured surfaces with enhanced mechanical properties

NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods
Institution: Dept. Industrial Engineering - University of Parma
Profile/Expertise: see attachment


ID: PO-16-IT-1802
Date: 05.09.2016
Topic:
M-ERA.NET 1 - 2016:
Integrated computational materials engineering

M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

M-ERA.NET 3 - 2016:
High performance synthetic and biobased composites
Institution: Dept. Industrial Engineering - University of Parma
Profile/Expertise: see attachment


ID: PS-16-IN-1801
Date: 02.09.2016
Topic:
NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore
Institution: CSIR-Central Building Research Institute
Profile/Expertise: see attachment


ID: PO-16-DE-1800
Date: 18.08.2016
Topic:
NMBP-22-2017:
Business models and industrial strategies supporting novel supply chains for innovative product-services
Institution: Karlsruhe University of Applied Sciences
Profile/Expertise: see attachment


ID: PO-16-CH-1799
Date: 18.08.2016
Topic:
NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation

FOF-12-2017:
ICT Innovation for Manufacturing SMEs (I4MS)

NMBP-19-2017:
Cost-effective materials for \"power-to-chemical\" technologies
Institution: FSRM Swiss Foundation for Research in Microtechnology
Profile/Expertise: see attachment


ID: PO-16-GB-1797
Date: 16.08.2016
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

M-ERA.NET 4 - 2016:
Functional materials

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods
Institution: University of Bath
Profile/Expertise: see attachment


ID: PO-16-DE-1796
Date: 15.08.2016
Topic:
NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods
Institution: Fraunhofer Institute for Surface Engineering and Thin Films IST
Profile/Expertise: see attachment


ID: PO-16-LT-1795
Date: 09.08.2016
Topic:
NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation
Institution: State research institute Center for Physical Sciences and Techology
Profile/Expertise: see attachment


ID: PO-16-AT-1794
Date: 03.08.2016
Topic:
NMBP-15-2017:
Nanotechnologies for imaging cellular transplants and regenerative processes in vivo
Institution: Vienna Biocenter Core Facilities
Profile/Expertise: see attachment


ID: PO-16-ES-1791
Date: 27.07.2016
Topic:
FOF-01-2016:
Novel hybrid approaches for additive and subtractive manufacturing machines

NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore
Institution: Avanzare Innovacion Tecnologica SL
Profile/Expertise: see attachment


ID: PO-16-DE-1789
Date: 25.07.2016
Topic:
NMBP-19-2017:
Cost-effective materials for \"power-to-chemical\" technologies
Institution: Fraunhofer Institute for Chemical Technology (ICT)
Profile/Expertise: see attachment


ID: PO-16-IE-1788
Date: 20.07.2016
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation

BIOTEC-06-2017:
Optimisation of biocatalysis and downstream processing for the sustainable production of high added-value platform chemicals
Institution: Synthesis and Solid State Pharmaceutical Centre
Profile/Expertise: see attachment


ID: PO-16-ES-1787
Date: 19.07.2016
Topic:
NMBP-15-2017:
Nanotechnologies for imaging cellular transplants and regenerative processes in vivo
Institution: Centro Tecnológico LUrederra
Profile/Expertise: see attachment


ID: PO-16-ES-1786
Date: 19.07.2016
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures
Institution: Centro Tecnológico LUrederra
Profile/Expertise: see attachment


ID: PS-16-ES-1785
Date: 15.07.2016
Topic:
NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods
Institution: Centro Tecnológico LUrederra
Profile/Expertise: see attachment


ID: PO-16-DE-1783
Date: 07.07.2016
Topic:
FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production

FOF-07-2017:
Integration of unconventional technologies for multi-material processing into manufacturing systems

FOF-08-2017:
In-line measurement and control for micro-/nano-enabled high-volume manufacturing for enhanced reliability
Institution: Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM
Profile/Expertise: see attachment


ID: PO-16-DE-1782
Date: 07.07.2016
Topic:
SPIRE-08-2017:
Carbon dioxide Utilisation to produce high added value chemicals

BIOTEC-05-2017:
Microbial platforms for CO2-reuse processes in the low-carbon economy
Institution: Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM
Profile/Expertise: see attachment


ID: PO-16-DE-1781
Date: 07.07.2016
Topic:
PILOTS-04-2017:
Pilot Lines for 3D printed and/or injection moulded polymeric or ceramic microfluidic MEMS
Institution: Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM
Profile/Expertise: see attachment


ID: PO-16-CH-1780
Date: 07.07.2016
Topic:
PILOTS-03-2017:
Pilot Lines for Manufacturing of Nanotextured surfaces with enhanced mechanical properties

FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production

NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation
Institution: Alemnis AG
Profile/Expertise: see attachment


ID: PO-16-ES-1779
Date: 06.07.2016
Topic:
NMBP-13-2017:
Cross-cutting KETs for diagnostics at the point-of-care
Institution: Eurecat Technology Centre
Profile/Expertise: see attachment


ID: PO-16-FR-1778
Date: 04.07.2016
Topic:
SPIRE-08-2017:
Carbon dioxide Utilisation to produce high added value chemicals

NMBP-20-2017:
High-performance materials for optimizing CO2 capture
Institution: Université Claude Bernard Lyon 1
Profile/Expertise: see attachment


ID: PS-16-DE-1776
Date: 28.06.2016
Topic:
NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore
Institution: Leibniz Institute of Polymer Research Dresden (IPF)
Profile/Expertise: see attachment


ID: PO-16-DE-1775
Date: 27.06.2016
Topic:
NMBP-29-2017:
Advanced and realistic models and assays for nanomaterial hazard assessment
Institution: DIN Standards Committee Materials Testing
Profile/Expertise: see attachment


ID: PO-16-DE-1774
Date: 27.06.2016
Topic:
NMBP-28-2017:
Framework and strategies for nanomaterial characterisation, classification, grouping and read-across for risk analysis
Institution: DIN Standards Committee Materials Testing
Profile/Expertise: see attachment


ID: PO-16-DE-1773
Date: 27.06.2016
Topic:
NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation
Institution: DIN Standards Committee Materials Testing
Profile/Expertise: see attachment


ID: PO-16-DE-1772
Date: 27.06.2016
Topic:
NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore
Institution: DIN Standards Committee Materials Testing
Profile/Expertise: see attachment


ID: PO-16-DE-1771
Date: 27.06.2016
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures
Institution: DIN Standards Committee Materials Testing
Profile/Expertise: see attachment


ID: PO-16-IT-1769
Date: 21.06.2016
Topic:
NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore
Institution: Pontlab S.r.l.
Profile/Expertise: see attachment


ID: PO-16-NO-1768
Date: 15.06.2016
Topic:
SPIRE-08-2017:
Carbon dioxide Utilisation to produce high added value chemicals

NMBP-19-2017:
Cost-effective materials for \"power-to-chemical\" technologies

NMBP-20-2017:
High-performance materials for optimizing CO2 capture
Institution: Ceramic Powder Technology AS
Profile/Expertise: see attachment


ID: PO-16-GB-1767
Date: 09.06.2016
Topic:
NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore
Institution: AkzoNobel Performance Coatings
Profile/Expertise: see attachment


ID: PO-16-ES-1765
Date: 03.06.2016
Topic:
M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

M-ERA.NET 3 - 2016:
High performance synthetic and biobased composites

M-ERA.NET 4 - 2016:
Functional materials
Institution: ITENE
Profile/Expertise: see attachment


ID: PO-16-PT-1764
Date: 01.06.2016
Topic:
M-ERA.NET 5 - 2016:
Interfaces between materials and biological hosts for health applications

NMBP-28-2017:
Framework and strategies for nanomaterial characterisation, classification, grouping and read-across for risk analysis

NMBP-29-2017:
Advanced and realistic models and assays for nanomaterial hazard assessment
Institution: University of Aveiro
Profile/Expertise: see attachment


ID: PO-16-IT-1763
Date: 01.06.2016
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods
Institution: Alma mater UNIVERSITA di BOLOGNA
Profile/Expertise: see attachment


ID: PO-16-IT-1754
Date: 27.05.2016
Topic:
EEB-08-2017:
New business models for energy-efficient buildings through adaptable refurbishment solutions

NMBP-16-2017:
Mobilising the European nano-biomedical ecosystem
Institution: Technological District Micro and Nano Systems of Sicily
Profile/Expertise: see attachment


ID: PO-16-SI-1753
Date: 27.05.2016
Topic:
M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

M-ERA.NET 4 - 2016:
Functional materials

M-ERA.NET 5 - 2016:
Interfaces between materials and biological hosts for health applications
Institution: Jozef Stefan Institute, Advanced Materials Department
Profile/Expertise: see attachment


ID: PO-16-PT-1752
Date: 27.05.2016
Topic:
M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

M-ERA.NET 4 - 2016:
Functional materials

NMBP-17-2016:
Advanced materials solutions and architectures for high efficiency solar energy harvesting
Institution: Instituto de Telecomunicações
Profile/Expertise: see attachment


ID: PS-16-IT-1751
Date: 25.05.2016
Topic:
M-ERA.NET 5 - 2016:
Interfaces between materials and biological hosts for health applications
Institution: Politecnico di Bari - Department of Mechanical Engineering, Mathematics & Management Engineering
Profile/Expertise: see attachment


ID: PO-16-CZ-1750
Date: 24.05.2016
Topic:
NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation
Institution: University of Chemistry and Technology Prague
Profile/Expertise: see attachment


ID: PO-16-IT-1749
Date: 19.05.2016
Topic:
M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

PILOTS-03-2017:
Pilot Lines for Manufacturing of Nanotextured surfaces with enhanced mechanical properties

FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production
Institution: DISMI - University of Modena and Reggio Emilia
Profile/Expertise: see attachment


ID: PO-16-IT-1748
Date: 19.05.2016
Topic:
M-ERA.NET 5 - 2016:
Interfaces between materials and biological hosts for health applications

BIOTEC-06-2017:
Optimisation of biocatalysis and downstream processing for the sustainable production of high added-value platform chemicals
Institution: DISMI - University of Modena and Reggio Emilia
Profile/Expertise: see attachment


ID: PO-16-SI-1745
Date: 10.05.2016
Topic:
M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

M-ERA.NET 4 - 2016:
Functional materials
Institution: Jozef Stefan Institute-Advanced Materials
Profile/Expertise: see attachment


ID: PO-16-DE-1743
Date: 09.05.2016
Topic:
NMBP-15-2017:
Nanotechnologies for imaging cellular transplants and regenerative processes in vivo
Institution: Fraunhofer Institute for Silicate Research ISC
Profile/Expertise: see attachment


ID: PO-16-IT-1742
Date: 09.05.2016
Topic:
FETOPEN-1-2016/2017:
FET-Open Research and Innovation Actions

EEB-07-2017:
Integration of energy harvesting at building and district level

NMBP-19-2017:
Cost-effective materials for \"power-to-chemical\" technologies
Institution: CNR-ICMATE and Department of Chemistry, Padova University
Profile/Expertise: see attachment


ID: PO-16-IT-1740
Date: 06.05.2016
Topic:
NMBP-01-2016:
Novel hybrid materials for heterogeneous catalysis

M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

M-ERA.NET 4 - 2016:
Functional materials
Institution: Alma mater UNIVERSITA di BOLOGNA
Profile/Expertise: see attachment


ID: PS-16-IT-1739
Date: 06.05.2016
Topic:
M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

M-ERA.NET 4 - 2016:
Functional materials

NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore
Institution: Alma mater UNIVERSITA di BOLOGNA
Profile/Expertise: see attachment


ID: PO-16-ES-1738
Date: 05.05.2016
Topic:
M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

M-ERA.NET 3 - 2016:
High performance synthetic and biobased composites

M-ERA.NET 5 - 2016:
Interfaces between materials and biological hosts for health applications
Institution: University of Córdoba
Profile/Expertise: see attachment


ID: PO-16-IT-1737
Date: 04.05.2016
Topic:
M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

M-ERA.NET 4 - 2016:
Functional materials

NMBP-20-2017:
High-performance materials for optimizing CO2 capture
Institution: Department of Chemistry and Chemical Technologies, Universty of Calabria
Profile/Expertise: see attachment


ID: PO-16-IT-1736
Date: 04.05.2016
Topic:
M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

SPIRE-08-2017:
Carbon dioxide Utilisation to produce high added value chemicals

SPIRE-10-2017:
New electrochemical solutions for industrial processing, which contribute to a reduction of carbon dioxide emissions
Institution: University of Torino
Profile/Expertise: see attachment


ID: PO-16-ES-1734
Date: 21.04.2016
Topic:
NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore

NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation
Institution: ITeC - The Catalonia Institute of Construction Technology
Profile/Expertise: see attachment


ID: PO-16-ES-1733
Date: 21.04.2016
Topic:
EEB-06-2017:
Highly efficient hybrid storage solutions for power and heat in residential buildings and district areas, balancing the supply and demand conditions

EEB-07-2017:
Integration of energy harvesting at building and district level
Institution: ITeC - The Catalonia Institute of Construction Technology
Profile/Expertise: see attachment


ID: PO-16-ES-1732
Date: 21.04.2016
Topic:
EEB-05-2017:
Development of near zero energy building renovation

EEB-08-2017:
New business models for energy-efficient buildings through adaptable refurbishment solutions
Institution: ITeC - The Catalonia Institute of Construction Technology
Profile/Expertise: see attachment


ID: PO-16-ES-1731
Date: 18.04.2016
Topic:
M-ERA.NET 5 - 2016:
Interfaces between materials and biological hosts for health applications
Institution: Consejo Superior de Investigaciones Científicas (CSIC). Centro Nacional de investigaciones metalúrgicas (CENIM)
Profile/Expertise: see attachment


ID: PO-16-NL-1730
Date: 18.04.2016
Topic:
M-ERA.NET 5 - 2016:
Interfaces between materials and biological hosts for health applications
Institution: Maastricht University
Profile/Expertise: see attachment


ID: PO-16-DE-1729
Date: 14.04.2016
Topic:
M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces

M-ERA.NET 4 - 2016:
Functional materials

NMBP-19-2017:
Cost-effective materials for \"power-to-chemical\" technologies
Institution: Karlsruhe Institute for Technology (KIT) / Helmholtz Institute Ulm (HIU)
Profile/Expertise: see attachment


ID: PO-16-DE-1728
Date: 13.04.2016
Topic:
SPIRE-08-2017:
Carbon dioxide Utilisation to produce high added value chemicals

NMBP-20-2017:
High-performance materials for optimizing CO2 capture

BIOTEC-05-2017:
Microbial platforms for CO2-reuse processes in the low-carbon economy
Institution: University of Stuttgart, Department of Life Cycle Engineering
Profile/Expertise: see attachment


ID: PO-16-IE-1725
Date: 05.04.2016
Topic:
M-ERA.NET 6 - 2016:
Materials for additive manufacturing
Institution: SEAM, Waterford Institute of Technology
Profile/Expertise: see attachment


ID: PO-16-IE-1724
Date: 05.04.2016
Topic:
FOF-10-2017:
New technologies and life cycle management for reconfigurable and reusable customised products
Institution: SEAM, Waterford Institute of Technology
Profile/Expertise: see attachment


ID: PO-16-IR-1723
Date: 02.04.2016
Topic:
SMEInst-02-2016-2017:
Accelerating the uptake of nanotechnologies, advanced materials or advanced manufacturing and processing technologies by SMEs

EEB-04-2016:
New technologies and strategies for the development of pre-fabricated elements through the reuse and recycling of construction materials and structures

NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore
Institution: KILOPICO Aryan
Profile/Expertise: see attachment


ID: PO-16-TR-1720
Date: 31.03.2016
Topic:
M-ERA.NET 1 - 2016:
Integrated computational materials engineering

NMBP-20-2017:
High-performance materials for optimizing CO2 capture

NMBP-24-2016:
Network to capitalise on strong European position in materials modelling and to allow industry to reap the benefits
Institution: Department of Chemical Engineering, Istanbul Technical University
Profile/Expertise: see attachment


ID: PO-16-RU-1719
Date: 31.03.2016
Topic:
SMEInst-02-2016-2017:
Accelerating the uptake of nanotechnologies, advanced materials or advanced manufacturing and processing technologies by SMEs
Institution: Envidatec Ost LLC
Profile/Expertise: see attachment


ID: PO-16-ES-1718
Date: 30.03.2016
Topic:
EEB-05-2017:
Development of near zero energy building renovation
Institution: Technical University of Madrid
Profile/Expertise: see attachment


ID: PS-16-SI-1715
Date: 23.03.2016
Topic:
NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation

FOF-08-2017:
In-line measurement and control for micro-/nano-enabled high-volume manufacturing for enhanced reliability

FOF-09-2017:
Novel design and predictive maintenance technologies for increased operating life of production systems
Institution: HIDRIA d.o.o.
Profile/Expertise: see attachment


ID: PO-16-HR-1714
Date: 23.03.2016
Topic:
NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

EEB-07-2017:
Integration of energy harvesting at building and district level
Institution: University of Rijeka, Faculty of Engineering
Profile/Expertise: see attachment


ID: PO-16-NO-1713
Date: 22.03.2016
Topic:
SPIRE-08-2017:
Carbon dioxide Utilisation to produce high added value chemicals

NMBP-19-2017:
Cost-effective materials for \"power-to-chemical\" technologies

NMBP-20-2017:
High-performance materials for optimizing CO2 capture
Institution: Ceramic Powder Technology AS
Profile/Expertise: see attachment


ID: PO-16-IT-1712
Date: 18.03.2016
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-28-2017:
Framework and strategies for nanomaterial characterisation, classification, grouping and read-across for risk analysis
Institution: Engineering Department, University of Ferrara
Profile/Expertise: see attachment


ID: PO-16-IT-1711
Date: 18.03.2016
Topic:
M-ERA.NET 1 - 2016:
Integrated computational materials engineering

M-ERA.NET 2 - 2016:
Innovative surfaces, coatings and interfaces
Institution: Engineering Department, University of Ferrara
Profile/Expertise: see attachment


ID: PO-16-ES-1710
Date: 18.03.2016
Topic:
NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore

NMBP-35-2017:
Innovative solutions for the conservation of 20th century cultural heritage
Institution: Centro Tecnológico LUrederra
Profile/Expertise: see attachment


ID: PO-16-CH-1709
Date: 17.03.2016
Topic:
NMBP-35-2017:
Innovative solutions for the conservation of 20th century cultural heritage
Institution: Bern University of the Arts, Switzerland
Profile/Expertise: see attachment


ID: PO-16-CY-1708
Date: 16.03.2016
Topic:
M-ERA.NET 1 - 2016:
Integrated computational materials engineering
Institution: NovaMechanics Ltd
Profile/Expertise: see attachment


ID: PO-16-BY-1707
Date: 16.03.2016
Topic:
NMBP-01-2016:
Novel hybrid materials for heterogeneous catalysis

NMBP-17-2016:
Advanced materials solutions and architectures for high efficiency solar energy harvesting
Institution: Belarusian State University of Informatics and Radioelectronics
Profile/Expertise: see attachment


ID: PO-16-ES-1706
Date: 15.03.2016
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore

NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation
Institution: Instituto Tecnologico de Aragon
Profile/Expertise: see attachment


ID: PO-16-FR-1705
Date: 11.03.2016
Topic:
EEB-05-2017:
Development of near zero energy building renovation

FOF-09-2017:
Novel design and predictive maintenance technologies for increased operating life of production systems

FOF-12-2017:
ICT Innovation for Manufacturing SMEs (I4MS)
Institution: Wavestone
Profile/Expertise: see attachment


ID: PO-16-IE-1704
Date: 08.03.2016
Topic:
NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

NMBP-28-2017:
Framework and strategies for nanomaterial characterisation, classification, grouping and read-across for risk analysis

NMBP-29-2017:
Advanced and realistic models and assays for nanomaterial hazard assessment
Institution: Dublin Institute of Technology
Profile/Expertise: see attachment


ID: PO-16-IE-1703
Date: 08.03.2016
Topic:
PILOTS-02-2016:
Pilot Line Manufacturing of Nanostructured Antimicrobial Surfaces using Advanced Nanosurface Functionalization Technologies

PILOTS-03-2017:
Pilot Lines for Manufacturing of Nanotextured surfaces with enhanced mechanical properties

PILOTS-04-2017:
Pilot Lines for 3D printed and/or injection moulded polymeric or ceramic microfluidic MEMS
Institution: Dublin Institute of Technology
Profile/Expertise: see attachment


ID: PO-16-ES-1702
Date: 07.03.2016
Topic:
PILOTS-03-2017:
Pilot Lines for Manufacturing of Nanotextured surfaces with enhanced mechanical properties

PILOTS-04-2017:
Pilot Lines for 3D printed and/or injection moulded polymeric or ceramic microfluidic MEMS
Institution: EKOTEK
Profile/Expertise: see attachment


ID: PO-16-ES-1701
Date: 07.03.2016
Topic:
FOF-08-2017:
In-line measurement and control for micro-/nano-enabled high-volume manufacturing for enhanced reliability
Institution: EKOTEK
Profile/Expertise: see attachment


ID: PO-16-ES-1699
Date: 07.03.2016
Topic:
EEB-05-2017:
Development of near zero energy building renovation

EEB-08-2017:
New business models for energy-efficient buildings through adaptable refurbishment solutions
Institution: EKOTEK
Profile/Expertise: see attachment


ID: PO-16-ES-1698
Date: 07.03.2016
Topic:
SPIRE-07-2017:
Integrated approach to process optimisation for raw material resources efficiency, excluding recovery technologies of waste streams

SPIRE-09-2017:
Pilot lines based on more flexible and down-scaled high performance processing

SPIRE-12-2017:
Assessment of standardisation needs and ways to overcome regulatory bottlenecks in the process industry
Institution: EKOTEK
Profile/Expertise: see attachment


ID: PO-16-ES-1697
Date: 07.03.2016
Topic:
SPIRE-08-2017:
Carbon dioxide Utilisation to produce high added value chemicals

SPIRE-10-2017:
New electrochemical solutions for industrial processing, which contribute to a reduction of carbon dioxide emissions
Institution: EKOTEK
Profile/Expertise: see attachment


ID: PO-16-ES-1696
Date: 07.03.2016
Topic:
NMBP-28-2017:
Framework and strategies for nanomaterial characterisation, classification, grouping and read-across for risk analysis

NMBP-29-2017:
Advanced and realistic models and assays for nanomaterial hazard assessment

NMBP-34-2017:
Governing innovation of nanotechnology through enhanced societal engagement
Institution: EKOTEK
Profile/Expertise: see attachment


ID: PO-16-ES-1695
Date: 07.03.2016
Topic:
NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore

NMBP-22-2017:
Business models and industrial strategies supporting novel supply chains for innovative product-services
Institution: EKOTEK
Profile/Expertise: see attachment


ID: PO-16-DE-1693
Date: 01.03.2016
Topic:
FTI:
Fast Track to Innovation - Pilot

SMEInst-02-2016-2017:
Accelerating the uptake of nanotechnologies, advanced materials or advanced manufacturing and processing technologies by SMEs

NMBP-03-2016:
Innovative and sustainable materials solutions for the substitution of critical raw materials in the electric power system
Institution: MEMBRASENZ
Profile/Expertise: see attachment


ID: PO-16-IT-1672
Date: 25.02.2016
Topic:
NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle

NMBP-19-2017:
Cost-effective materials for \"power-to-chemical\" technologies
Institution: Mec srl
Profile/Expertise: see attachment


ID: PO-16-ES-1671
Date: 18.02.2016
Topic:
PILOTS-04-2017:
Pilot Lines for 3D printed and/or injection moulded polymeric or ceramic microfluidic MEMS

PILOTS-05-2017:
Paper-based electronics
Institution: Andaltec R&D
Profile/Expertise: see attachment


ID: PO-16-ES-1670
Date: 18.02.2016
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore
Institution: Andaltec R&D
Profile/Expertise: see attachment


ID: PS-16-ES-1667
Date: 11.02.2016
Topic:
FTI:
Fast Track to Innovation - Pilot
Institution: Centro Tecnológico del Calzado y el Plástico de la Región de Murcia
Profile/Expertise: see attachment


ID: PS-16-SI-1666
Date: 10.02.2016
Topic:
FTI:
Fast Track to Innovation - Pilot

NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle

FOF-08-2017:
In-line measurement and control for micro-/nano-enabled high-volume manufacturing for enhanced reliability
Institution: HIDRIA d.o.o.
Profile/Expertise: see attachment


ID: PS-16-SI-1665
Date: 09.02.2016
Topic:
FOF-07-2017:
Integration of unconventional technologies for multi-material processing into manufacturing systems

NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle

FOF-09-2017:
Novel design and predictive maintenance technologies for increased operating life of production systems
Institution: HIDRIA d.o.o.
Profile/Expertise: see attachment


ID: PO-16-NO-1664
Date: 09.02.2016
Topic:
NMBP-12-2017:
Development of a reliable methodology for better risk management of engineered Biomaterials in Advanced Therapy Medicinal Products and/or Medical Devices

NMBP-19-2017:
Cost-effective materials for \"power-to-chemical\" technologies

NMBP-28-2017:
Framework and strategies for nanomaterial characterisation, classification, grouping and read-across for risk analysis
Institution: Stiftinga Vestlandsforsking / Western Norway Research Institute (WNRI)
Profile/Expertise: see attachment


ID: PS-16-IL-1663
Date: 09.02.2016
Topic:
PILOTS-01-2016:
Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties

FTI:
Fast Track to Innovation - Pilot

FETOPEN-1-2016/2017:
FET-Open Research and Innovation Actions
Institution: Lingacom Ltd
Profile/Expertise: see attachment


ID: PO-16-NO-1661
Date: 03.02.2016
Topic:
PILOTS-01-2016:
Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties

SMEInst-02-2016-2017:
Accelerating the uptake of nanotechnologies, advanced materials or advanced manufacturing and processing technologies by SMEs

PILOTS-05-2017:
Paper-based electronics
Institution: CondAlign AS
Profile/Expertise: see attachment


ID: PO-16-DE-1660
Date: 03.02.2016
Topic:
FETOPEN-1-2016/2017:
FET-Open Research and Innovation Actions

FETPROACT-1-2016:
FET-Proactive: emerging themes and communities

NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation
Institution: Un iversity of Oldenburg / Division Microrobotics and Control Engineering
Profile/Expertise: see attachment


ID: PO-16-IT-1658
Date: 02.02.2016
Topic:
NMBP-13-2017:
Cross-cutting KETs for diagnostics at the point-of-care
Institution: CNR-ISASI
Profile/Expertise: see attachment


ID: PO-16-IT-1657
Date: 29.01.2016
Topic:
FETPROACT-1-2016:
FET-Proactive: emerging themes and communities
Institution: Democenter, Technopole Mirandola
Profile/Expertise: see attachment


ID: PO-16-IT-1656
Date: 29.01.2016
Topic:
FETPROACT-1-2016:
FET-Proactive: emerging themes and communities
Institution: Democenter, Technopole Mirandola
Profile/Expertise: see attachment


ID: PO-16-PL-1655
Date: 26.01.2016
Topic:
SPIRE-08-2017:
Carbon dioxide Utilisation to produce high added value chemicals
Institution: PROCHEM S.A.
Profile/Expertise: see attachment


ID: PO-16-SI-1654
Date: 21.01.2016
Topic:
NMBP-02-2016:
Advanced Materials for Power Electronics based on wide bandgap semiconductor devices technology

EEB-03-2016:
Integration of advanced technologies for heating and cooling at building and district level

EEB-06-2017:
Highly efficient hybrid storage solutions for power and heat in residential buildings and district areas, balancing the supply and demand conditions
Institution: HIDRIA d.o.o.
Profile/Expertise: see attachment


ID: PS-16-SI-1653
Date: 21.01.2016
Topic:
PILOTS-01-2016:
Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties

NMBP-21-2016:
ERA-NET on manufacturing technologies supporting industry and particularly SMEs in the global __br__competition

NMBP-24-2016:
Network to capitalise on strong European position in materials modelling and to allow industry to reap the benefits
Institution: HIDRIA d.o.o.
Profile/Expertise: see attachment


ID: PO-16-SI-1652
Date: 21.01.2016
Topic:
NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation

NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle

NMBP-23-2016:
Advancing the integration of Materials Modeling in Business Processes to enhance effective industrial decision making and increase competitiveness
Institution: HIDRIA d.o.o.
Profile/Expertise: see attachment


ID: PO-16-IT-1651
Date: 20.01.2016
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

EEB-05-2017:
Development of near zero energy building renovation

EEB-07-2017:
Integration of energy harvesting at building and district level
Institution: CNR-ICMATE and Department of Chemistry, Padova University
Profile/Expertise: see attachment


ID: PO-16-IT-1650
Date: 20.01.2016
Topic:
EEB-06-2017:
Highly efficient hybrid storage solutions for power and heat in residential buildings and district areas, balancing the supply and demand conditions
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-16-IT-1649
Date: 20.01.2016
Topic:
EEB-07-2017:
Integration of energy harvesting at building and district level
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-16-IT-1648
Date: 20.01.2016
Topic:
EEB-05-2017:
Development of near zero energy building renovation
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-16-IT-1647
Date: 20.01.2016
Topic:
BIOTEC-07-2017:
New Plant Breeding Techniques (NPBT) in molecular farming: Multipurpose crops for industrial bioproducts
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-16-IT-1645
Date: 20.01.2016
Topic:
SPIRE-08-2017:
Carbon dioxide Utilisation to produce high added value chemicals
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-16-IT-1644
Date: 20.01.2016
Topic:
SPIRE-07-2017:
Integrated approach to process optimisation for raw material resources efficiency, excluding recovery technologies of waste streams
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-16-IT-1643
Date: 20.01.2016
Topic:
FOF-10-2017:
New technologies and life cycle management for reconfigurable and reusable customised products
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-16-IT-1642
Date: 20.01.2016
Topic:
FOF-09-2017:
Novel design and predictive maintenance technologies for increased operating life of production systems
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-16-IT-1641
Date: 20.01.2016
Topic:
FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-16-FR-1639
Date: 18.01.2016
Topic:
FETOPEN-1-2016/2017:
FET-Open Research and Innovation Actions

FETOPEN-2-2016:
FET-Open Coordination and Support Actions

FETOPEN-3-2017:
FET-Open Coordination and Support Actions
Institution: LAGEP, University of Lyon 1
Profile/Expertise: see attachment


ID: PO-16-FR-1638
Date: 18.01.2016
Topic:
SPIRE-02-2016:
Plant-wide monitoring and control of data-intensive processes

SPIRE-03-2016:
Industrial technologies for the valorisation of European bio-resources into high added value process streams
Institution: LAGEP, University of Lyon 1
Profile/Expertise: see attachment


ID: PO-16-FR-1637
Date: 18.01.2016
Topic:
FOF-01-2016:
Novel hybrid approaches for additive and subtractive manufacturing machines

FOF-02-2016:
Machinery and robot systems in dynamic shop floor environments using novel embedded cognitive functions
Institution: LAGEP, University of Lyon 1
Profile/Expertise: see attachment


ID: PO-16-FR-1636
Date: 18.01.2016
Topic:
EEB-03-2016:
Integration of advanced technologies for heating and cooling at building and district level

EEB-06-2017:
Highly efficient hybrid storage solutions for power and heat in residential buildings and district areas, balancing the supply and demand conditions

EEB-07-2017:
Integration of energy harvesting at building and district level
Institution: LAGEP, University of Lyon 1
Profile/Expertise: see attachment


ID: PO-16-FR-1635
Date: 14.01.2016
Topic:
PILOTS-01-2016:
Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties

EEB-01-2016:
Highly efficient insulation materials with improved properties

NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures
Institution: Addev Matyerials
Profile/Expertise: see attachment


ID: PO-16-DK-1634
Date: 12.01.2016
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore
Institution: Danish technological institute (Center for Functional Coating)
Profile/Expertise: see attachment


ID: PO-16-US-1632
Date: 05.01.2016
Topic:
SMEInst-02-2016-2017:
Accelerating the uptake of nanotechnologies, advanced materials or advanced manufacturing and processing technologies by SMEs

PILOTS-02-2016:
Pilot Line Manufacturing of Nanostructured Antimicrobial Surfaces using Advanced Nanosurface Functionalization Technologies

FOF-05-2016:
Support for the further development of Additive Manufacturing technologies in Europe
Institution: EcoFaire Enterprises
Profile/Expertise: see attachment


ID: PO-15-FR-1631
Date: 29.12.2015
Topic:
PILOTS-02-2016:
Pilot Line Manufacturing of Nanostructured Antimicrobial Surfaces using Advanced Nanosurface Functionalization Technologies

BIOTEC-03-2016:
Microbial chassis platforms with optimized metabolic pathways for industrial innovations through systems biology

BIOTEC-04-2016:
KET Biotechnology foresight identifying gaps and high-value opportunities for the EU industry
Institution: elvesys
Profile/Expertise: see attachment


ID: PO-15-UA-1630
Date: 23.12.2015
Topic:
BIOTEC-02-2016:
Bioconversion of non-agricultural waste into biomolecules for industrial applications

BIOTEC-04-2016:
KET Biotechnology foresight identifying gaps and high-value opportunities for the EU industry

BIOTEC-08-2017:
Support for enhancing and demonstrating the impact of KET Biotechnology project
Institution: Sumy State University
Profile/Expertise: see attachment


ID: PO-15-IN-1629
Date: 22.12.2015
Topic:
FOF-07-2017:
Integration of unconventional technologies for multi-material processing into manufacturing systems

NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation
Institution: Indian Institute of Technology, Delhi
Profile/Expertise: see attachment


ID: PO-15-AT-1628
Date: 17.12.2015
Topic:
BIOTEC-07-2017:
New Plant Breeding Techniques (NPBT) in molecular farming: Multipurpose crops for industrial bioproducts
Institution: Vienna Biocenter Core Facilities, GmbH
Profile/Expertise: see attachment


ID: PO-15-AT-1627
Date: 17.12.2015
Topic:
BIOTEC-03-2016:
Microbial chassis platforms with optimized metabolic pathways for industrial innovations through systems biology
Institution: Vienna Biocenter Core Facilities, GmbH
Profile/Expertise: see attachment


ID: PO-15-IT-1625
Date: 14.12.2015
Topic:
SMEInst-02-2016-2017:
Accelerating the uptake of nanotechnologies, advanced materials or advanced manufacturing and processing technologies by SMEs

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production
Institution: PRAMAR Srl
Profile/Expertise: see attachment


ID: PS-15-ES-1624
Date: 11.12.2015
Topic:
EEB-04-2016:
New technologies and strategies for the development of pre-fabricated elements through the reuse and recycling of construction materials and structures
Institution: Technological Center of the Construction (CTCON)
Profile/Expertise: see attachment


ID: PO-15-DE-1623
Date: 08.12.2015
Topic:
FTI:
Fast Track to Innovation - Pilot

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods
Institution: Indmatec
Profile/Expertise: see attachment


ID: PO-15-BE-1622
Date: 03.12.2015
Topic:
FOF-03-2016:
Zero defect strategies at system level for multi-stage manufacturing in production lines

FOF-13-2017:
Photonics Laser-based production
Institution: Nikon Metrology
Profile/Expertise: see attachment


ID: PO-15-TR-1621
Date: 02.12.2015
Topic:
EEB-05-2017:
Development of near zero energy building renovation

NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation

NMBP-28-2017:
Framework and strategies for nanomaterial characterisation, classification, grouping and read-across for risk analysis
Institution: Izmir Institute of Technology
Profile/Expertise: see attachment


ID: PO-15-JP-1620
Date: 01.12.2015
Topic:
NMBP-02-2016:
Advanced Materials for Power Electronics based on wide bandgap semiconductor devices technology
Institution: EU-Japan Centre for Industrial Cooperation
Profile/Expertise: see attachment


ID: PO-15-AT-1619
Date: 01.12.2015
Topic:
NMBP-10-2016:
Nanoformulation of biologicals
Institution: Vienna Biocenter Core Facilities, GmbH
Profile/Expertise: see attachment


ID: PO-15-AT-1618
Date: 01.12.2015
Topic:
NMBP-09-2016:
Biomaterials for diagnosis and treatment of multiple sclerosis
Institution: Vienna Biocenter Core Facilities, GmbH
Profile/Expertise: see attachment


ID: PO-15-PT-1617
Date: 27.11.2015
Topic:
NMBP-01-2016:
Novel hybrid materials for heterogeneous catalysis

NMBP-17-2016:
Advanced materials solutions and architectures for high efficiency solar energy harvesting
Institution: Centre of Physics - University of Minho (CFUM)
Profile/Expertise: see attachment


ID: PO-15-PT-1616
Date: 27.11.2015
Topic:
NMBP-09-2016:
Biomaterials for diagnosis and treatment of multiple sclerosis

NMBP-10-2016:
Nanoformulation of biologicals

NMBP-15-2017:
Nanotechnologies for imaging cellular transplants and regenerative processes in vivo
Institution: University of Minho - Centre of Physics (CFUM)
Profile/Expertise: see attachment


ID: PO-15-GR-1615
Date: 26.11.2015
Topic:
NMBP-09-2016:
Biomaterials for diagnosis and treatment of multiple sclerosis

NMBP-10-2016:
Nanoformulation of biologicals

NMBP-12-2017:
Development of a reliable methodology for better risk management of engineered Biomaterials in Advanced Therapy Medicinal Products and/or Medical Devices
Institution: UNIVERSITY OF PATRAS-PHARMACY & FORTH/ICE-HT
Profile/Expertise: see attachment


ID: PS-15-ES-1614
Date: 25.11.2015
Topic:
FOF-01-2016:
Novel hybrid approaches for additive and subtractive manufacturing machines
Institution: AITIIP Centro Tecnológico
Profile/Expertise: see attachment


ID: PO-15-SI-1611
Date: 24.11.2015
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation

NMBP-24-2016:
Network to capitalise on strong European position in materials modelling and to allow industry to reap the benefits
Institution: Jozef Stefan Institute
Profile/Expertise: see attachment


ID: PO-15-ES-1610
Date: 24.11.2015
Topic:
BIOTEC-02-2016:
Bioconversion of non-agricultural waste into biomolecules for industrial applications
Institution: CSIC
Profile/Expertise: see attachment


ID: PO-15-ES-1607
Date: 19.11.2015
Topic:
PILOTS-02-2016:
Pilot Line Manufacturing of Nanostructured Antimicrobial Surfaces using Advanced Nanosurface Functionalization Technologies

PILOTS-04-2017:
Pilot Lines for 3D printed and/or injection moulded polymeric or ceramic microfluidic MEMS

FOF-05-2016:
Support for the further development of Additive Manufacturing technologies in Europe
Institution: Institute of Polymer Science and Technology
Profile/Expertise: see attachment


ID: PO-15-ES-1606
Date: 13.11.2015
Topic:
SPIRE-01-2016:
Systematic approaches for resource-efficient water management systems in process industries

PILOTS-03-2017:
Pilot Lines for Manufacturing of Nanotextured surfaces with enhanced mechanical properties

SPIRE-04-2016:
Industrial furnace design addressing energy efficiency in new and existing furnaces
Institution: AZULEV S.A.
Profile/Expertise: see attachment


ID: PO-15-ES-1605
Date: 13.11.2015
Topic:
EEB-04-2016:
New technologies and strategies for the development of pre-fabricated elements through the reuse and recycling of construction materials and structures

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production
Institution: AZULEV S.A.
Profile/Expertise: see attachment


ID: PS-15-ES-1604
Date: 12.11.2015
Topic:
NMBP-02-2016:
Advanced Materials for Power Electronics based on wide bandgap semiconductor devices technology
Institution: Andaltec R&D
Profile/Expertise: see attachment


ID: PO-15-IL-1603
Date: 12.11.2015
Topic:
PILOTS-01-2016:
Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties
Institution: Tortech nano fibers
Profile/Expertise: see attachment


ID: PO-15-ES-1602
Date: 12.11.2015
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore

FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production
Institution: Avanzare Innovacion Tecnologica SL
Profile/Expertise: see attachment


ID: PO-15-FR-1601
Date: 10.11.2015
Topic:
NMBP-33-2016:
Networking and sharing best experiences in using regional Clusters strategies with a focus on supporting innovation in the NMBP thematic area
Institution: Matikem
Profile/Expertise: see attachment


ID: PO-15-ES-1600
Date: 09.11.2015
Topic:
NMBP-17-2016:
Advanced materials solutions and architectures for high efficiency solar energy harvesting
Institution: Ayesa
Profile/Expertise: see attachment


ID: PO-15-ES-1599
Date: 09.11.2015
Topic:
NMBP-09-2016:
Biomaterials for diagnosis and treatment of multiple sclerosis
Institution: Achucarro Basque Center for Neuroscience
Profile/Expertise: see attachment


ID: PO-15-FR-1597
Date: 06.11.2015
Topic:
NMBP-23-2016:
Advancing the integration of Materials Modeling in Business Processes to enhance effective industrial decision making and increase competitiveness

NMBP-24-2016:
Network to capitalise on strong European position in materials modelling and to allow industry to reap the benefits

NMBP-25-2017:
Next generation system integrating tangible and intangible materials model components to support innovation in industry
Institution: INRIA
Profile/Expertise: see attachment


ID: PO-15-CH-1596
Date: 05.11.2015
Topic:
NMBP-10-2016:
Nanoformulation of biologicals

NMBP-15-2017:
Nanotechnologies for imaging cellular transplants and regenerative processes in vivo
Institution: AnaPath
Profile/Expertise: see attachment


ID: PO-15-ES-1595
Date: 05.11.2015
Topic:
SPIRE-01-2016:
Systematic approaches for resource-efficient water management systems in process industries

SPIRE-03-2016:
Industrial technologies for the valorisation of European bio-resources into high added value process streams

SPIRE-08-2017:
Carbon dioxide Utilisation to produce high added value chemicals
Institution: EKOTEK
Profile/Expertise: see attachment


ID: PO-15-ES-1594
Date: 05.11.2015
Topic:
FOF-10-2017:
New technologies and life cycle management for reconfigurable and reusable customised products
Institution: EKOTEK
Profile/Expertise: see attachment


ID: PO-15-ES-1593
Date: 05.11.2015
Topic:
NMBP-02-2016:
Advanced Materials for Power Electronics based on wide bandgap semiconductor devices technology

NMBP-03-2016:
Innovative and sustainable materials solutions for the substitution of critical raw materials in the electric power system

NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle
Institution: EKOTEK
Profile/Expertise: see attachment


ID: PO-15-ES-1592
Date: 05.11.2015
Topic:
EEB-02-2016:
Performance indicators and monitoring techniques for energy-efficiency and environmental quality at building and district level
Institution: EKOTEK
Profile/Expertise: see attachment


ID: PS-15-DE-1591
Date: 04.11.2015
Topic:
FOF-01-2016:
Novel hybrid approaches for additive and subtractive manufacturing machines

EEB-01-2016:
Highly efficient insulation materials with improved properties

FOF-05-2016:
Support for the further development of Additive Manufacturing technologies in Europe
Institution: INDMATEC GmbH
Profile/Expertise: see attachment


ID: PO-15-LU-1589
Date: 30.10.2015
Topic:
BIOTEC-02-2016:
Bioconversion of non-agricultural waste into biomolecules for industrial applications

BIOTEC-04-2016:
KET Biotechnology foresight identifying gaps and high-value opportunities for the EU industry
Institution: INNOmaterials
Profile/Expertise: see attachment


ID: PO-15-LU-1588
Date: 30.10.2015
Topic:
BIOTEC-02-2016:
Bioconversion of non-agricultural waste into biomolecules for industrial applications
Institution: INNOmaterials
Profile/Expertise: see attachment


ID: PO-15-DE-1587
Date: 30.10.2015
Topic:
SPIRE-03-2016:
Industrial technologies for the valorisation of European bio-resources into high added value process streams
Institution: Fraunhofer-Institute for Applied Polymer Research
Profile/Expertise: see attachment


ID: PO-15-DE-1586
Date: 30.10.2015
Topic:
BIOTEC-02-2016:
Bioconversion of non-agricultural waste into biomolecules for industrial applications
Institution: Fraunhofer-Institute for Applied Polymer Research
Profile/Expertise: see attachment


ID: PO-15-FR-1585
Date: 28.10.2015
Topic:
NMBP-01-2016:
Novel hybrid materials for heterogeneous catalysis

BIOTEC-02-2016:
Bioconversion of non-agricultural waste into biomolecules for industrial applications

BIOTEC-05-2017:
Microbial platforms for CO2-reuse processes in the low-carbon economy
Institution: CNRS/University of Lille/UCCS
Profile/Expertise: see attachment


ID: PO-15-IT-1584
Date: 28.10.2015
Topic:
NMBP-03-2016:
Innovative and sustainable materials solutions for the substitution of critical raw materials in the electric power system
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-TR-1583
Date: 28.10.2015
Topic:
NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation

NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle

NMBP-24-2016:
Network to capitalise on strong European position in materials modelling and to allow industry to reap the benefits
Institution: Bogazici University
Profile/Expertise: see attachment


ID: PO-15-IT-1582
Date: 27.10.2015
Topic:
SPIRE-03-2016:
Industrial technologies for the valorisation of European bio-resources into high added value process streams
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1581
Date: 27.10.2015
Topic:
FOF-08-2017:
In-line measurement and control for micro-/nano-enabled high-volume manufacturing for enhanced reliability
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1580
Date: 27.10.2015
Topic:
FOF-07-2017:
Integration of unconventional technologies for multi-material processing into manufacturing systems
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-TR-1579
Date: 27.10.2015
Topic:
NMBP-01-2016:
Novel hybrid materials for heterogeneous catalysis

FETOPEN-1-2016/2017:
FET-Open Research and Innovation Actions

NMBP-02-2016:
Advanced Materials for Power Electronics based on wide bandgap semiconductor devices technology
Institution: Celal Bayar University
Profile/Expertise: see attachment


ID: PO-15-IT-1578
Date: 27.10.2015
Topic:
FOF-01-2016:
Novel hybrid approaches for additive and subtractive manufacturing machines
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1577
Date: 27.10.2015
Topic:
PILOTS-04-2017:
Pilot Lines for 3D printed and/or injection moulded polymeric or ceramic microfluidic MEMS
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1576
Date: 27.10.2015
Topic:
PILOTS-03-2017:
Pilot Lines for Manufacturing of Nanotextured surfaces with enhanced mechanical properties
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1575
Date: 27.10.2015
Topic:
PILOTS-02-2016:
Pilot Line Manufacturing of Nanostructured Antimicrobial Surfaces using Advanced Nanosurface Functionalization Technologies
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1574
Date: 27.10.2015
Topic:
PILOTS-01-2016:
Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1573
Date: 27.10.2015
Topic:
NMBP-25-2017:
Next generation system integrating tangible and intangible materials model components to support innovation in industry
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1572
Date: 27.10.2015
Topic:
NMBP-23-2016:
Advancing the integration of Materials Modeling in Business Processes to enhance effective industrial decision making and increase competitiveness
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1571
Date: 27.10.2015
Topic:
BIOTEC-06-2017:
Optimisation of biocatalysis and downstream processing for the sustainable production of high added-value platform chemicals
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1570
Date: 27.10.2015
Topic:
BIOTEC-05-2017:
Microbial platforms for CO2-reuse processes in the low-carbon economy
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1569
Date: 27.10.2015
Topic:
BIOTEC-02-2016:
Bioconversion of non-agricultural waste into biomolecules for industrial applications
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1568
Date: 27.10.2015
Topic:
NMBP-25-2017:
Next generation system integrating tangible and intangible materials model components to support innovation in industry
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1567
Date: 27.10.2015
Topic:
NMBP-23-2016:
Advancing the integration of Materials Modeling in Business Processes to enhance effective industrial decision making and increase competitiveness
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1565
Date: 27.10.2015
Topic:
NMBP-22-2017:
Business models and industrial strategies supporting novel supply chains for innovative product-services
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1564
Date: 27.10.2015
Topic:
NMBP-20-2017:
High-performance materials for optimizing CO2 capture
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1563
Date: 27.10.2015
Topic:
NMBP-19-2017:
Cost-effective materials for \"power-to-chemical\" technologies
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1562
Date: 27.10.2015
Topic:
NMBP-18-2016:
Advanced materials enabling the integration of storage technologies in the electricity grid
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1561
Date: 27.10.2015
Topic:
NMBP-17-2016:
Advanced materials solutions and architectures for high efficiency solar energy harvesting
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1560
Date: 27.10.2015
Topic:
NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1559
Date: 27.10.2015
Topic:
NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1558
Date: 27.10.2015
Topic:
NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1557
Date: 27.10.2015
Topic:
NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1556
Date: 27.10.2015
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-IT-1555
Date: 27.10.2015
Topic:
NMBP-02-2016:
Advanced Materials for Power Electronics based on wide bandgap semiconductor devices technology
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-15-ES-1554
Date: 27.10.2015
Topic:
NMBP-27-2016:
Promoting safe innovation through global consolidation and networking of nanosafety centres and strengthening the European industry through cooperation in nanosafety

NMBP-28-2017:
Framework and strategies for nanomaterial characterisation, classification, grouping and read-across for risk analysis
Institution: EKOTEK
Profile/Expertise: see attachment


ID: PO-15-ES-1553
Date: 26.10.2015
Topic:
PILOTS-01-2016:
Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties

NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle

NMBP-17-2016:
Advanced materials solutions and architectures for high efficiency solar energy harvesting
Institution: Gnanomat
Profile/Expertise: see attachment


ID: PO-15-ES-1552
Date: 26.10.2015
Topic:
NMBP-01-2016:
Novel hybrid materials for heterogeneous catalysis
Institution: IMDEA Nanociencia
Profile/Expertise: see attachment


ID: PO-15-FR-1551
Date: 26.10.2015
Topic:
PILOTS-04-2017:
Pilot Lines for 3D printed and/or injection moulded polymeric or ceramic microfluidic MEMS

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production
Institution: S2P- Smart Plastic Products
Profile/Expertise: see attachment


ID: PO-15-BE-1550
Date: 23.10.2015
Topic:
FOF-01-2016:
Novel hybrid approaches for additive and subtractive manufacturing machines
Institution: Laser Cladding Venture nv
Profile/Expertise: see attachment


ID: PO-15-SI-1549
Date: 23.10.2015
Topic:
NMBP-03-2016:
Innovative and sustainable materials solutions for the substitution of critical raw materials in the electric power system

NMBP-06-2017:
Improved material durability in buildings and infrastructures, including offshore

NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle
Institution: University of Ljubljana - Faculty of Natural Sciences and Engineering
Profile/Expertise: see attachment


ID: PO-15-ES-1548
Date: 22.10.2015
Topic:
PILOTS-02-2016:
Pilot Line Manufacturing of Nanostructured Antimicrobial Surfaces using Advanced Nanosurface Functionalization Technologies

PILOTS-03-2017:
Pilot Lines for Manufacturing of Nanotextured surfaces with enhanced mechanical properties

FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production
Institution: IMDEA-Nanoscience
Profile/Expertise: see attachment


ID: PO-15-BE-1547
Date: 22.10.2015
Topic:
FOF-01-2016:
Novel hybrid approaches for additive and subtractive manufacturing machines

FOF-03-2016:
Zero defect strategies at system level for multi-stage manufacturing in production lines

FOF-13-2017:
Photonics Laser-based production
Institution: Materialise N.V.
Profile/Expertise: see attachment


ID: PO-15-ES-1545
Date: 20.10.2015
Topic:
FOF-03-2016:
Zero defect strategies at system level for multi-stage manufacturing in production lines

FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production

FOF-07-2017:
Integration of unconventional technologies for multi-material processing into manufacturing systems
Institution: INDUSTRIAS ALEGRE S.A.
Profile/Expertise: see attachment


ID: PO-15-ES-1544
Date: 20.10.2015
Topic:
PILOTS-03-2017:
Pilot Lines for Manufacturing of Nanotextured surfaces with enhanced mechanical properties

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle
Institution: INDUSTRIAS ALEGRE S.A.
Profile/Expertise: see attachment


ID: PO-15-UA-1543
Date: 20.10.2015
Topic:
NMBP-12-2017:
Development of a reliable methodology for better risk management of engineered Biomaterials in Advanced Therapy Medicinal Products and/or Medical Devices
Institution: National Cancer Institute
Profile/Expertise: see attachment


ID: PO-15-PT-1542
Date: 19.10.2015
Topic:
NMBP-28-2017:
Framework and strategies for nanomaterial characterisation, classification, grouping and read-across for risk analysis

NMBP-29-2017:
Advanced and realistic models and assays for nanomaterial hazard assessment
Institution: University of Aveiro
Profile/Expertise: see attachment


ID: PO-15-DE-1539
Date: 16.10.2015
Topic:
EEB-01-2016:
Highly efficient insulation materials with improved properties

EEB-04-2016:
New technologies and strategies for the development of pre-fabricated elements through the reuse and recycling of construction materials and structures

EEB-05-2017:
Development of near zero energy building renovation
Institution: Federal Institute for Materials Research and Testing (BAM)
Profile/Expertise: see attachment


ID: PO-15-UA-1537
Date: 08.10.2015
Topic:
NMBP-01-2016:
Novel hybrid materials for heterogeneous catalysis

NMBP-10-2016:
Nanoformulation of biologicals

NMBP-12-2017:
Development of a reliable methodology for better risk management of engineered Biomaterials in Advanced Therapy Medicinal Products and/or Medical Devices
Institution: Paton Electric Welding Institute
Profile/Expertise: see attachment


ID: PO-15-ES-1536
Date: 06.10.2015
Topic:
NMBP-35-2017:
Innovative solutions for the conservation of 20th century cultural heritage
Institution: AIDIMME
Profile/Expertise: see attachment


ID: PO-15-ES-1535
Date: 06.10.2015
Topic:
PILOTS-02-2016:
Pilot Line Manufacturing of Nanostructured Antimicrobial Surfaces using Advanced Nanosurface Functionalization Technologies

PILOTS-03-2017:
Pilot Lines for Manufacturing of Nanotextured surfaces with enhanced mechanical properties

FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production
Institution: AIDIMME
Profile/Expertise: see attachment


ID: PO-15-ES-1534
Date: 06.10.2015
Topic:
EEB-01-2016:
Highly efficient insulation materials with improved properties

NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods
Institution: AIDIMME
Profile/Expertise: see attachment


ID: PO-15-IT-1533
Date: 06.10.2015
Topic:
PILOTS-01-2016:
Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties

NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods
Institution: University of Modena and Reggio Emilia
Profile/Expertise: see attachment


ID: PO-15-ES-1532
Date: 05.10.2015
Topic:
BIOTEC-02-2016:
Bioconversion of non-agricultural waste into biomolecules for industrial applications
Institution: CIAL (UAM-CSIC)
Profile/Expertise: see attachment


ID: PO-15-ES-1531
Date: 02.10.2015
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation

NMBP-25-2017:
Next generation system integrating tangible and intangible materials model components to support innovation in industry
Institution: IK4-IDEKO
Profile/Expertise: see attachment


ID: PO-15-IT-1530
Date: 02.10.2015
Topic:
SPIRE-02-2016:
Plant-wide monitoring and control of data-intensive processes

FOF-03-2016:
Zero defect strategies at system level for multi-stage manufacturing in production lines

FOF-09-2017:
Novel design and predictive maintenance technologies for increased operating life of production systems
Institution: Brovedani spa
Profile/Expertise: see attachment


ID: PO-15-FR-1529
Date: 02.10.2015
Topic:
PILOTS-01-2016:
Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties

FOF-05-2016:
Support for the further development of Additive Manufacturing technologies in Europe

NMBP-17-2016:
Advanced materials solutions and architectures for high efficiency solar energy harvesting
Institution: Genes‘Ink
Profile/Expertise: see attachment


ID: PS-15-FR-1528
Date: 02.10.2015
Topic:
PILOTS-01-2016:
Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties

PILOTS-05-2017:
Paper-based electronics
Institution: Genes‘Ink
Profile/Expertise: see attachment


ID: PO-15-ES-1526
Date: 01.10.2015
Topic:
NMBP-32-2016:
Support for National Contact Points
Institution: CEIT and TECNUN
Profile/Expertise: see attachment


ID: PO-15-ES-1525
Date: 01.10.2015
Topic:
NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle
Institution: CEIT and TECNUN
Profile/Expertise: see attachment


ID: PO-15-ES-1524
Date: 01.10.2015
Topic:
NMBP-23-2016:
Advancing the integration of Materials Modeling in Business Processes to enhance effective industrial decision making and increase competitiveness

NMBP-24-2016:
Network to capitalise on strong European position in materials modelling and to allow industry to reap the benefits
Institution: CEIT and TECNUN
Profile/Expertise: see attachment


ID: PO-15-ES-1523
Date: 01.10.2015
Topic:
PILOTS-01-2016:
Pilot lines for manufacturing of materials with customized thermal/electrical conductivity properties

PILOTS-03-2017:
Pilot Lines for Manufacturing of Nanotextured surfaces with enhanced mechanical properties
Institution: Faurecia Interior Systems SALC
Profile/Expertise: see attachment


ID: PO-15-ES-1522
Date: 01.10.2015
Topic:
FOF-03-2016:
Zero defect strategies at system level for multi-stage manufacturing in production lines

FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production

FOF-07-2017:
Integration of unconventional technologies for multi-material processing into manufacturing systems
Institution: Faurecia Interior Systems SALC
Profile/Expertise: see attachment


ID: PO-15-ES-1521
Date: 01.10.2015
Topic:
NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle

BIOTEC-02-2016:
Bioconversion of non-agricultural waste into biomolecules for industrial applications
Institution: Faurecia Interior Systems SALC
Profile/Expertise: see attachment


ID: PO-15-ES-1520
Date: 01.10.2015
Topic:
FOF-06-2017:
New product functionalities through advanced surface manufacturing processes for mass production
Institution: CEIT and TECNUN
Profile/Expertise: see attachment


ID: PO-15-ES-1519
Date: 30.09.2015
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods

NMBP-10-2016:
Nanoformulation of biologicals
Institution: SPB
Profile/Expertise: see attachment


ID: PO-15-SI-1518
Date: 29.09.2015
Topic:
FOF-02-2016:
Machinery and robot systems in dynamic shop floor environments using novel embedded cognitive functions

FOF-03-2016:
Zero defect strategies at system level for multi-stage manufacturing in production lines

FOF-11-2016:
Digital automation
Institution: TCS-Toolmakers Cluster of Slovenia
Profile/Expertise: see attachment


ID: PO-15-SI-1517
Date: 29.09.2015
Topic:
FOF-02-2016:
Machinery and robot systems in dynamic shop floor environments using novel embedded cognitive functions

FOF-03-2016:
Zero defect strategies at system level for multi-stage manufacturing in production lines

FOF-04-2016:
Continuous adaptation of work environments with changing levels of automation in evolving production systems
Institution: TCS-Toolmakers Cluster of Slovenia
Profile/Expertise: see attachment


ID: PO-15-SI-1516
Date: 29.09.2015
Topic:
FOF-03-2016:
Zero defect strategies at system level for multi-stage manufacturing in production lines

FOF-04-2016:
Continuous adaptation of work environments with changing levels of automation in evolving production systems

FOF-11-2016:
Digital automation
Institution: TCS-Toolmakers Cluster of Slovenia
Profile/Expertise: see attachment


ID: PO-15-SI-1515
Date: 29.09.2015
Topic:
FOF-01-2016:
Novel hybrid approaches for additive and subtractive manufacturing machines

FOF-04-2016:
Continuous adaptation of work environments with changing levels of automation in evolving production systems

FOF-05-2016:
Support for the further development of Additive Manufacturing technologies in Europe
Institution: TCS-Toolmakers Cluster of Slovenia
Profile/Expertise: see attachment


ID: PO-15-SI-1514
Date: 29.09.2015
Topic:
FOF-01-2016:
Novel hybrid approaches for additive and subtractive manufacturing machines

FOF-02-2016:
Machinery and robot systems in dynamic shop floor environments using novel embedded cognitive functions

FOF-11-2016:
Digital automation
Institution: TCS-Toolmakers Cluster of Slovenia
Profile/Expertise: see attachment


ID: PO-15-ES-1513
Date: 28.09.2015
Topic:
NMBP-01-2016:
Novel hybrid materials for heterogeneous catalysis

NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle

NMBP-17-2016:
Advanced materials solutions and architectures for high efficiency solar energy harvesting
Institution: Universidad Complutense de Madrid
Profile/Expertise: see attachment


ID: PS-15-ES-1512
Date: 24.09.2015
Topic:
NMBP-01-2016:
Novel hybrid materials for heterogeneous catalysis

NMBP-10-2016:
Nanoformulation of biologicals

NMBP-15-2017:
Nanotechnologies for imaging cellular transplants and regenerative processes in vivo
Institution: Universidad Rey Juan Carlos
Profile/Expertise: see attachment


ID: PO-15-FR-1511
Date: 23.09.2015
Topic:
NMBP-01-2016:
Novel hybrid materials for heterogeneous catalysis

NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-20-2017:
High-performance materials for optimizing CO2 capture
Institution: University of Lille
Profile/Expertise: see attachment


ID: PO-15-ES-1510
Date: 23.09.2015
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-07-2017:
Systems of materials characterisation for model, product and process optimisation
Institution: GOLDEMAR SOLUTIONS
Profile/Expertise: see attachment


ID: PO-15-ES-1509
Date: 23.09.2015
Topic:
NMBP-01-2016:
Novel hybrid materials for heterogeneous catalysis
Institution: GOLDEMAR SOLUTIONS
Profile/Expertise: see attachment


ID: PO-15-FR-1505
Date: 22.09.2015
Topic:
NMBP-08-2016:
Affordable weight reduction of high-volume vehicles and components taking into account the entire life-cycle
Institution: Laboratoire National de métrologie et d‘Essais
Profile/Expertise: see attachment


ID: PO-15-FR-1504
Date: 22.09.2015
Topic:
NMBP-01-2016:
Novel hybrid materials for heterogeneous catalysis
Institution: Laboratoire National de métrologie et d‘Essais
Profile/Expertise: see attachment


ID: PO-15-FR-1503
Date: 22.09.2015
Topic:
EEB-04-2016:
New technologies and strategies for the development of pre-fabricated elements through the reuse and recycling of construction materials and structures
Institution: Laboratoire National de métrologie et d‘Essais
Profile/Expertise: see attachment


ID: PO-15-FR-1502
Date: 22.09.2015
Topic:
EEB-02-2016:
Performance indicators and monitoring techniques for energy-efficiency and environmental quality at building and district level
Institution: Laboratoire National de métrologie et d‘Essais
Profile/Expertise: see attachment


ID: PS-15-FR-1501
Date: 22.09.2015
Topic:
EEB-01-2016:
Highly efficient insulation materials with improved properties
Institution: Laboratoire National de métrologie et d‘Essais
Profile/Expertise: see attachment


ID: PO-15-DE-1499
Date: 22.09.2015
Topic:
NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods
Institution: Fraunhofer IAP
Profile/Expertise: see attachment


ID: PO-15-DE-1498
Date: 13.09.2015
Topic:
NMBP-01-2016:
Novel hybrid materials for heterogeneous catalysis

NMBP-02-2016:
Advanced Materials for Power Electronics based on wide bandgap semiconductor devices technology

NMBP-03-2016:
Innovative and sustainable materials solutions for the substitution of critical raw materials in the electric power system
Institution: TU Ilmenau - Institute for Materials Engineering and Institute of Micro- and Nanotechnologies MacroNano(R)
Profile/Expertise: see attachment


ID: PO-15-IL-1497
Date: 01.09.2015
Topic:
FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials

MANUNET 5 - 2015:
New manufacturing methods, components and systems (development of demonstrators, devices and equipments, logistic systems, etc.).

MANUNET 6 - 2015:
Other technologies/products related to the manufacturing field.
Institution: SCD Semiconductor Devices
Profile/Expertise: see attachment


ID: PO-15-PL-1494
Date: 20.08.2015
Topic:
FoF 5 - 2014:
Innovative product-service design using manufacturing intelligence

FoF 13 - 2015:
Re-use and re-manufacturing technologies and equipment for sustainable product life cycle management

FoF 10 - 2015:
Manufacturing of custom made parts for personalised products
Institution: Cracow University of Technology
Profile/Expertise: see attachment


ID: PO-15-PL-1492
Date: 19.08.2015
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs

NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: Cracow University of Technology
Profile/Expertise: see attachment


ID: PS-15-UA-1490
Date: 29.07.2015
Topic:
M-ERA.NET 2 - 2014:
New Surfaces and Coatings
Institution: Karpenko Physico-Mechanical Institute of NAS of Ukraine
Profile/Expertise: see attachment


ID: PO-15-FR-1486
Date: 15.07.2015
Topic:
FoF 2 - 2014:
Manufacturing processes for complex structures and geometries with efficient use of material

FoF 9 - 2015:
ICT Innovation for Manufacturing SMEs (I4MS)

FoF 10 - 2015:
Manufacturing of custom made parts for personalised products
Institution: GMP Industrie
Profile/Expertise: see attachment


ID: PO-15-IT-1485
Date: 29.06.2015
Topic:
FETOPEN 3 - 2015:
Coordination and Support Activities 2015

FTI - 2015:
Fast track to Innovation - Pilot

IP 2015:
Inducement prize for design-driven innovative material solutions to reduce particulate matter air pollution in urban areas
Institution: Dept. Industrial Engineering, University of Parma
Profile/Expertise: see attachment


ID: PO-15-BR-1482
Date: 03.06.2015
Topic:
M-ERA.NET 5 - 2015:
Tailoring of Bioactive Material Surfaces for Health Applications
Institution: Piaram
Profile/Expertise: see attachment


ID: PO-15-IT-1481
Date: 03.06.2015
Topic:
NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

NMP 17 - 2014:
Post-lithium ion batteries for electric automotive applications

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: Department of Physical Sciences, Earth and Environment, University of Siena
Profile/Expertise: see attachment


ID: PS-15-BR-1480
Date: 03.06.2015
Topic:
M-ERA.NET 5 - 2015:
Tailoring of Bioactive Material Surfaces for Health Applications
Institution: Piaram
Profile/Expertise: see attachment


ID: PO-15-NL-1477
Date: 27.05.2015
Topic:
NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs

MANUNET 1 - 2015:
Knowledge-based engineering, information and communication technologies for manufacturing (industrial robotics, computer-aided engineering and design, automated manufacturing, product lifetime management, etc.)

MANUNET 3 - 2015:
Adaptive manufacturing technologies including processes for removing, joining, adding, forming, consolidating, assembling.
Institution: BuBclean
Profile/Expertise: see attachment


ID: PO-15-SI-1473
Date: 11.05.2015
Topic:
NMP 14 - 2015:
ERA-NET on Materials for Energy

NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

M-ERA.NET 1 - 2015:
Integrated Computational Materials Engineering
Institution: Jo¸ef Stefan Institute
Profile/Expertise: see attachment


ID: PO-15-SI-1472
Date: 11.05.2015
Topic:
EeB 1 - 2014:
Materials for building envelope

M-ERA.NET 4 - 2015:
Materials for Sustainable and Affordable Low Carbon Energy Technologies

M-ERA.NET 6 - 2015:
Materials for Additive Manufacturing
Institution: Jozef Stefan Institute
Profile/Expertise: see attachment


ID: PO-15-SI-1469
Date: 29.04.2015
Topic:
EeB 1 - 2014:
Materials for building envelope

M-ERA.NET 4 - 2015:
Materials for Sustainable and Affordable Low Carbon Energy Technologies

M-ERA.NET 6 - 2015:
Materials for Additive Manufacturing
Institution: Jozef Stefan Institute, Advanced Materials Department
Profile/Expertise: see attachment


ID: PO-15-BR-1468
Date: 24.04.2015
Topic:
M-ERA.NET 2 - 2015:
New Surfaces and Coatings

M-ERA.NET 3 - 2015:
High performance Synthetic and Biobased Composites

M-ERA.NET 5 - 2015:
Tailoring of Bioactive Material Surfaces for Health Applications
Institution: State University of São Paulo
Profile/Expertise: see attachment


ID: PS-15-FR-1467
Date: 20.04.2015
Topic:
NMP 21 - 2014:
Materials-based solutions for the protection or preservation of European cultural heritage

M-ERA.NET 2 - 2015:
New Surfaces and Coatings

M-ERA.NET 3 - 2015:
High performance Synthetic and Biobased Composites
Institution: University of Bordeaux
Profile/Expertise: see attachment


ID: PO-15-SI-1464
Date: 16.04.2015
Topic:
M-ERA.NET 3 - 2015:
High performance Synthetic and Biobased Composites

M-ERA.NET 5 - 2015:
Tailoring of Bioactive Material Surfaces for Health Applications
Institution: Jo¸ef Stefan Institute, Advanced Materials Department
Profile/Expertise: see attachment


ID: PO-15-FR-1463
Date: 16.04.2015
Topic:
NMP 20 - 2014:
Widening materials models

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Lab. SPMS, Ecole CentraleSupelec
Profile/Expertise: see attachment


ID: PO-15-FR-1460
Date: 07.04.2015
Topic:
NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

NMP 3 - 2015:
Manufacturing and control of nanoporous materials

NMP 40 - 2015:
Support for clustering and networking in the micro- & nanofluidics community
Institution: Université de Pau et des Pays de l‘Adour
Profile/Expertise: see attachment


ID: PO-15-IT-1459
Date: 01.04.2015
Topic:
NMP 12 - 2015:
Biomaterials for treatment and prevention of Alzheimer’s disease

NMP 14 - 2015:
ERA-NET on Materials for Energy

M-ERA.NET 5 - 2014:
Materials for Health
Institution: University of Padova
Profile/Expertise: see attachment


ID: PO-15-PL-1458
Date: 26.03.2015
Topic:
M-ERA.NET 2 - 2015:
New Surfaces and Coatings
Institution: Industrial Chemistry Research Institute
Profile/Expertise: see attachment


ID: PO-15-IE-1457
Date: 20.03.2015
Topic:
NMP 15 - 2015:
Materials innovations for the optimisation of cooling in power plants

NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: National University of Ireland Galway
Profile/Expertise: see attachment


ID: PO-15-FR-1456
Date: 19.03.2015
Topic:
NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

NMP 18 - 2014:
Materials solutions for use in the creative industry sector

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Lab. SPMS, Ecole CentraleSupelec
Profile/Expertise: see attachment


ID: PO-15-IT-1455
Date: 17.03.2015
Topic:
NMP 14 - 2015:
ERA-NET on Materials for Energy

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: CNR National Resrearch Council of Italy
Profile/Expertise: see attachment


ID: PS-15-GR-1454
Date: 16.03.2015
Topic:
NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: National Center for Scientific Research "Demokritos"
Profile/Expertise: see attachment


ID: PS-15-PL-1450
Date: 13.03.2015
Topic:
FETOPEN 1 - 2014/2015:
FET-Open research projects

BIOTEC 5 - 2015:
SME-boosting biotechnology-based industrial processes driving competitiveness and sustainability
Institution: Lodz Regional Science and Technology Park Ltd.
Profile/Expertise: see attachment


ID: PO-15-ES-1444
Date: 04.03.2015
Topic:
FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials

SPIRE 5 - 2015:
New adaptable catalytic reactor methodologies for Process Intensification

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: ITACA, Universitat Politecnica de Valencia
Profile/Expertise: see attachment


ID: PO-15-NL-1443
Date: 04.03.2015
Topic:
FTI - 2015:
Fast track to Innovation - Pilot
Institution: KNN Bioplastic
Profile/Expertise: see attachment


ID: PS-15-NL-1442
Date: 04.03.2015
Topic:
FTI - 2015:
Fast track to Innovation - Pilot
Institution: KNN Bioplastic
Profile/Expertise: see attachment


ID: PO-15-IT-1437
Date: 02.03.2015
Topic:
NMP 7 - 2015:
Additive manufacturing for tabletop nanofactories
Institution: Protech s.a.s. di Girardi A. & c.
Profile/Expertise: see attachment


ID: PO-15-IT-1436
Date: 02.03.2015
Topic:
NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: Protech s.a.s. di Girardi A. & c.
Profile/Expertise: see attachment


ID: PO-15-IT-1435
Date: 02.03.2015
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines
Institution: Protech s.a.s. di Girardi A. & c.
Profile/Expertise: see attachment


ID: PO-15-SI-1431
Date: 26.02.2015
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules

NMP 14 - 2015:
ERA-NET on Materials for Energy

NMP 24 - 2015:
Low-energy solutions for drinking water production
Institution: Institute for Metagenomics and Microbial Technologies
Profile/Expertise: see attachment


ID: PO-15-FR-1430
Date: 26.02.2015
Topic:
NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: TU Bergakademie Freiberg
Profile/Expertise: see attachment


ID: PO-15-SI-1424
Date: 17.02.2015
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: JozefStefan Institute
Profile/Expertise: see attachment


ID: PS-15-UA-1423
Date: 15.02.2015
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: National Technical University Kharkiv Polytechnic Institute
Profile/Expertise: see attachment


ID: PS-15-DE-1418
Date: 12.02.2015
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

MANUNET 5 - 2015:
New manufacturing methods, components and systems (development of demonstrators, devices and equipments, logistic systems, etc.).

MANUNET 6 - 2015:
Other technologies/products related to the manufacturing field.
Institution: Fraunhofer Manufacturing Engineering and Automation IPA
Profile/Expertise: see attachment


ID: PO-15-PT-1417
Date: 12.02.2015
Topic:
FOF-13-2017:
Photonics Laser-based production
Institution: CEMMPRE, Centre for Mechanical Engineering, Materials and Processes
Profile/Expertise: see attachment


ID: PO-15-AZ-1415
Date: 11.02.2015
Topic:
NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)
Institution: Azerbaijan Technical University
Profile/Expertise: see attachment


ID: PS-15-AZ-1414
Date: 10.02.2015
Topic:
NMP 14 - 2015:
ERA-NET on Materials for Energy

NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)
Institution: Azerbaijan Technical University
Profile/Expertise: see attachment


ID: PO-15-SK-1413
Date: 10.02.2015
Topic:
NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs

FETOPEN 1 - 2014/2015:
FET-Open research projects

M-ERA.NET 2 - 2014:
New Surfaces and Coatings
Institution: Integra TDS, s.r.o.
Profile/Expertise: see attachment


ID: PO-15-UA-1412
Date: 09.02.2015
Topic:
NMP 11 - 2015:
Nanomedicine therapy for cancer
Institution: RE Kavetsky Institute of Experimental Pathology, Oncology and Radiobiology, National Academy of Sciences of Ukraine, Kyiv
Profile/Expertise: see attachment


ID: PS-15-IN-1410
Date: 06.02.2015
Topic:
MANUNET 1 - 2015:
Knowledge-based engineering, information and communication technologies for manufacturing (industrial robotics, computer-aided engineering and design, automated manufacturing, product lifetime management, etc.)

MANUNET 2 - 2015:
Manufacturing technologies for environmental and energy applications including resource efficiency and recycling.
Institution: Avrc
Profile/Expertise: see attachment


ID: PO-15-IN-1409
Date: 06.02.2015
Topic:
MANUNET 1 - 2015:
Knowledge-based engineering, information and communication technologies for manufacturing (industrial robotics, computer-aided engineering and design, automated manufacturing, product lifetime management, etc.)

MANUNET 2 - 2015:
Manufacturing technologies for environmental and energy applications including resource efficiency and recycling.

MANUNET 5 - 2015:
New manufacturing methods, components and systems (development of demonstrators, devices and equipments, logistic systems, etc.).
Institution: Avrc
Profile/Expertise: see attachment


ID: PO-15-PL-1408
Date: 06.02.2015
Topic:
NMP 24 - 2015:
Low-energy solutions for drinking water production
Institution: Silesian University of Technology, Faculty of Chemistry, Department of Inorganic, Analytical Chemistry and Electrochemistry
Profile/Expertise: see attachment


ID: PO-15-DE-1407
Date: 06.02.2015
Topic:
NMP 24 - 2015:
Low-energy solutions for drinking water production
Institution: Karlsruhe Institute of Technology
Profile/Expertise: see attachment


ID: PO-15-DE-1406
Date: 06.02.2015
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications
Institution: Karlsruhe Institute of Technology
Profile/Expertise: see attachment


ID: PS-15-DE-1405
Date: 06.02.2015
Topic:
NMP 24 - 2015:
Low-energy solutions for drinking water production
Institution: Karlsruhe Institute of Technology
Profile/Expertise: see attachment


ID: PS-15-DE-1404
Date: 06.02.2015
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications
Institution: Karlsruhe Institute of Technology
Profile/Expertise: see attachment


ID: PO-15-NO-1401
Date: 01.02.2015
Topic:
NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment
Institution: SINTEF Materials and Chemistry
Profile/Expertise: see attachment


ID: PO-15-IT-1400
Date: 26.01.2015
Topic:
NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities

FTI - 2015:
Fast track to Innovation - Pilot
Institution: Fondazione CIFE
Profile/Expertise: see attachment


ID: PS-15-IT-1398
Date: 22.01.2015
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules
Institution: University of Trieste
Profile/Expertise: see attachment


ID: PS-15-IT-1397
Date: 22.01.2015
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules
Institution: University of Trieste
Profile/Expertise: see attachment


ID: PO-15-DE-1396
Date: 21.01.2015
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 30 - 2015:
Next generation tools for risk governance of nanomaterials

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Fraunhofer Institute for Electronic Nano Systems ENAS
Profile/Expertise: see attachment


ID: PO-15-IT-1395
Date: 20.01.2015
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 17 - 2014:
Post-lithium ion batteries for electric automotive applications

M-ERA.NET 6 - 2014:
Functional Materials Focusing on Sensors
Institution: sensichips
Profile/Expertise: see attachment


ID: PS-15-ES-1394
Date: 17.01.2015
Topic:
NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment
Institution: UNIVERSIDAD MIGUEL HERNÁNDEZ DE ELCHE
Profile/Expertise: see attachment


ID: PS-15-PL-1393
Date: 15.01.2015
Topic:
NMP 11 - 2015:
Nanomedicine therapy for cancer
Institution: Lodz Regional Science and Technology Park Ltd.
Profile/Expertise: see attachment


ID: PS-15-UA-1390
Date: 13.01.2015
Topic:
SMEInst-03-2016-2017:
Dedicated support to biotechnology SMEs closing the gap from lab to market

BIOTEC-06-2017:
Optimisation of biocatalysis and downstream processing for the sustainable production of high added-value platform chemicals

BIOTEC-08-2017:
Support for enhancing and demonstrating the impact of KET Biotechnology project
Institution: Sumy State University
Profile/Expertise: see attachment


ID: PO-15-ES-1388
Date: 08.01.2015
Topic:
SPIRE 6 - 2015:
Energy and resource management systems for improved efficiency in the process industries

SPIRE 7 - 2015:
Recovery technologies for metals and other minerals
Institution: Fundación Centro Tecnológico Andaluz de la Piedra
Profile/Expertise: see attachment


ID: PO-14-IT-1383
Date: 22.12.2014
Topic:
SPIRE 5 - 2015:
New adaptable catalytic reactor methodologies for Process Intensification

BIOTEC 2 - 2015:
New bioinformatics approaches in service of biotechnology

BIOTEC 6 - 2015:
Metagenomics as innovation driver
Institution: Solaris Biotechnology srl
Profile/Expertise: see attachment


ID: PO-14-SI-1382
Date: 22.12.2014
Topic:
FTI - 2015:
Fast track to Innovation - Pilot

M-ERA.NET 1 - 2015:
Integrated Computational Materials Engineering

M-ERA.NET 4 - 2015:
Materials for Sustainable and Affordable Low Carbon Energy Technologies
Institution: National Institute of Chemistry Slovenia
Profile/Expertise: see attachment


ID: PO-14-DE-1380
Date: 22.12.2014
Topic:
NMP 7 - 2015:
Additive manufacturing for tabletop nanofactories

FoF 10 - 2015:
Manufacturing of custom made parts for personalised products
Institution: Universität Paderborn
Profile/Expertise: see attachment


ID: PO-14-ES-1379
Date: 18.12.2014
Topic:
FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials
Institution: Fundación Centro Tecnológico Andaluz de la Piedra
Profile/Expertise: see attachment


ID: PO-14-IT-1378
Date: 17.12.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules

NMP 11 - 2015:
Nanomedicine therapy for cancer

FoF 2 - 2014:
Manufacturing processes for complex structures and geometries with efficient use of material
Institution: University of Naples Federico II
Profile/Expertise: see attachment


ID: PO-14-DE-1376
Date: 15.12.2014
Topic:
NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials

NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: Umicore AG&Co KG
Profile/Expertise: see attachment


ID: PO-14-ES-1375
Date: 15.12.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: GOLDEMAR SOLUTIONS
Profile/Expertise: see attachment


ID: PO-14-SI-1373
Date: 11.12.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules

NMP 11 - 2015:
Nanomedicine therapy for cancer

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: National Institute of Chemistry Slovenia
Profile/Expertise: see attachment


ID: PO-14-UA-1371
Date: 02.12.2014
Topic:
NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: National Technical University Kharkiv Polytechnic Institute
Profile/Expertise: see attachment


ID: PO-14-UA-1370
Date: 02.12.2014
Topic:
NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: National Technical University Kharkiv Polytechnic Institute
Profile/Expertise: see attachment


ID: PO-14-UA-1369
Date: 02.12.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 6 - 2015:
Novel nanomatrices and nanocapsules
Institution: National Technical University Kharkiv Polytechnic Institute
Profile/Expertise: see attachment


ID: PS-14-UA-1368
Date: 02.12.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 6 - 2015:
Novel nanomatrices and nanocapsules
Institution: National Technical University Kharkiv Polytechnic Institute
Profile/Expertise: see attachment


ID: PS-14-UA-1367
Date: 02.12.2014
Topic:
NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: National Technical University Kharkiv Polytechnic Institute
Profile/Expertise: see attachment


ID: PS-14-UA-1366
Date: 02.12.2014
Topic:
NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: National Technical University Kharkiv Polytechnic Institute
Profile/Expertise: see attachment


ID: PO-14-GB-1364
Date: 27.11.2014
Topic:
NMP 7 - 2015:
Additive manufacturing for tabletop nanofactories

NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs

FoF 10 - 2015:
Manufacturing of custom made parts for personalised products
Institution: The University of Warwick
Profile/Expertise: see attachment


ID: PO-14-ES-1363
Date: 27.11.2014
Topic:
NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment

NMP 30 - 2015:
Next generation tools for risk governance of nanomaterials

SIINN 2 - 2014:
Toxicity mechanisms
Institution: Universitat de Barcelona
Profile/Expertise: see attachment


ID: PO-14-IT-1362
Date: 27.11.2014
Topic:
NMP 24 - 2015:
Low-energy solutions for drinking water production

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: DIEI - Universty of Cassino
Profile/Expertise: see attachment


ID: PO-14-DE-1361
Date: 27.11.2014
Topic:
FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies

FoF 14 - 2015:
Integrated design and management of production machinery and processes
Institution: engage AG
Profile/Expertise: see attachment


ID: PO-14-DE-1360
Date: 27.11.2014
Topic:
NMP 24 - 2015:
Low-energy solutions for drinking water production

EeB 6 - 2015:
Integrated solutions of thermal energy storage for building applications

SPIRE 7 - 2015:
Recovery technologies for metals and other minerals
Institution: engage AG
Profile/Expertise: see attachment


ID: PO-14-DE-1359
Date: 27.11.2014
Topic:
NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: engage AG
Profile/Expertise: see attachment


ID: PO-14-DE-1358
Date: 27.11.2014
Topic:
NMP 7 - 2015:
Additive manufacturing for tabletop nanofactories

NMP 11 - 2015:
Nanomedicine therapy for cancer

NMP 40 - 2015:
Support for clustering and networking in the micro- & nanofluidics community
Institution: engage AG
Profile/Expertise: see attachment


ID: PO-14-DE-1357
Date: 27.11.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 6 - 2015:
Novel nanomatrices and nanocapsules

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: engage AG
Profile/Expertise: see attachment


ID: PO-14-IT-1356
Date: 27.11.2014
Topic:
NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment

SIINN 2 - 2014:
Toxicity mechanisms

SIINN 4 - 2014:
Environmental impacts of manufactured nanomaterials
Institution: ENEA
Profile/Expertise: see attachment


ID: PO-14-LV-1355
Date: 24.11.2014
Topic:
NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: Institute of Chemical Physics, University of Latvia
Profile/Expertise: see attachment


ID: PO-14-DE-1353
Date: 21.11.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: Fraunhofer Manufacturing Engineering and Automation IPA
Profile/Expertise: see attachment


ID: PO-14-LV-1350
Date: 21.11.2014
Topic:
FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies

FoF 9 - 2015:
ICT Innovation for Manufacturing SMEs (I4MS)
Institution: DPA
Profile/Expertise: see attachment


ID: PO-14-GE-1349
Date: 19.11.2014
Topic:
NMP 15 - 2015:
Materials innovations for the optimisation of cooling in power plants

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities

NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: Ilia State University
Profile/Expertise: see attachment


ID: PO-14-GB-1347
Date: 14.11.2014
Topic:
FoF 14 - 2015:
Integrated design and management of production machinery and processes
Institution: University of Sunderland
Profile/Expertise: see attachment


ID: PO-14-DE-1346
Date: 13.11.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 7 - 2015:
Additive manufacturing for tabletop nanofactories

FoF 10 - 2015:
Manufacturing of custom made parts for personalised products
Institution: Fraunhofer ICT
Profile/Expertise: see attachment


ID: PO-14-DE-1343
Date: 10.11.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: Fraunhofer FEP
Profile/Expertise: see attachment


ID: PO-14-GB-1342
Date: 07.11.2014
Topic:
NMP 8 - 2014:
Scale-up of nanopharmaceuticals production

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities

NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: University of Ulster
Profile/Expertise: see attachment


ID: PO-14-GB-1340
Date: 05.11.2014
Topic:
NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: cranfield university
Profile/Expertise: see attachment


ID: PO-14-CR-1339
Date: 31.10.2014
Topic:
NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment

SIINN 1 - 2014:
Exposure assessment

SIINN 4 - 2014:
Environmental impacts of manufactured nanomaterials
Institution: ITCR
Profile/Expertise: see attachment


ID: PO-14-ES-1337
Date: 31.10.2014
Topic:
NMP 30 - 2015:
Next generation tools for risk governance of nanomaterials

SIINN 2 - 2014:
Toxicity mechanisms

SIINN 4 - 2014:
Environmental impacts of manufactured nanomaterials
Institution: Faculty of Biology, Complutense University
Profile/Expertise: see attachment


ID: PO-14-ES-1336
Date: 28.10.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules
Institution: Institute of Materials Science of Barcelona (ICMAB-CSIC)
Profile/Expertise: see attachment


ID: PO-14-IT-1335
Date: 24.10.2014
Topic:
SPIRE 6 - 2015:
Energy and resource management systems for improved efficiency in the process industries
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-14-IT-1334
Date: 24.10.2014
Topic:
FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies

FoF 13 - 2015:
Re-use and re-manufacturing technologies and equipment for sustainable product life cycle management

FoF 10 - 2015:
Manufacturing of custom made parts for personalised products
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-14-IT-1333
Date: 24.10.2014
Topic:
FoF 11 - 2015:
Flexible production systems based on integrated tools for rapid reconfiguration of machinery and robots

FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials

FoF 14 - 2015:
Integrated design and management of production machinery and processes
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-14-IT-1332
Date: 24.10.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities

NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-14-IT-1331
Date: 24.10.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 7 - 2015:
Additive manufacturing for tabletop nanofactories

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: SOFTER SPA (SO.F.TER. SPA)
Profile/Expertise: see attachment


ID: PO-14-ES-1329
Date: 22.10.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 22 - 2015:
Fibre-based materials for non-clothing applications

FoF 10 - 2015:
Manufacturing of custom made parts for personalised products
Institution: INDUSTRIAL COMPANY IN AUTOMOTIVE SECTOR
Profile/Expertise: see attachment


ID: PO-14-UA-1328
Date: 22.10.2014
Topic:
EeB 5 - 2015:
Innovative design tools for refurbishment at building and district level

EeB 7 - 2015:
New tools and methodologies to reduce the gap between predicted and actual energy performances at the level of buildings and blocks of buildings

SPIRE 6 - 2015:
Energy and resource management systems for improved efficiency in the process industries
Institution: KNUTD
Profile/Expertise: see attachment


ID: PO-14-IT-1327
Date: 21.10.2014
Topic:
NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment

NMP 30 - 2015:
Next generation tools for risk governance of nanomaterials
Institution: Ramazzini Institute
Profile/Expertise: see attachment


ID: PO-14-ES-1326
Date: 21.10.2014
Topic:
SIINN 1 - 2014:
Exposure assessment

SIINN 2 - 2014:
Toxicity mechanisms

SIINN 3 - 2014:
Effects of manufactured nanomaterials on human health
Institution: Universidad de Burgos/ University of Burgos
Profile/Expertise: see attachment


ID: PO-14-FR-1325
Date: 21.10.2014
Topic:
NMP 34 - 2014:
Networking and sharing of best practises in in management of new advanced materials via ecodesign of products, eco-innovation, and product life cycle management
Institution: EcoMundo
Profile/Expertise: see attachment


ID: PO-14-FR-1323
Date: 21.10.2014
Topic:
FoF 5 - 2014:
Innovative product-service design using manufacturing intelligence

FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies

FoF 14 - 2015:
Integrated design and management of production machinery and processes
Institution: EcoMundo
Profile/Expertise: see attachment


ID: PS-14-GB-1322
Date: 21.10.2014
Topic:
FoF 11 - 2015:
Flexible production systems based on integrated tools for rapid reconfiguration of machinery and robots

FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials

FoF 13 - 2015:
Re-use and re-manufacturing technologies and equipment for sustainable product life cycle management
Institution: Cranfield University
Profile/Expertise: see attachment


ID: PS-14-DE-1321
Date: 16.10.2014
Topic:
FoF 4 - 2014:
Developing smart factories that are attractive to workers

FoF 5 - 2014:
Innovative product-service design using manufacturing intelligence

FoF 7 - 2014:
Support for the enhancement of the impact of FoF projects
Institution: Ondics GmbH
Profile/Expertise: see attachment


ID: PO-14-PT-1319
Date: 10.10.2014
Topic:
PILOTS-03-2017:
Pilot Lines for Manufacturing of Nanotextured surfaces with enhanced mechanical properties

NMBP-04-2017:
Architectured / Advanced material concepts for intelligent bulk material structures

NMBP-05-2017:
Advanced materials and innovative design for improved functionality and aesthetic in high added value consumer goods
Institution: CEMMPRE, Centre for Mechanical Engineering, Materials and Processes
Profile/Expertise: see attachment


ID: PO-14-IT-1318
Date: 08.10.2014
Topic:
NMP 11 - 2015:
Nanomedicine therapy for cancer

NMP 14 - 2015:
ERA-NET on Materials for Energy

NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)
Institution: Università di Modena e Reggio Emilia
Profile/Expertise: see attachment


ID: PO-14-FR-1315
Date: 07.10.2014
Topic:
EeB 6 - 2015:
Integrated solutions of thermal energy storage for building applications
Institution: Sparks & Co
Profile/Expertise: see attachment


ID: PO-14-FR-1314
Date: 07.10.2014
Topic:
FoF 14 - 2015:
Integrated design and management of production machinery and processes

SPIRE 5 - 2015:
New adaptable catalytic reactor methodologies for Process Intensification

SPIRE 6 - 2015:
Energy and resource management systems for improved efficiency in the process industries
Institution: Sparks & Co
Profile/Expertise: see attachment


ID: PO-14-FR-1313
Date: 07.10.2014
Topic:
FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies

FoF 13 - 2015:
Re-use and re-manufacturing technologies and equipment for sustainable product life cycle management

FoF 10 - 2015:
Manufacturing of custom made parts for personalised products
Institution: Sparks & Co
Profile/Expertise: see attachment


ID: PO-14-FR-1312
Date: 07.10.2014
Topic:
NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment

NMP 30 - 2015:
Next generation tools for risk governance of nanomaterials

NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: Sparks & Co
Profile/Expertise: see attachment


ID: PO-14-FR-1311
Date: 07.10.2014
Topic:
NMP 11 - 2015:
Nanomedicine therapy for cancer

NMP 12 - 2015:
Biomaterials for treatment and prevention of Alzheimer’s disease

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: Sparks & Co
Profile/Expertise: see attachment


ID: PO-14-FR-1310
Date: 07.10.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules

NMP 7 - 2015:
Additive manufacturing for tabletop nanofactories

NMP 17 - 2014:
Post-lithium ion batteries for electric automotive applications
Institution: Sparks & Co
Profile/Expertise: see attachment


ID: PO-14-FR-1309
Date: 07.10.2014
Topic:
BIOTEC 2 - 2015:
New bioinformatics approaches in service of biotechnology

BIOTEC 6 - 2015:
Metagenomics as innovation driver

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Sparks & Co
Profile/Expertise: see attachment


ID: PO-14-BE-1308
Date: 06.10.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules
Institution: EMAT, University of Antwerp
Profile/Expertise: see attachment


ID: PO-14-BE-1306
Date: 06.10.2014
Topic:
NMP 14 - 2015:
ERA-NET on Materials for Energy

NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

NMP 17 - 2014:
Post-lithium ion batteries for electric automotive applications
Institution: EMAT, University of Antwerp
Profile/Expertise: see attachment


ID: PO-14-DE-1299
Date: 02.10.2014
Topic:
NMP 11 - 2015:
Nanomedicine therapy for cancer

NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment

NMP 30 - 2015:
Next generation tools for risk governance of nanomaterials
Institution: Fraunhofer ITEM
Profile/Expertise: see attachment


ID: PO-14-SK-1297
Date: 26.09.2014
Topic:
FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials
Institution: PRVA ZVARACSKA, a.s.
Profile/Expertise: see attachment


ID: PS-14-FR-1296
Date: 24.09.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules
Institution: Institut Jean Lamour
Profile/Expertise: see attachment


ID: PO-14-HU-1295
Date: 18.09.2014
Topic:
FoF 2 - 2014:
Manufacturing processes for complex structures and geometries with efficient use of material

FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials
Institution: Budapest Univerity of technology and Economics (BME), Department of Automobiles and Vehicle Manufacturing
Profile/Expertise: see attachment


ID: PO-14-ES-1294
Date: 16.09.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: National Centre for Metallurgical Research, CENIM (CSIC)
Profile/Expertise: see attachment


ID: PO-14-DE-1293
Date: 16.09.2014
Topic:
NMP 24 - 2015:
Low-energy solutions for drinking water production

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: Leibniz Institute of Polymer Research Dreseden
Profile/Expertise: see attachment


ID: PO-14-FR-1292
Date: 16.09.2014
Topic:
NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs

SPIRE 2 - 2014:
Adaptable industrial processes allowing the use of renewables as flexible feedstock for chemical and energy applications

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: Natureplast / Biopolynov
Profile/Expertise: see attachment


ID: PO-14-FR-1291
Date: 15.09.2014
Topic:
EeB 1 - 2014:
Materials for building envelope

EeB 5 - 2015:
Innovative design tools for refurbishment at building and district level

EeB 7 - 2015:
New tools and methodologies to reduce the gap between predicted and actual energy performances at the level of buildings and blocks of buildings
Institution: EcoMundo
Profile/Expertise: see attachment


ID: PO-14-PL-1290
Date: 15.09.2014
Topic:
SPIRE 6 - 2015:
Energy and resource management systems for improved efficiency in the process industries
Institution: University of Zielona Gora, Institute of Electrical Engineering
Profile/Expertise: see attachment


ID: PO-14-PL-1289
Date: 15.09.2014
Topic:
EeB 8 - 2015:
Integrated approach to retrofitting of residential buildings
Institution: University of Zielona Gora, Institute of Electrical Engineering
Profile/Expertise: see attachment


ID: PO-14-DE-1288
Date: 12.09.2014
Topic:
NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

NMP 23 - 2015:
Novel materials by design for substituting critical materials

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: Leibniz-Institut fur Polymerforschung Dresden e.V.
Profile/Expertise: see attachment


ID: PO-14-RS-1287
Date: 09.09.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules
Institution: Institute for Medicinal Plants Researh
Profile/Expertise: see attachment


ID: PS-14-ES-1285
Date: 09.09.2014
Topic:
FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials
Institution: AIMEN Technology Centre
Profile/Expertise: see attachment


ID: PS-14-BE-1284
Date: 03.09.2014
Topic:
NMP 17 - 2014:
Post-lithium ion batteries for electric automotive applications
Institution: ZAZ Ventures
Profile/Expertise: see attachment


ID: PO-14-TR-1283
Date: 03.09.2014
Topic:
M-ERA.NET 2 - 2014:
New Surfaces and Coatings

M-ERA.NET 3 - 2014:
Composite Technology
Institution: Nanografi
Profile/Expertise: see attachment


ID: PO-14-SI-1280
Date: 02.09.2014
Topic:
FoF 11 - 2015:
Flexible production systems based on integrated tools for rapid reconfiguration of machinery and robots

FoF 14 - 2015:
Integrated design and management of production machinery and processes

FoF 13 - 2015:
Re-use and re-manufacturing technologies and equipment for sustainable product life cycle management
Institution: TCS-Toolmakers Cluster of Slovenia
Profile/Expertise: see attachment


ID: PO-14-FR-1279
Date: 02.09.2014
Topic:
FoF 3 - 2014:
Global energy and other resources efficiency in manufacturing enterprises

FoF 9 - 2015:
ICT Innovation for Manufacturing SMEs (I4MS)

FoF 13 - 2015:
Re-use and re-manufacturing technologies and equipment for sustainable product life cycle management
Institution: EcoMundo
Profile/Expertise: see attachment


ID: PO-14-IT-1278
Date: 02.09.2014
Topic:
FoF 11 - 2015:
Flexible production systems based on integrated tools for rapid reconfiguration of machinery and robots

FETOPEN 1 - 2014/2015:
FET-Open research projects

FETOPEN 2 - 2014:
Coordination and Support Activities 2014
Institution: SIGMA 4 S.p.a.
Profile/Expertise: see attachment


ID: PO-14-TR-1274
Date: 29.08.2014
Topic:
M-ERA.NET 2 - 2014:
New Surfaces and Coatings

M-ERA.NET 5 - 2014:
Materials for Health

M-ERA.NET 6 - 2014:
Functional Materials Focusing on Sensors
Institution: Izmir Institute of Technology
Profile/Expertise: see attachment


ID: PO-14-TR-1273
Date: 29.08.2014
Topic:
FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Izmir Institute of Technology
Profile/Expertise: see attachment


ID: PO-14-TR-1272
Date: 29.08.2014
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

NMP 6 - 2015:
Novel nanomatrices and nanocapsules

NMP 11 - 2015:
Nanomedicine therapy for cancer
Institution: Izmir Institute of Technology
Profile/Expertise: see attachment


ID: PO-14-ES-1271
Date: 28.08.2014
Topic:
SPIRE 5 - 2015:
New adaptable catalytic reactor methodologies for Process Intensification
Institution: Andaltec
Profile/Expertise: see attachment


ID: PO-14-ES-1270
Date: 28.08.2014
Topic:
BIOTEC 5 - 2015:
SME-boosting biotechnology-based industrial processes driving competitiveness and sustainability
Institution: Andaltec
Profile/Expertise: see attachment


ID: PO-14-ES-1269
Date: 28.08.2014
Topic:
NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment

NMP 30 - 2015:
Next generation tools for risk governance of nanomaterials
Institution: Andaltec
Profile/Expertise: see attachment


ID: PS-14-ES-1268
Date: 28.08.2014
Topic:
M-ERA.NET 3 - 2014:
Composite Technology
Institution: ICUBE
Profile/Expertise: see attachment


ID: PS-14-IT-1267
Date: 24.08.2014
Topic:
BIOTEC 6 - 2015:
Metagenomics as innovation driver

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Private
Profile/Expertise: see attachment


ID: PO-14-IE-1263
Date: 22.08.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 17 - 2014:
Post-lithium ion batteries for electric automotive applications

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: Sonex- Metrology
Profile/Expertise: see attachment


ID: PO-14-DE-1261
Date: 20.08.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

M-ERA.NET 2 - 2014:
New Surfaces and Coatings

M-ERA.NET 3 - 2014:
Composite Technology
Institution: Fraunhofer ITWM
Profile/Expertise: see attachment


ID: PO-14-IT-1260
Date: 18.08.2014
Topic:
FoF 2 - 2014:
Manufacturing processes for complex structures and geometries with efficient use of material

FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials

M-ERA.NET 1 - 2014:
Integrated Computational Materials Engineering
Institution: Dept. Industrial Engineering - University of Parma
Profile/Expertise: see attachment


ID: PO-14-SI-1259
Date: 18.08.2014
Topic:
FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies

FoF 9 - 2015:
ICT Innovation for Manufacturing SMEs (I4MS)

FoF 10 - 2015:
Manufacturing of custom made parts for personalised products
Institution: TCS-Toolmakers Cluster of Slovenia
Profile/Expertise: see attachment


ID: PO-14-SI-1258
Date: 18.08.2014
Topic:
FoF 11 - 2015:
Flexible production systems based on integrated tools for rapid reconfiguration of machinery and robots

FoF 14 - 2015:
Integrated design and management of production machinery and processes

FoF 9 - 2015:
ICT Innovation for Manufacturing SMEs (I4MS)
Institution: TCS-Toolmakers Cluster of Slovenia
Profile/Expertise: see attachment


ID: PO-14-SI-1257
Date: 18.08.2014
Topic:
FoF 11 - 2015:
Flexible production systems based on integrated tools for rapid reconfiguration of machinery and robots

FoF 13 - 2015:
Re-use and re-manufacturing technologies and equipment for sustainable product life cycle management

FoF 10 - 2015:
Manufacturing of custom made parts for personalised products
Institution: TCS-Toolmakers Cluster of Slovenia
Profile/Expertise: see attachment


ID: PO-14-SI-1256
Date: 18.08.2014
Topic:
FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies

FoF 11 - 2015:
Flexible production systems based on integrated tools for rapid reconfiguration of machinery and robots

FoF 9 - 2015:
ICT Innovation for Manufacturing SMEs (I4MS)
Institution: TCS-Toolmakers Cluster of Slovenia
Profile/Expertise: see attachment


ID: PO-14-UA-1254
Date: 07.08.2014
Topic:
FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials
Institution: National Science Center "Kharkiv Institure of Physics and Technology" (NSC KIPT)
Profile/Expertise: see attachment


ID: PO-14-ES-1252
Date: 05.08.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules
Institution: Andaltec
Profile/Expertise: see attachment


ID: PO-14-DE-1251
Date: 05.08.2014
Topic:
FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials
Institution: Technische Universität Chemnitz - Professorship Micromanufacturing Technology
Profile/Expertise: see attachment


ID: PS-14-DE-1250
Date: 04.08.2014
Topic:
FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies
Institution: Institute for Information Management in Mechanical Engineering - RWTH Aachen University
Profile/Expertise: see attachment


ID: PO-14-DE-1249
Date: 04.08.2014
Topic:
FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies
Institution: Institute for Information Management in Mechanical Engineering - RWTH Aachen University
Profile/Expertise: see attachment


ID: PO-14-DE-1248
Date: 01.08.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines
Institution: TU Dresden (Institut für Aufbau- und Verbindungstechnik der Elektronik)
Profile/Expertise: see attachment


ID: PO-14-SI-1247
Date: 31.07.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities

NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: University of Nova Gorica
Profile/Expertise: see attachment


ID: PO-14-FR-1246
Date: 31.07.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 24 - 2015:
Low-energy solutions for drinking water production
Institution: Up-tex
Profile/Expertise: see attachment


ID: PO-14-FR-1245
Date: 31.07.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 24 - 2015:
Low-energy solutions for drinking water production

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: Up-tex
Profile/Expertise: see attachment


ID: PO-14-IT-1243
Date: 24.07.2014
Topic:
NMP 14 - 2015:
ERA-NET on Materials for Energy

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities

M-ERA.NET 4 - 2014:
Materials for Sustainable and Affordable Low Carbon Energy Technologies
Institution: ICCOM-CNR
Profile/Expertise: see attachment


ID: PO-14-HU-1242
Date: 22.07.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities

M-ERA.NET 3 - 2014:
Composite Technology
Institution: Budapest University of Technology and Economics
Profile/Expertise: see attachment


ID: PS-14-IT-1239
Date: 16.07.2014
Topic:
FoF 5 - 2014:
Innovative product-service design using manufacturing intelligence

FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies

FoF 11 - 2015:
Flexible production systems based on integrated tools for rapid reconfiguration of machinery and robots
Institution: Sidel S.p.A.
Profile/Expertise: see attachment


ID: PO-14-DE-1236
Date: 16.07.2014
Topic:
FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies

NMP 23 - 2015:
Novel materials by design for substituting critical materials

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Fraunhofer SCAI
Profile/Expertise: see attachment


ID: PO-14-IT-1234
Date: 11.07.2014
Topic:
NMP 1 - 2014:
Open access pilot lines for cost effective nanocomposites

NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Nanesa S.r.l.
Profile/Expertise: see attachment


ID: PO-14-AM-1233
Date: 08.07.2014
Topic:
BIOTEC 1 - 2014:
Synthetic biology - construction of organisms for new products and processes
Institution: Armenian Technological Academy
Profile/Expertise: see attachment


ID: PO-14-AM-1232
Date: 08.07.2014
Topic:
FETOPEN 3 - 2015:
Coordination and Support Activities 2015
Institution: Armenian Technological Academy
Profile/Expertise: see attachment


ID: PO-14-ES-1231
Date: 07.07.2014
Topic:
FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials

FoF 13 - 2015:
Re-use and re-manufacturing technologies and equipment for sustainable product life cycle management

FoF 10 - 2015:
Manufacturing of custom made parts for personalised products
Institution: Faurecia Interior Systems SALC
Profile/Expertise: see attachment


ID: PO-14-ES-1230
Date: 07.07.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 22 - 2015:
Fibre-based materials for non-clothing applications
Institution: Faurecia Interior Systems SALC
Profile/Expertise: see attachment


ID: PS-14-ES-1228
Date: 26.06.2014
Topic:
FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials
Institution: AIMEN Technology Centre
Profile/Expertise: see attachment


ID: PO-14-FR-1224
Date: 24.06.2014
Topic:
NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

NMP 17 - 2014:
Post-lithium ion batteries for electric automotive applications
Institution: ARMOR SA
Profile/Expertise: see attachment


ID: PS-14-PL-1222
Date: 12.06.2014
Topic:
M-ERA.NET 2 - 2014:
New Surfaces and Coatings
Institution: Warsaw University of Technology, Faculty of Materials Science and Engineering
Profile/Expertise: see attachment


ID: PO-14-AR-1221
Date: 10.06.2014
Topic:
EeB 6 - 2015:
Integrated solutions of thermal energy storage for building applications

EeB 7 - 2015:
New tools and methodologies to reduce the gap between predicted and actual energy performances at the level of buildings and blocks of buildings

ERA-MIN 2nd joint call 2014;:
Daedline: 17/06/2014
Institution: Universidad Tecnologica Nacional
Profile/Expertise: see attachment


ID: PO-14-DE-1220
Date: 06.06.2014
Topic:
FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies

FoF 11 - 2015:
Flexible production systems based on integrated tools for rapid reconfiguration of machinery and robots

FoF 14 - 2015:
Integrated design and management of production machinery and processes
Institution: Fraunhofer Institute for Production Technology
Profile/Expertise: see attachment


ID: PS-14-DE-1219
Date: 06.06.2014
Topic:
FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies
Institution: Fraunhofer Institute for Production Technology
Profile/Expertise: see attachment


ID: PO-14-MD-1217
Date: 05.06.2014
Topic:
NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs

SPIRE 4 - 2014:
Methodologies, tools and indicators for cross-sectorial sustainability assessment of energy and resource efficient solutions in the process industry
Institution: Greentown Systems
Profile/Expertise: see attachment


ID: PO-14-DE-1216
Date: 05.06.2014
Topic:
NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: Fraunhofer ICT-IMM
Profile/Expertise: see attachment


ID: PO-14-IS-1215
Date: 03.06.2014
Topic:
FETOPEN 1 - 2014/2015:
FET-Open research projects

FETOPEN 2 - 2014:
Coordination and Support Activities 2014

FETOPEN 3 - 2015:
Coordination and Support Activities 2015
Institution: The Icelandic Center for Research - Rannis
Profile/Expertise: see attachment


ID: PO-14-IE-1212
Date: 27.05.2014
Topic:
BIOTEC 2 - 2015:
New bioinformatics approaches in service of biotechnology

BIOTEC 6 - 2015:
Metagenomics as innovation driver

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Alimentary Pharmabiotic Centre
Profile/Expertise: see attachment


ID: PO-14-DE-1211
Date: 21.05.2014
Topic:
NMP 24 - 2015:
Low-energy solutions for drinking water production

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: University of Bremen, Advanced Ceramics
Profile/Expertise: see attachment


ID: PS-14-NO-1210
Date: 20.05.2014
Topic:
FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Cape Engineering
Profile/Expertise: see attachment


ID: PO-14-IT-1209
Date: 19.05.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 12 - 2015:
Biomaterials for treatment and prevention of Alzheimer’s disease
Institution: National Research Council - Institute of Biophysics - Nanoscopy Lab
Profile/Expertise: see attachment


ID: PO-14-CZ-1207
Date: 13.05.2014
Topic:
NMP 24 - 2015:
Low-energy solutions for drinking water production
Institution: Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Process Engineering
Profile/Expertise: see attachment


ID: PO-14-CZ-1206
Date: 13.05.2014
Topic:
SPIRE 5 - 2015:
New adaptable catalytic reactor methodologies for Process Intensification

SPIRE 6 - 2015:
Energy and resource management systems for improved efficiency in the process industries

SPIRE 8 - 2015:
Solids handling for intensivied process technology
Institution: Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Process Engineering
Profile/Expertise: see attachment


ID: PO-14-CZ-1205
Date: 13.05.2014
Topic:
SPIRE 2 - 2014:
Adaptable industrial processes allowing the use of renewables as flexible feedstock for chemical and energy applications

BIOTEC 5 - 2015:
SME-boosting biotechnology-based industrial processes driving competitiveness and sustainability
Institution: Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Process Engineering
Profile/Expertise: see attachment


ID: PS-14-IT-1203
Date: 13.05.2014
Topic:
NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs
Institution: PBK
Profile/Expertise: see attachment


ID: PS-14-IT-1202
Date: 12.05.2014
Topic:
NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs
Institution: C.A.T. Progetti SRL
Profile/Expertise: see attachment


ID: PO-14-DE-1194
Date: 05.05.2014
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 6 - 2015:
Novel nanomatrices and nanocapsules
Institution: TU Ilmenau - Institute for Materials Engineering and Institute of Micro- and Nanotechnologies MacroNano(R)
Profile/Expertise: see attachment


ID: PO-14-IT-1191
Date: 30.04.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules

NMP 7 - 2015:
Additive manufacturing for tabletop nanofactories

NMP 8 - 2014:
Scale-up of nanopharmaceuticals production
Institution: CNR-SPIN
Profile/Expertise: see attachment


ID: PO-14-IT-1190
Date: 30.04.2014
Topic:
EeB 1 - 2014:
Materials for building envelope

BIOTEC 1 - 2014:
Synthetic biology - construction of organisms for new products and processes

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: CNR-SPIN
Profile/Expertise: see attachment


ID: PO-14-IT-1189
Date: 30.04.2014
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

FETOPEN 1 - 2014/2015:
FET-Open research projects

ERA-MIN 2nd joint call 2014;:
Daedline: 17/06/2014
Institution: CNR-SPIN
Profile/Expertise: see attachment


ID: PO-14-DE-1182
Date: 15.04.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules

NMP 11 - 2015:
Nanomedicine therapy for cancer

NMP 12 - 2015:
Biomaterials for treatment and prevention of Alzheimer’s disease
Institution: University of Bremen
Profile/Expertise: see attachment


ID: PS-14-ES-1179
Date: 14.04.2014
Topic:
NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications
Institution: Lurederra, Foundation for the Technical and Social Development
Profile/Expertise: see attachment


ID: PO-14-IT-1178
Date: 14.04.2014
Topic:
NMP 27 - 2014:
Coordination of EU and international efforts in safety of nanotechnology

NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment

NMP 30 - 2015:
Next generation tools for risk governance of nanomaterials
Institution: HiQ-Nano s.r.l.
Profile/Expertise: see attachment


ID: PO-14-FR-1175
Date: 04.04.2014
Topic:
NMP 13 - 2014:
Storage of energy produced by decentralised sources

NMP 15 - 2015:
Materials innovations for the optimisation of cooling in power plants

NMP 20 - 2014:
Widening materials models
Institution: SIMTEC
Profile/Expertise: see attachment


ID: PS-14-ES-1174
Date: 03.04.2014
Topic:
NMP 8 - 2014:
Scale-up of nanopharmaceuticals production
Institution: Yflow
Profile/Expertise: see attachment


ID: PO-14-SI-1173
Date: 02.04.2014
Topic:
FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: National Institute of Chemistry
Profile/Expertise: see attachment


ID: PO-14-ES-1170
Date: 31.03.2014
Topic:
EeB 7 - 2015:
New tools and methodologies to reduce the gap between predicted and actual energy performances at the level of buildings and blocks of buildings
Institution: Satel Spain
Profile/Expertise: see attachment


ID: PS-14-ES-1169
Date: 28.03.2014
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials
Institution: Yflow
Profile/Expertise: see attachment


ID: PO-14-IT-1168
Date: 28.03.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules

NMP 11 - 2015:
Nanomedicine therapy for cancer

NMP 12 - 2015:
Biomaterials for treatment and prevention of Alzheimer’s disease
Institution: italian national Research Council
Profile/Expertise: see attachment


ID: PO-14-DE-1167
Date: 28.03.2014
Topic:
NMP 1 - 2014:
Open access pilot lines for cost effective nanocomposites

NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines
Institution: Technische Universität Chemnitz, Institute of Materials Science and Engineering
Profile/Expertise: see attachment


ID: PO-14-IT-1166
Date: 25.03.2014
Topic:
FoF 3 - 2014:
Global energy and other resources efficiency in manufacturing enterprises

SPIRE 4 - 2014:
Methodologies, tools and indicators for cross-sectorial sustainability assessment of energy and resource efficient solutions in the process industry
Institution: ITAS SPA
Profile/Expertise: see attachment


ID: PO-14-GR-1164
Date: 22.03.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

EeB 8 - 2015:
Integrated approach to retrofitting of residential buildings

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Democritus University of Thrace Reinforced Concrete Laboratory
Profile/Expertise: see attachment


ID: PO-14-FR-1163
Date: 20.03.2014
Topic:
NMP 11 - 2015:
Nanomedicine therapy for cancer
Institution: nanobacterie
Profile/Expertise: see attachment


ID: PO-14-BE-1160
Date: 19.03.2014
Topic:
NMP 27 - 2014:
Coordination of EU and international efforts in safety of nanotechnology
Institution: IMEC vzw
Profile/Expertise: see attachment


ID: PO-14-DE-1159
Date: 16.03.2014
Topic:
FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: TU Chemnitz/ Institute of Materials Science and Engineering
Profile/Expertise: see attachment


ID: PO-14-DE-1158
Date: 16.03.2014
Topic:
FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials
Institution: TU Chemnitz/ Institute of Materials Science and Engineering
Profile/Expertise: see attachment


ID: PO-14-DE-1157
Date: 16.03.2014
Topic:
NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: TU Chemnitz/ Institute of Materials Science and Engineering
Profile/Expertise: see attachment


ID: PO-14-DE-1156
Date: 16.03.2014
Topic:
NMP 18 - 2014:
Materials solutions for use in the creative industry sector
Institution: TU Chemnitz/ Institute of Materials Science and Engineering
Profile/Expertise: see attachment


ID: PO-14-DE-1155
Date: 16.03.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications
Institution: TU Chemnitz/ Institute of Materials Science and Engineering
Profile/Expertise: see attachment


ID: PO-14-DE-1154
Date: 16.03.2014
Topic:
NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)
Institution: TU Chemnitz/ Institute of Materials Science and Engineering
Profile/Expertise: see attachment


ID: PO-14-UA-1152
Date: 14.03.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities

FETOPEN 3 - 2015:
Coordination and Support Activities 2015
Institution: National University of Shipbuilding
Profile/Expertise: see attachment


ID: PO-14-US-1151
Date: 13.03.2014
Topic:
NMP 35 - 2014:
Business models with new supply chains for sustainable customer-driven small series production
Institution: JB Design LLC and Avalhe LLC
Profile/Expertise: see attachment


ID: PO-14-ES-1150
Date: 13.03.2014
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

NMP 8 - 2014:
Scale-up of nanopharmaceuticals production

NMP 22 - 2015:
Fibre-based materials for non-clothing applications
Institution: Yflow
Profile/Expertise: see attachment


ID: PO-14-IE-1149
Date: 13.03.2014
Topic:
FoF 2 - 2014:
Manufacturing processes for complex structures and geometries with efficient use of material

FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials

FoF 10 - 2015:
Manufacturing of custom made parts for personalised products
Institution: National Centre for Laser Applications
Profile/Expertise: see attachment


ID: PO-14-UA-1148
Date: 12.03.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs
Institution: National University of Shipbuilding
Profile/Expertise: see attachment


ID: PO-14-IT-1146
Date: 11.03.2014
Topic:
NMP 21 - 2014:
Materials-based solutions for the protection or preservation of European cultural heritage

EeB 1 - 2014:
Materials for building envelope

EeB 2 - 2014:
Adaptable envelopes integrated in building refurbishment projects
Institution: Università Politecnica delle Marche (UNIVPM)
Profile/Expertise: see attachment


ID: PO-14-IT-1145
Date: 11.03.2014
Topic:
EeB 3 - 2014:
Development of new self-inspection techniques and quality check measures for efficient construction processes
Institution: So.Ri.Ser. S.c.r.l.
Profile/Expertise: see attachment


ID: PO-14-DE-1144
Date: 11.03.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications
Institution: Technische Universität Chemnitz, Institute of Materials Science and Engineering, Chair Composite Materials
Profile/Expertise: see attachment


ID: PO-14-GB-1139
Date: 05.03.2014
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications

NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines
Institution: University of Leicester
Profile/Expertise: see attachment


ID: PO-14-ES-1138
Date: 04.03.2014
Topic:
NMP 21 - 2014:
Materials-based solutions for the protection or preservation of European cultural heritage
Institution: Universidad Politécnica de Madrid (I2A2-UPM)
Profile/Expertise: see attachment


ID: PO-14-DE-1137
Date: 04.03.2014
Topic:
FoF 2 - 2014:
Manufacturing processes for complex structures and geometries with efficient use of material

FoF 12 - 2015:
Industrial technologies for advanced joining and assembly processes of multi-materials
Institution: AQcomputare
Profile/Expertise: see attachment


ID: PO-14-DE-1136
Date: 04.03.2014
Topic:
NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: AQcomputare
Profile/Expertise: see attachment


ID: PO-14-DE-1135
Date: 04.03.2014
Topic:
NMP 20 - 2014:
Widening materials models
Institution: AQcomputare
Profile/Expertise: see attachment


ID: PO-14-DE-1134
Date: 04.03.2014
Topic:
NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: AQcomputare
Profile/Expertise: see attachment


ID: PO-14-DE-1133
Date: 04.03.2014
Topic:
NMP 13 - 2014:
Storage of energy produced by decentralised sources

NMP 17 - 2014:
Post-lithium ion batteries for electric automotive applications

NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: AQcomputare
Profile/Expertise: see attachment


ID: PO-14-FR-1131
Date: 04.03.2014
Topic:
FoF 4 - 2014:
Developing smart factories that are attractive to workers
Institution: ELCOM
Profile/Expertise: see attachment


ID: PS-14-DK-1128
Date: 25.02.2014
Topic:
NMP 35 - 2014:
Business models with new supply chains for sustainable customer-driven small series production
Institution: sefremad.dk
Profile/Expertise: see attachment


ID: PO-14-ES-1127
Date: 24.02.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules

NMP 11 - 2015:
Nanomedicine therapy for cancer

NMP 12 - 2015:
Biomaterials for treatment and prevention of Alzheimer’s disease
Institution: Universidad de Santiago de Compostela
Profile/Expertise: see attachment


ID: PO-14-GB-1126
Date: 21.02.2014
Topic:
NMP 13 - 2014:
Storage of energy produced by decentralised sources

NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

NMP 17 - 2014:
Post-lithium ion batteries for electric automotive applications
Institution: Zapgocharger Ltd
Profile/Expertise: see attachment


ID: PO-14-ES-1125
Date: 21.02.2014
Topic:
NMP 21 - 2014:
Materials-based solutions for the protection or preservation of European cultural heritage
Institution: AICE-ITC
Profile/Expertise: see attachment


ID: PO-14-IT-1124
Date: 21.02.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

FoF 2 - 2014:
Manufacturing processes for complex structures and geometries with efficient use of material

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Termotech Exo srl
Profile/Expertise: see attachment


ID: PO-14-ES-1122
Date: 20.02.2014
Topic:
NMP 21 - 2014:
Materials-based solutions for the protection or preservation of European cultural heritage

EeB 1 - 2014:
Materials for building envelope

EeB 6 - 2015:
Integrated solutions of thermal energy storage for building applications
Institution: Instituto de Ciencia de Materiales de Madrid-CSIC
Profile/Expertise: see attachment


ID: PO-14-ES-1121
Date: 20.02.2014
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications
Institution: CEMITEC
Profile/Expertise: see attachment


ID: PO-14-ES-1120
Date: 20.02.2014
Topic:
NMP 1 - 2014:
Open access pilot lines for cost effective nanocomposites

NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs

NMP 18 - 2014:
Materials solutions for use in the creative industry sector
Institution: CEMITEC
Profile/Expertise: see attachment


ID: PO-14-ES-1119
Date: 20.02.2014
Topic:
EeB 6 - 2015:
Integrated solutions of thermal energy storage for building applications

EeB 7 - 2015:
New tools and methodologies to reduce the gap between predicted and actual energy performances at the level of buildings and blocks of buildings
Institution: QUANTITAS ENERGY, S.L.
Profile/Expertise: see attachment


ID: PO-14-ES-1118
Date: 20.02.2014
Topic:
SPIRE 3 - 2014:
Improved downstream processing of mixtures in process industries

SPIRE 4 - 2014:
Methodologies, tools and indicators for cross-sectorial sustainability assessment of energy and resource efficient solutions in the process industry

SPIRE 6 - 2015:
Energy and resource management systems for improved efficiency in the process industries
Institution: QUANTITAS ENERGY, S.L.
Profile/Expertise: see attachment


ID: PO-14-ES-1117
Date: 20.02.2014
Topic:
FoF 3 - 2014:
Global energy and other resources efficiency in manufacturing enterprises

SPIRE 1 - 2014:
Integrated Process Control

SPIRE 2 - 2014:
Adaptable industrial processes allowing the use of renewables as flexible feedstock for chemical and energy applications
Institution: QUANTITAS ENERGY, S.L.
Profile/Expertise: see attachment


ID: PO-14-ES-1116
Date: 19.02.2014
Topic:
FoF 1 - 2014:
Process optimisation of manufacturing assets
Institution: Instituto Tecnologico de Aragon
Profile/Expertise: see attachment


ID: PO-14-FR-1115
Date: 19.02.2014
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications

NMP 36 - 2014:
Facilitating knowledge management, networking and coordination in NMP
Institution: NanoThinking
Profile/Expertise: see attachment


ID: PO-14-IT-1114
Date: 19.02.2014
Topic:
NMP 28 - 2014:
Assessment of environmental fate of nanomaterials

NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment

NMP 35 - 2014:
Business models with new supply chains for sustainable customer-driven small series production
Institution: tor vergata university
Profile/Expertise: see attachment


ID: PO-14-IT-1113
Date: 19.02.2014
Topic:
NMP 28 - 2014:
Assessment of environmental fate of nanomaterials

NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment

NMP 35 - 2014:
Business models with new supply chains for sustainable customer-driven small series production
Institution: institute for environmental protection and research
Profile/Expertise: see attachment


ID: PO-14-ES-1112
Date: 18.02.2014
Topic:
NMP 1 - 2014:
Open access pilot lines for cost effective nanocomposites
Institution: Leitat Technological Center
Profile/Expertise: see attachment


ID: PO-14-ES-1111
Date: 18.02.2014
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications
Institution: Leitat Technological Center
Profile/Expertise: see attachment


ID: PO-14-ES-1110
Date: 17.02.2014
Topic:
NMP 18 - 2014:
Materials solutions for use in the creative industry sector

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities

NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: National Cente for Metallurgical Research/Spanish National Research Council
Profile/Expertise: see attachment


ID: PO-14-ES-1109
Date: 17.02.2014
Topic:
NMP 13 - 2014:
Storage of energy produced by decentralised sources
Institution: AIJU (Energy Area)
Profile/Expertise: see attachment


ID: PO-14-DE-1108
Date: 17.02.2014
Topic:
NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities
Institution: Fraunhofer Institute for High-Speed-Dynamics, EMI
Profile/Expertise: see attachment


ID: PO-14-DE-1107
Date: 17.02.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications
Institution: Fraunhofer Institute for High-Speed-Dynamics, EMI
Profile/Expertise: see attachment


ID: PO-14-DE-1106
Date: 17.02.2014
Topic:
NMP 20 - 2014:
Widening materials models
Institution: Fraunhofer Institute for High-Speed-Dynamics, EMI
Profile/Expertise: see attachment


ID: PO-14-DE-1105
Date: 17.02.2014
Topic:
NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: Fraunhofer Institute for High-Speed-Dynamics, EMI
Profile/Expertise: see attachment


ID: PO-14-ES-1102
Date: 13.02.2014
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications

NMP 7 - 2015:
Additive manufacturing for tabletop nanofactories
Institution: Fundacion Cetena
Profile/Expertise: see attachment


ID: PO-14-CZ-1100
Date: 13.02.2014
Topic:
NMP 10 - 2014:
Biomaterials for the treatment of Diabetes Mellitus
Institution: Central European Institute of Technology - Masaryk University
Profile/Expertise: see attachment


ID: PO-14-DE-1099
Date: 13.02.2014
Topic:
NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications
Institution: Kirchhoff Institute for Physics, Heidelberg University
Profile/Expertise: see attachment


ID: PO-14-FR-1098
Date: 12.02.2014
Topic:
FoF 2 - 2014:
Manufacturing processes for complex structures and geometries with efficient use of material

SPIRE 1 - 2014:
Integrated Process Control

SPIRE 3 - 2014:
Improved downstream processing of mixtures in process industries
Institution: RHEONIS
Profile/Expertise: see attachment


ID: PO-14-CY-1097
Date: 12.02.2014
Topic:
NMP 14 - 2015:
ERA-NET on Materials for Energy

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: University of Cyprus
Profile/Expertise: see attachment


ID: PO-14-DE-1096
Date: 12.02.2014
Topic:
SPIRE 1 - 2014:
Integrated Process Control

SPIRE 3 - 2014:
Improved downstream processing of mixtures in process industries

SPIRE 2 - 2014:
Adaptable industrial processes allowing the use of renewables as flexible feedstock for chemical and energy applications
Institution: Rubotherm GmbH
Profile/Expertise: see attachment


ID: PO-14-ES-1095
Date: 11.02.2014
Topic:
NMP 1 - 2014:
Open access pilot lines for cost effective nanocomposites

NMP 8 - 2014:
Scale-up of nanopharmaceuticals production

FoF 2 - 2014:
Manufacturing processes for complex structures and geometries with efficient use of material
Institution: RAMEM
Profile/Expertise: see attachment


ID: PO-14-UA-1094
Date: 10.02.2014
Topic:
SPIRE 4 - 2014:
Methodologies, tools and indicators for cross-sectorial sustainability assessment of energy and resource efficient solutions in the process industry

SPIRE 7 - 2015:
Recovery technologies for metals and other minerals
Institution: National Metallurgical Academy of Ukraine
Profile/Expertise: see attachment


ID: PO-14-ES-1093
Date: 10.02.2014
Topic:
NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs

NMP 33 - 2014:
The Materials "Common House"
Institution: INESFLY CORPORATION S.L.
Profile/Expertise: see attachment


ID: PO-14-IT-1092
Date: 08.02.2014
Topic:
NMP 35 - 2014:
Business models with new supply chains for sustainable customer-driven small series production

FoF 14 - 2015:
Integrated design and management of production machinery and processes

FoF 1 - 2014:
Process optimisation of manufacturing assets
Institution: Department of Industrial Engineering and Mathematical Science
Profile/Expertise: see attachment


ID: PO-14-ES-1091
Date: 07.02.2014
Topic:
NMP 10 - 2014:
Biomaterials for the treatment of Diabetes Mellitus

BIOTEC 3 - 2014:
Widening industrial application of enzymatic processes

BIOTEC 4 - 2014:
Downstream processes unlocking biotechnological transformations
Institution: CEMITEC
Profile/Expertise: see attachment


ID: PS-14-IE-1090
Date: 06.02.2014
Topic:
NMP 35 - 2014:
Business models with new supply chains for sustainable customer-driven small series production

FoF 13 - 2015:
Re-use and re-manufacturing technologies and equipment for sustainable product life cycle management
Institution: Prolimax Limited
Profile/Expertise: see attachment


ID: PO-14-DE-1084
Date: 05.02.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications
Institution: Prüf- und Forschungsinstitut Pirmasens e.V.
Profile/Expertise: see attachment


ID: PS-14-IE-1081
Date: 31.01.2014
Topic:
FoF 2 - 2014:
Manufacturing processes for complex structures and geometries with efficient use of material
Institution: T.E. Laboratories Ltd.
Profile/Expertise: see attachment


ID: PO-14-HR-1080
Date: 31.01.2014
Topic:
FoF 4 - 2014:
Developing smart factories that are attractive to workers

FoF 5 - 2014:
Innovative product-service design using manufacturing intelligence

FoF 6 - 2014:
Symbiotic human-robot collaborations for safe and dynamic multimodal manufacturing systems
Institution: Harburg-Freudenberger Beli¨ce d.o.o.
Profile/Expertise: see attachment


ID: PO-14-HR-1079
Date: 31.01.2014
Topic:
FoF 4 - 2014:
Developing smart factories that are attractive to workers

SPIRE 1 - 2014:
Integrated Process Control

FoF 1 - 2014:
Process optimisation of manufacturing assets
Institution: Harburg-Freudenberger Beli¨ce d.o.o.
Profile/Expertise: see attachment


ID: PO-14-IT-1078
Date: 30.01.2014
Topic:
NMP 1 - 2014:
Open access pilot lines for cost effective nanocomposites

NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs
Institution: EPoS srl
Profile/Expertise: see attachment


ID: PO-14-TR-1077
Date: 27.01.2014
Topic:
FETOPEN 1 - 2014/2015:
FET-Open research projects

FETOPEN 2 - 2014:
Coordination and Support Activities 2014
Institution: Istanbul Technical University
Profile/Expertise: see attachment


ID: PO-14-ES-1075
Date: 21.01.2014
Topic:
NMP 1 - 2014:
Open access pilot lines for cost effective nanocomposites

NMP 4 - 2014:
High definition printing of multifunctional materials

NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications
Institution: Leitat Technological Center
Profile/Expertise: see attachment


ID: PO-14-IT-1074
Date: 21.01.2014
Topic:
NMP 1 - 2014:
Open access pilot lines for cost effective nanocomposites

NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs

SPIRE 3 - 2014:
Improved downstream processing of mixtures in process industries
Institution: Speed R&D Srl
Profile/Expertise: see attachment


ID: PO-14-ES-1073
Date: 20.01.2014
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: IK4-TEKNIKER
Profile/Expertise: see attachment


ID: PO-14-GB-1072
Date: 20.01.2014
Topic:
NMP 9 - 2014:
Networking of SMEs in the nano-biomedical sector

NMP 36 - 2014:
Facilitating knowledge management, networking and coordination in NMP

FETOPEN 2 - 2014:
Coordination and Support Activities 2014
Institution: nanoIT
Profile/Expertise: see attachment


ID: PO-14-IT-1071
Date: 19.01.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

EeB 1 - 2014:
Materials for building envelope

EeB 2 - 2014:
Adaptable envelopes integrated in building refurbishment projects
Institution: Università Politecnica della Marche - Department SIMAU
Profile/Expertise: see attachment


ID: PO-14-AT-1069
Date: 17.01.2014
Topic:
FoF 4 - 2014:
Developing smart factories that are attractive to workers

EeB 2 - 2014:
Adaptable envelopes integrated in building refurbishment projects

EeB 5 - 2015:
Innovative design tools for refurbishment at building and district level
Institution: Bartenbach GmbH
Profile/Expertise: see attachment


ID: PO-14-AT-1068
Date: 17.01.2014
Topic:
FoF 4 - 2014:
Developing smart factories that are attractive to workers

FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies

FoF 11 - 2015:
Flexible production systems based on integrated tools for rapid reconfiguration of machinery and robots
Institution: Vienna University of Technology
Profile/Expertise: see attachment


ID: PO-14-PT-1066
Date: 16.01.2014
Topic:
EEB-05-2017:
Development of near zero energy building renovation

EEB-07-2017:
Integration of energy harvesting at building and district level

NMBP-13-2017:
Cross-cutting KETs for diagnostics at the point-of-care
Institution: Department of Chemical Engineering - University of Coimbra
Profile/Expertise: see attachment


ID: PO-14-ES-1065
Date: 15.01.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules

NMP 21 - 2014:
Materials-based solutions for the protection or preservation of European cultural heritage

EeB 1 - 2014:
Materials for building envelope
Institution: Inst. Ciencia de Materiales de Madrid-ICMM. CSIC
Profile/Expertise: see attachment


ID: PO-14-IE-1064
Date: 15.01.2014
Topic:
NMP 7 - 2015:
Additive manufacturing for tabletop nanofactories

NMP 8 - 2014:
Scale-up of nanopharmaceuticals production

NMP 11 - 2015:
Nanomedicine therapy for cancer
Institution: Glantreo Ltd
Profile/Expertise: see attachment


ID: PO-14-ES-1063
Date: 15.01.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 25 - 2014/2015:
Accelerating industrial uptake of nanotechnologies, advanced materials and advanced manufacturing and processing technologies by SMEs

BIOTEC 3 - 2014:
Widening industrial application of enzymatic processes
Institution: Linpac Packaging Pravia SAU
Profile/Expertise: see attachment


ID: PO-14-SI-1062
Date: 14.01.2014
Topic:
NMP 10 - 2014:
Biomaterials for the treatment of Diabetes Mellitus

NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 28 - 2014:
Assessment of environmental fate of nanomaterials
Institution: Institute of Microbial Sciences and Technologies
Profile/Expertise: see attachment


ID: PO-14-SI-1061
Date: 14.01.2014
Topic:
FoF 8 - 2015:
ICT-enabled modelling, simulation, analytics and forecasting technologies

BIOTEC 2 - 2015:
New bioinformatics approaches in service of biotechnology

BIOTEC 6 - 2015:
Metagenomics as innovation driver
Institution: Institute for Metagenomics and Microbial Technologies
Profile/Expertise: see attachment


ID: PO-14-SI-1060
Date: 14.01.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules

BIOTEC 6 - 2015:
Metagenomics as innovation driver

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Institite of Metagenomics and Microbial Technologies
Profile/Expertise: see attachment


ID: PO-14-ES-1059
Date: 14.01.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules

NMP 22 - 2015:
Fibre-based materials for non-clothing applications

BIOTEC 1 - 2014:
Synthetic biology - construction of organisms for new products and processes
Institution: Technical Proteins Nanobiotechnology, SL
Profile/Expertise: see attachment


ID: PO-14-PL-1058
Date: 14.01.2014
Topic:
NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 7 - 2015:
Additive manufacturing for tabletop nanofactories

SPIRE 7 - 2015:
Recovery technologies for metals and other minerals
Institution: Warsaw University of Technology, Faculty of Materials Science and Engineering
Profile/Expertise: see attachment


ID: PO-14-IT-1056
Date: 13.01.2014
Topic:
EeB 6 - 2015:
Integrated solutions of thermal energy storage for building applications

EeB 7 - 2015:
New tools and methodologies to reduce the gap between predicted and actual energy performances at the level of buildings and blocks of buildings

EeB 8 - 2015:
Integrated approach to retrofitting of residential buildings
Institution: University IUAV of Venice
Profile/Expertise: see attachment


ID: PO-14-IT-1054
Date: 13.01.2014
Topic:
EeB 1 - 2014:
Materials for building envelope

EeB 2 - 2014:
Adaptable envelopes integrated in building refurbishment projects

EeB 3 - 2014:
Development of new self-inspection techniques and quality check measures for efficient construction processes
Institution: University IUAV of Venice
Profile/Expertise: see attachment


ID: PO-14-IT-1053
Date: 13.01.2014
Topic:
NMP 1 - 2014:
Open access pilot lines for cost effective nanocomposites

NMP 7 - 2015:
Additive manufacturing for tabletop nanofactories

SPIRE 3 - 2014:
Improved downstream processing of mixtures in process industries
Institution: ICMA SAN GIORGIO SPA
Profile/Expertise: see attachment


ID: PO-14-DE-1052
Date: 12.01.2014
Topic:
NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 35 - 2014:
Business models with new supply chains for sustainable customer-driven small series production

EeB 2 - 2014:
Adaptable envelopes integrated in building refurbishment projects
Institution: calligen
Profile/Expertise: see attachment


ID: PO-14-ES-1051
Date: 10.01.2014
Topic:
NMP 1 - 2014:
Open access pilot lines for cost effective nanocomposites

NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines
Institution: Instituto Tecnologico de Aragon
Profile/Expertise: see attachment


ID: PO-14-GB-1050
Date: 10.01.2014
Topic:
FoF 2 - 2014:
Manufacturing processes for complex structures and geometries with efficient use of material

NMP 23 - 2015:
Novel materials by design for substituting critical materials

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: University of Sunderland
Profile/Expertise: see attachment


ID: PO-14-AT-1048
Date: 09.01.2014
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules

BIOTEC 6 - 2015:
Metagenomics as innovation driver
Institution: AIT Austrian Institute of Technology
Profile/Expertise: see attachment


ID: PO-14-ES-1047
Date: 09.01.2014
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Consejo Superior de Investigaciones Cientificas (CSIC)
Profile/Expertise: see attachment


ID: PO-14-FR-1046
Date: 06.01.2014
Topic:
NMP 27 - 2014:
Coordination of EU and international efforts in safety of nanotechnology

NMP 30 - 2015:
Next generation tools for risk governance of nanomaterials

SPIRE 8 - 2015:
Solids handling for intensivied process technology
Institution: LRGP - CNRS - University of Lorraine
Profile/Expertise: see attachment


ID: PO-14-AT-1045
Date: 02.01.2014
Topic:
NMP 13 - 2014:
Storage of energy produced by decentralised sources

SPIRE 4 - 2014:
Methodologies, tools and indicators for cross-sectorial sustainability assessment of energy and resource efficient solutions in the process industry

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: STUDIA - Study centre for international analysis
Profile/Expertise: see attachment


ID: PO-13-CN-1043
Date: 30.12.2013
Topic:
FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: University of Michigan - Shanghai Jiao Tong University Joint Institute
Profile/Expertise: see attachment


ID: PO-13-GE-1042
Date: 29.12.2013
Topic:
NMP 14 - 2015:
ERA-NET on Materials for Energy

NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Ilia State University
Profile/Expertise: see attachment


ID: PO-13-UA-1041
Date: 24.12.2013
Topic:
NMP 13 - 2014:
Storage of energy produced by decentralised sources

NMP 14 - 2015:
ERA-NET on Materials for Energy

NMP 16 - 2015:
Extended in-service life of advanced functional materials in energy technologies (capture, conversion, storage and/or transmission of energy)
Institution: National science center Kharkov Institute of Physics and Technology
Profile/Expertise: see attachment


ID: PO-13-NL-1038
Date: 17.12.2013
Topic:
SPIRE 7 - 2015:
Recovery technologies for metals and other minerals

FoF 9 - 2015:
ICT Innovation for Manufacturing SMEs (I4MS)

FoF 13 - 2015:
Re-use and re-manufacturing technologies and equipment for sustainable product life cycle management
Institution: Maturus Optimi industrial consulting
Profile/Expertise: see attachment


ID: PO-13-NL-1037
Date: 17.12.2013
Topic:
SPIRE 2 - 2014:
Adaptable industrial processes allowing the use of renewables as flexible feedstock for chemical and energy applications

SPIRE 6 - 2015:
Energy and resource management systems for improved efficiency in the process industries

FETOPEN 3 - 2015:
Coordination and Support Activities 2015
Institution: Maturus Optimi industrial consulting
Profile/Expertise: see attachment


ID: PO-13-NL-1036
Date: 17.12.2013
Topic:
SPIRE 3 - 2014:
Improved downstream processing of mixtures in process industries

FETOPEN 2 - 2014:
Coordination and Support Activities 2014

BIOTEC 5 - 2015:
SME-boosting biotechnology-based industrial processes driving competitiveness and sustainability
Institution: Maturus Optimi industrial consulting
Profile/Expertise: see attachment


ID: PO-13-NL-1035
Date: 17.12.2013
Topic:
SPIRE 2 - 2014:
Adaptable industrial processes allowing the use of renewables as flexible feedstock for chemical and energy applications

BIOTEC 4 - 2014:
Downstream processes unlocking biotechnological transformations

FETOPEN 1 - 2014/2015:
FET-Open research projects
Institution: Maturus Optimi industrial consulting
Profile/Expertise: see attachment


ID: PO-13-DE-1033
Date: 13.12.2013
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

NMP 24 - 2015:
Low-energy solutions for drinking water production

NMP 30 - 2015:
Next generation tools for risk governance of nanomaterials
Institution: BASF SE
Profile/Expertise: see attachment


ID: PO-13-ES-1031
Date: 13.12.2013
Topic:
NMP 1 - 2014:
Open access pilot lines for cost effective nanocomposites

NMP 22 - 2015:
Fibre-based materials for non-clothing applications

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: Carbon Materials Group at INCAR, Spanish Research Council (CSIC)
Profile/Expertise: see attachment


ID: PO-13-ES-1030
Date: 13.12.2013
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications

NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: Carbon Materials Group at INCAR, Spanish Research Council (CSIC)
Profile/Expertise: see attachment


ID: PO-13-ES-1029
Date: 12.12.2013
Topic:
FoF 3 - 2014:
Global energy and other resources efficiency in manufacturing enterprises

SPIRE 1 - 2014:
Integrated Process Control

BIOTEC 5 - 2015:
SME-boosting biotechnology-based industrial processes driving competitiveness and sustainability
Institution: IDENER
Profile/Expertise: see attachment


ID: PO-13-FR-1028
Date: 12.12.2013
Topic:
NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment
Institution: Laboratory of Chemistry and Biology of Metals
Profile/Expertise: see attachment


ID: PO-13-GB-1025
Date: 11.12.2013
Topic:
NMP 28 - 2014:
Assessment of environmental fate of nanomaterials
Institution: University of Essex
Profile/Expertise: see attachment


ID: PO-13-DE-1024
Date: 11.12.2013
Topic:
NMP 13 - 2014:
Storage of energy produced by decentralised sources

NMP 17 - 2014:
Post-lithium ion batteries for electric automotive applications

NMP 23 - 2015:
Novel materials by design for substituting critical materials
Institution: CreativeQuantum GmbH
Profile/Expertise: see attachment


ID: PO-13-DE-1022
Date: 10.12.2013
Topic:
NMP 18 - 2014:
Materials solutions for use in the creative industry sector

EeB 1 - 2014:
Materials for building envelope

EeB 8 - 2015:
Integrated approach to retrofitting of residential buildings
Institution: Fraunhofer WKI, Dept. Material Analysis and Indoor Chemistry
Profile/Expertise: see attachment


ID: PO-13-DE-1021
Date: 09.12.2013
Topic:
NMP 4 - 2014:
High definition printing of multifunctional materials

FoF 2 - 2014:
Manufacturing processes for complex structures and geometries with efficient use of material

FoF 1 - 2014:
Process optimisation of manufacturing assets
Institution: SITEC Industrietechnologie GmbH
Profile/Expertise: see attachment


ID: PO-13-GB-1018
Date: 29.11.2013
Topic:
NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications

NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment
Institution: Institute of Occupational Medicine (IOM)
Profile/Expertise: see attachment


ID: PO-13-ES-1013
Date: 23.10.2013
Topic:
M-ERA.NET 2013-1:
Composite Technology
Institution: Koniker S.Coop
Profile/Expertise: see attachment


ID: PS-13-RU-1010
Date: 09.10.2013
Topic:
M-ERA.NET 2013-4:
Materials for Health
Institution: BIOPHARMOS Co. Ltd.
Profile/Expertise: see attachment


ID: PS-13-RU-1009
Date: 09.10.2013
Topic:
M-ERA.NET 2013-4:
Materials for Health
Institution: BIOPHARMOS Co. Ltd.
Profile/Expertise: see attachment


ID: PS-13-ES-1008
Date: 07.10.2013
Topic:
M-ERA.NET 2013-1:
Composite Technology
Institution: Andalusian Institute of Technology
Profile/Expertise: see attachment


ID: PS-13-DE-1007
Date: 02.10.2013
Topic:
SIINN 2013-1:
Over-arching aspects of nanosafety research
Institution: KIT, ITAS
Profile/Expertise: see attachment


ID: PO-13-DE-1001
Date: 06.09.2013
Topic:
SIINN 2013-1:
Over-arching aspects of nanosafety research

SIINN 2013-3:
Toxicity mechanisms

SIINN 2013-5:
Effects of MNMs on human health
Institution: University Leipzig, Institute of Medical Physics and Biophysics
Profile/Expertise: see attachment


ID: PO-13-IT-1000
Date: 02.09.2013
Topic:
M-ERA.NET 2013-1:
Composite Technology

M-ERA.NET 2013-2:
Design of New Interfaces, Surfaces and Coatings

M-ERA.NET 2013-5:
Materials for Sustainable and Affordable Low Carbon Energy Technologies
Institution: University of Padova
Profile/Expertise: see attachment


ID: PO-13-ES-997
Date: 29.08.2013
Topic:
M-ERA.NET 2013-2:
Design of New Interfaces, Surfaces and Coatings

M-ERA.NET 2013-4:
Materials for Health
Institution: IK4-TEKNIKER
Profile/Expertise: see attachment


ID: PO-13-SI-996
Date: 25.08.2013
Topic:
M-ERA.NET 2013-4:
Materials for Health
Institution: Faculty of Pharmacy, University of Ljubljana
Profile/Expertise: see attachment


ID: PO-13-ES-994
Date: 20.08.2013
Topic:
M-ERA.NET 2013-1:
Composite Technology
Institution: Danobat Fibra S.Coop.
Profile/Expertise: see attachment


ID: PO-13-DE-993
Date: 19.08.2013
Topic:
M-ERA.NET 2013-1:
Composite Technology

M-ERA.NET 2013-2:
Design of New Interfaces, Surfaces and Coatings

M-ERA.NET 2013-5:
Materials for Sustainable and Affordable Low Carbon Energy Technologies
Institution: TU Ilmenau - Institute for Materials Engineering and Institute of Micro- and Nanotechnologies MacroNano(R)
Profile/Expertise: see attachment


ID: PO-13-DE-989
Date: 02.08.2013
Topic:
NMP 29 - 2015:
Increasing the capacity to perform nano-safety assessment

NMP 30 - 2015:
Next generation tools for risk governance of nanomaterials

NMP 26 - 2014:
Joint EU & MS activity on the next phase of research in support of regulation “NANOREG II"
Institution: Fraunhofer Institute for Toxicology and Experimental Medicine - ITEM
Profile/Expertise: see attachment


ID: PO-13-PL-988
Date: 02.08.2013
Topic:
M-ERA.NET 2013-1:
Composite Technology

M-ERA.NET 2013-5:
Materials for Sustainable and Affordable Low Carbon Energy Technologies
Institution: Institute of Non-Ferrous Metals Division in Poznan
Profile/Expertise: see attachment


ID: PO-13-SI-987
Date: 01.08.2013
Topic:
M-ERA.NET 2013-4:
Materials for Health
Institution: Jozef Stefan Institute, Advanceed Materials Department
Profile/Expertise: see attachment


ID: PO-13-CH-984
Date: 25.07.2013
Topic:
M-ERA.NET 2013-2:
Design of New Interfaces, Surfaces and Coatings

M-ERA.NET 2013-4:
Materials for Health

M-ERA.NET 2013-5:
Materials for Sustainable and Affordable Low Carbon Energy Technologies
Institution: Zurich University of Applied Sciences
Profile/Expertise: see attachment


ID: PO-13-ES-983
Date: 18.07.2013
Topic:
M-ERA.NET 2013-1:
Composite Technology

M-ERA.NET 2013-2:
Design of New Interfaces, Surfaces and Coatings

M-ERA.NET 2013-3:
Integrated Computational Materials Engineering
Institution: Andaltec R&D+i Foundation
Profile/Expertise: see attachment


ID: PO-13-IL-982
Date: 17.07.2013
Topic:
M-ERA.NET 2013-2:
Design of New Interfaces, Surfaces and Coatings

M-ERA.NET 2013-4:
Materials for Health

M-ERA.NET 2013-5:
Materials for Sustainable and Affordable Low Carbon Energy Technologies
Institution: Technion
Profile/Expertise: see attachment


ID: PO-13-LV-981
Date: 16.07.2013
Topic:
M-ERA.NET 2013-1:
Composite Technology

M-ERA.NET 2013-2:
Design of New Interfaces, Surfaces and Coatings

M-ERA.NET 2013-3:
Integrated Computational Materials Engineering
Institution: Riga Technical University, Institute Materials and Structures
Profile/Expertise: see attachment


ID: PO-13-CH-980
Date: 16.07.2013
Topic:
M-ERA.NET 2013-4:
Materials for Health
Institution: University Hospital/Cranio-Maxillofacial and oral Surgery/Oral Biotechnology & Bioengineering
Profile/Expertise: see attachment


ID: PO-13-PL-979
Date: 15.07.2013
Topic:
M-ERA.NET 2013-1:
Composite Technology

M-ERA.NET 2013-3:
Integrated Computational Materials Engineering

M-ERA.NET 2013-4:
Materials for Health
Institution: Rzeszow University of Technology, Department of Manufacturing Techniques and Automation
Profile/Expertise: see attachment


ID: PO-13-DE-978
Date: 15.07.2013
Topic:
SIINN 2013-1:
Over-arching aspects of nanosafety research
Institution: Fraunhofer Institute for Laser Technology ILT
Profile/Expertise: see attachment


ID: PO-13-SK-974
Date: 15.04.2013
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL

NMP.2013.4.0-1:
Graphene production technologies - LARGE

OCEAN 2013.1:
Biosensors for real time monitoring of biohazard and man-made chemical contaminants in the marine environment
Institution: FEI STU
Profile/Expertise: see attachment


ID: PO-13-IT-972
Date: 25.01.2013
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL
Institution: University of Bologna
Profile/Expertise: see attachment


ID: PO-13-GB-971
Date: 24.01.2013
Topic:
NMP.2013.1.1-1:
Exploration, optimisation and control of nano-catalytic processes for energy applications - LARGE

NMP.2013.2.2-3:
Wide band gap semiconductor materials and structures for power electronics in energy technologies - LARGE

NMP.2013.4.0-2:
Innovative materials for efficient, stable and cheap organic photovoltaic cells - SMALL
Institution: University of Bristol
Profile/Expertise: see attachment


ID: PS-12-IL-969
Date: 27.11.2012
Topic:
FoF.NMP.2013-10:
Manufacturing processes for products made of composites or engineered metallic materials - SMALL
Institution: Technion - Israel Institute of Technology
Profile/Expertise: see attachment


ID: PO-12-ES-967
Date: 07.11.2012
Topic:
FoF.NMP.2013-3:
Workplaces of the future: the new people-centred production site - SMALL
Institution: AIN
Profile/Expertise: see attachment


ID: PS-12-IT-966
Date: 05.11.2012
Topic:
EeB.NMP.2013-1:
Nanotechnology for multifunctional lightweight construction materials and components - SMALL
Institution: Colorobbia Italia SpA
Profile/Expertise: see attachment


ID: PS-12-ES-965
Date: 31.10.2012
Topic:
FoF.NMP.2013-3:
Workplaces of the future: the new people-centred production site - SMALL
Institution: TECNOCREA
Profile/Expertise: see attachment


ID: PO-12-IE-963
Date: 26.10.2012
Topic:
FoF-NMP-2013-9:
Advanced concepts for technology-based business approaches addressing product-services and their manufacturing in globalised markets - SMALL
Institution: University of Limerick
Profile/Expertise: see attachment


ID: PS-12-PT-962
Date: 23.10.2012
Topic:
FoF.NMP.2013-3:
Workplaces of the future: the new people-centred production site - SMALL
Institution: IADIS - International Association for the Development of the Information Society - Associação
Profile/Expertise: see attachment


ID: PO-12-BG-961
Date: 20.10.2012
Topic:
NMP.2013.1.4-2:
Metrology research for the development and validation of design rules for engineering of nanostructured and nano-enabled materials and devices - LARGE

NMP.2013.4.0-3:
From research to innovation: substantial steps forward in the industrial use of European intellectual assets, stimulating the use of newly developed materials and materials technologies by the industry - SME

EeB.NMP.2013-6:
Achieving high efficiency by deep retrofitting in the case of commercial buildings - LARGE
Institution: Bulgarian Academy of Sciences / Institute of Mechanics / OLEM
Profile/Expertise: see attachment


ID: PS-12-ES-958
Date: 19.10.2012
Topic:
FoF.NMP.2013-6:
Mini-factories for customised products using local flexible production - DEMO
Institution: Instituto Andaluz de Tecnología - IAT (Andalusian Institute of Technology)
Profile/Expertise: see attachment


ID: PO-12-IT-955
Date: 18.10.2012
Topic:
EeB.NMP.2013-3:
Integration of technologies for energy-efficient solutions in the renovation of public buildings - DEMO

EeB.NMP.2013-4:
Integrated control systems and methodologies to monitor and improve building energy performance - LARGE

EeB.NMP.2013-5:
Optimised design methodologies for energy-efficient buildings integrated in the neighbourhood energy systems - LARGE
Institution: CETMA - Engineering, Design & Materials Technologies Centre
Profile/Expertise: see attachment


ID: PS-12-IE-953
Date: 15.10.2012
Topic:
NMP.2013.1.1-1:
Exploration, optimisation and control of nano-catalytic processes for energy applications - LARGE
Institution: University College Dublin
Profile/Expertise: see attachment


ID: PO-12-GB-952
Date: 12.10.2012
Topic:
OCEAN 2013.3:
Innovative antifouling materials for maritime applications

FoF.NMP.2013-10:
Manufacturing processes for products made of composites or engineered metallic materials - SMALL

FoF.NMP.2013-11:
Manufacturing of highly miniaturised components - SME
Institution: Cardiff University
Profile/Expertise: see attachment


ID: PO-12-IE-950
Date: 08.10.2012
Topic:
OCEAN 2013.3:
Innovative antifouling materials for maritime applications

FoF.NMP.2013-8:
Innovative strategies for renovation and repair in manufacturing systems - LARGE

M-ERA.NET 2012 - 03:
Design of new Interfaces, surfaces and coatings
Institution: University of Dublin, Trinity College, Mechanical and Manufacturing Engineering Department
Profile/Expertise: see attachment


ID: PO-12-HR-949
Date: 04.10.2012
Topic:
NMP.2013.4.0-2:
Innovative materials for efficient, stable and cheap organic photovoltaic cells - SMALL
Institution: Harburg-Freudenberger Beli¨ce d.o.o.
Profile/Expertise: see attachment


ID: PO-12-HR-948
Date: 04.10.2012
Topic:
FoF.NMP.2013-8:
Innovative strategies for renovation and repair in manufacturing systems - LARGE
Institution: Harburg-Freudenberger Beli¨ce d.o.o.
Profile/Expertise: see attachment


ID: PO-12-HR-947
Date: 04.10.2012
Topic:
FoF.NMP.2013-1:
Improved use of renewable resources at factory level - DEMO
Institution: Harburg-Freudenberger Beli¨ce d.o.o.
Profile/Expertise: see attachment


ID: PO-12-ES-944
Date: 01.10.2012
Topic:
NMP 20 - 2014:
Widening materials models

M-ERA.NET 1 - 2015:
Integrated Computational Materials Engineering

M-ERA.NET 6 - 2015:
Materials for Additive Manufacturing
Institution: IMDEA Materials Institute
Profile/Expertise: see attachment


ID: PO-12-AT-943
Date: 01.10.2012
Topic:
NMP.2013.3.0-1:
Tools for Monitoring and Assessing Resource-efficiency in the Value Chain of process Industries - SMALL

NMP.2013.3.0-2:
Integrated processing and Control Systems for Sustainable Production in Farms and Forests - SME

FoF.NMP.2013-5:
Innovative design of personalised product-services and of their production processes based on collaborative environments - LARGE
Institution: Logistikum Steyr- University of Applied Sciences Upper Austria
Profile/Expertise: see attachment


ID: PS-12-ES-941
Date: 28.09.2012
Topic:
NMP.2013.4.0-3:
From research to innovation: substantial steps forward in the industrial use of European intellectual assets, stimulating the use of newly developed materials and materials technologies by the industry - SME
Institution: IMDEA Materials Institute
Profile/Expertise: see attachment


ID: PS-12-NO-939
Date: 27.09.2012
Topic:
FoF.NMP.2013-5:
Innovative design of personalised product-services and of their production processes based on collaborative environments - LARGE
Institution: NTNU
Profile/Expertise: see attachment


ID: PO-12-ES-938
Date: 27.09.2012
Topic:
NMP.2013.1.1-1:
Exploration, optimisation and control of nano-catalytic processes for energy applications - LARGE

NMP.2013.2.1-1:
Developing new precursors, new processing routes and functionalisations for carbon fibres - LARGE

NMP.2013.2.2-4:
Materials solutions for durable energy-harvesters - SMALL
Institution: CIEMAT
Profile/Expertise: see attachment


ID: PO-12-NO-937
Date: 27.09.2012
Topic:
FoF.NMP.2013-5:
Innovative design of personalised product-services and of their production processes based on collaborative environments - LARGE
Institution: NTNU
Profile/Expertise: see attachment


ID: PO-12-DE-926
Date: 20.09.2012
Topic:
NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE

NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME

NMP.2013.2.2-2:
Biomaterials: Imaging and rapid precise prototyping technology for custom made scaffolds - coordinated call with China -SMALL
Institution: Leibniz-Institut für Polymerforschung Dresden e.V.
Profile/Expertise: see attachment


ID: PO-12-IT-925
Date: 19.09.2012
Topic:
NMP.2013.1.3-1:
Safety in nanoscale production and products - LARGE
Institution: ENEA
Profile/Expertise: see attachment


ID: PO-12-DE-923
Date: 17.09.2012
Topic:
NMP.2013.2.1-1:
Developing new precursors, new processing routes and functionalisations for carbon fibres - LARGE
Institution: Leibniz-Institut für Polymerforschung Dresden e.V.
Profile/Expertise: see attachment


ID: PO-12-CY-922
Date: 16.09.2012
Topic:
NMP.2013.1.3-2:
Nanomaterials safety assessment: Ontology, database(s) for modelling and risk assessment - SMALL
Institution: NovaMechanics Ltd
Profile/Expertise: see attachment


ID: PO-12-IE-920
Date: 14.09.2012
Topic:
NMP.2013.1.1-1:
Exploration, optimisation and control of nano-catalytic processes for energy applications - LARGE
Institution: University College Dublin
Profile/Expertise: see attachment


ID: PO-12-ES-917
Date: 13.09.2012
Topic:
NMP.2013.4.0-4:
Support for cluster activities of projects in the main application fields of NMP Theme - CSA

NMP.2013.4.0-8:
The impact of the integration of key enabling technologies on industrial production and societal goals - CSA

NMP.2013.4.1-1:
Development of new materials with a reduced critical metal content - coordinated call with Japan Science and Technology Agency - SMALL
Institution: Spanish Chemical Industry Federation
Profile/Expertise: see attachment


ID: PO-12-ES-916
Date: 13.09.2012
Topic:
NMP.2013.1.4-4:
Developing innovative outreach and dialogue on responsible nanotechnologies in EU civil society - CSA

NMP.2013.4.0-4:
Support for cluster activities of projects in the main application fields of NMP Theme - CSA

NMP.2013.4.0-5:
Deployment of societally beneficial nano- and/or materials technologies in ICP countries - CSA
Institution: Spanish Chemical Industry Federation
Profile/Expertise: see attachment


ID: PO-12-ES-915
Date: 13.09.2012
Topic:
NMP.2013.1.4-3:
Development of methods and standards supporting the implementation of the Commission recommendation for a definition of nanomaterial - LARGE

NMP.2013.2.3-1:
Advanced materials - our allies for a sustainable future - CSA

NMP.2013.3.0-1:
Tools for Monitoring and Assessing Resource-efficiency in the Value Chain of process Industries - SMALL
Institution: Spanish Chemical Industry Federation
Profile/Expertise: see attachment


ID: PS-12-ES-914
Date: 13.09.2012
Topic:
NMP.2013.4.0-5:
Deployment of societally beneficial nano- and/or materials technologies in ICP countries - CSA
Institution: Spanish Chemical Industry Federation
Profile/Expertise: see attachment


ID: PO-12-ES-913
Date: 13.09.2012
Topic:
NMP.2013.2.1-1:
Developing new precursors, new processing routes and functionalisations for carbon fibres - LARGE

OCEAN 2013.3:
Innovative antifouling materials for maritime applications

FoF.NMP.2013-10:
Manufacturing processes for products made of composites or engineered metallic materials - SMALL
Institution: Andaltec R&D+i Foundation
Profile/Expertise: see attachment


ID: PO-12-CZ-912
Date: 13.09.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL

NMP.2013.1.3-2:
Nanomaterials safety assessment: Ontology, database(s) for modelling and risk assessment - SMALL

NMP.2013.1.4-1:
Development of an integrated multi-scale modelling environment for nanomaterials and systems by design - SMALL
Institution: Evalion s.r.o.
Profile/Expertise: see attachment


ID: PS-12-DE-911
Date: 13.09.2012
Topic:
FoF.NMP.2013-1:
Improved use of renewable resources at factory level - DEMO
Institution: Institute Industrial IT - inIT
Profile/Expertise: see attachment


ID: PO-12-ES-909
Date: 12.09.2012
Topic:
NMP.2013.1.3-1:
Safety in nanoscale production and products - LARGE
Institution: Tecnalia
Profile/Expertise: see attachment


ID: PS-12-DE-906
Date: 11.09.2012
Topic:
NMP.2013.4.0-1:
Graphene production technologies - LARGE
Institution: Fraunhofer Research Institution for Organics, Materials and Electronic Devices Dresden
Profile/Expertise: see attachment


ID: PO-12-DE-905
Date: 07.09.2012
Topic:
NMP.2013.1.3-2:
Nanomaterials safety assessment: Ontology, database(s) for modelling and risk assessment - SMALL
Institution: Fraunhofer IGB
Profile/Expertise: see attachment


ID: PO-12-ES-903
Date: 06.09.2012
Topic:
NMP.2013.1.4-2:
Metrology research for the development and validation of design rules for engineering of nanostructured and nano-enabled materials and devices - LARGE
Institution: Red Aragon 7PM
Profile/Expertise: see attachment


ID: PO-12-FR-901
Date: 04.09.2012
Topic:
NMP.2013.4.0-1:
Graphene production technologies - LARGE
Institution: CEA, IRAMIS, SPEC, LEM
Profile/Expertise: see attachment


ID: PO-12-GB-900
Date: 04.09.2012
Topic:
NMP.2013.4.0-1:
Graphene production technologies - LARGE

NMP.2013.4.0-3:
From research to innovation: substantial steps forward in the industrial use of European intellectual assets, stimulating the use of newly developed materials and materials technologies by the industry - SME

FoF.NMP.2013-10:
Manufacturing processes for products made of composites or engineered metallic materials - SMALL
Institution: NetComposites Ltd
Profile/Expertise: see attachment


ID: PO-12-GB-899
Date: 04.09.2012
Topic:
NMP.2013.1.1-2:
Self-assembly of naturally occurring nanosystems - SMALL

NMP.2013.2.1-1:
Developing new precursors, new processing routes and functionalisations for carbon fibres - LARGE
Institution: NetComposites Ltd
Profile/Expertise: see attachment


ID: PO-12-IT-898
Date: 31.08.2012
Topic:
OCEAN 2013.3:
Innovative antifouling materials for maritime applications

EeB.NMP.2013-1:
Nanotechnology for multifunctional lightweight construction materials and components - SMALL
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-12-IT-897
Date: 31.08.2012
Topic:
FoF.NMP.2013-2:
Innovative re-use of modular equipment based on integrated factory design - DEMO

FoF.NMP.2013-6:
Mini-factories for customised products using local flexible production - DEMO
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-12-FR-896
Date: 31.08.2012
Topic:
FoF.NMP.2013-6:
Mini-factories for customised products using local flexible production - DEMO
Institution: Solvay-Rhodia
Profile/Expertise: see attachment


ID: PO-12-FR-895
Date: 31.08.2012
Topic:
NMP.2013.1.1-1:
Exploration, optimisation and control of nano-catalytic processes for energy applications - LARGE
Institution: Solvay-Rhodia
Profile/Expertise: see attachment


ID: PO-12-FR-894
Date: 31.08.2012
Topic:
NMP.2013.3.0-1:
Tools for Monitoring and Assessing Resource-efficiency in the Value Chain of process Industries - SMALL
Institution: Solvay-Rhodia
Profile/Expertise: see attachment


ID: PO-12-ES-893
Date: 30.08.2012
Topic:
NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME

NMP.2013.4.0-3:
From research to innovation: substantial steps forward in the industrial use of European intellectual assets, stimulating the use of newly developed materials and materials technologies by the industry - SME

NMP.2013.4.0-8:
The impact of the integration of key enabling technologies on industrial production and societal goals - CSA
Institution: GENERA BIOTECH SL
Profile/Expertise: see attachment


ID: PO-12-DE-892
Date: 30.08.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL
Institution: TU Bergakademie Freiberg
Profile/Expertise: see attachment


ID: PO-12-FR-888
Date: 28.08.2012
Topic:
NMP.2013.4.1-2:
Breakthrough Solutions for Mineral Extraction and Processing in Extreme Environments - LARGE
Institution: ACROTIR
Profile/Expertise: see attachment


ID: PS-12-IT-887
Date: 27.08.2012
Topic:
FoF.NMP.2013-10:
Manufacturing processes for products made of composites or engineered metallic materials - SMALL
Institution: University of Padova
Profile/Expertise: see attachment


ID: PO-12-HR-886
Date: 27.08.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL
Institution: KONCAR - Electrical Engineering Institute Inc.
Profile/Expertise: see attachment


ID: PS-12-FR-885
Date: 27.08.2012
Topic:
FoF.NMP.2013-10:
Manufacturing processes for products made of composites or engineered metallic materials - SMALL
Institution: FOREST LINE
Profile/Expertise: see attachment


ID: PO-12-DE-883
Date: 21.08.2012
Topic:
NMP.2013.4.0-2:
Innovative materials for efficient, stable and cheap organic photovoltaic cells - SMALL
Institution: FSU Jena
Profile/Expertise: see attachment


ID: PO-12-DE-882
Date: 21.08.2012
Topic:
FoF.NMP.2013-10:
Manufacturing processes for products made of composites or engineered metallic materials - SMALL
Institution: FSU Jena
Profile/Expertise: see attachment


ID: PO-12-DE-881
Date: 21.08.2012
Topic:
NMP.2013.2.2-2:
Biomaterials: Imaging and rapid precise prototyping technology for custom made scaffolds - coordinated call with China -SMALL
Institution: FSU Jena
Profile/Expertise: see attachment


ID: PO-12-DE-880
Date: 21.08.2012
Topic:
NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME
Institution: FSU Jena
Profile/Expertise: see attachment


ID: PO-12-DE-879
Date: 21.08.2012
Topic:
NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE
Institution: FSU Jena
Profile/Expertise: see attachment


ID: PO-12-DE-878
Date: 21.08.2012
Topic:
NMP.2013.1.1-2:
Self-assembly of naturally occurring nanosystems - SMALL
Institution: FSU Jena
Profile/Expertise: see attachment


ID: PO-12-DE-877
Date: 20.08.2012
Topic:
FoF.NMP.2013-6:
Mini-factories for customised products using local flexible production - DEMO

FoF.NMP.2013-11:
Manufacturing of highly miniaturised components - SME
Institution: Fraunhofer Institute for Productions Technology
Profile/Expertise: see attachment


ID: PO-12-TR-876
Date: 16.08.2012
Topic:
NMP 6 - 2015:
Novel nanomatrices and nanocapsules

NMP 11 - 2015:
Nanomedicine therapy for cancer

NMP 12 - 2015:
Biomaterials for treatment and prevention of Alzheimer’s disease
Institution: Selcuk University Metallurgy and MAterials Engineering
Profile/Expertise: see attachment


ID: PO-12-TR-872
Date: 16.08.2012
Topic:
NMP.2013.1.3-3:
Development of a systematic framework for naming and assessing safety of the next generations of nanomaterials being developed for industrial applications - LARGE

NMP.2013.4.0-1:
Graphene production technologies - LARGE

NMP.2013.4.0-2:
Innovative materials for efficient, stable and cheap organic photovoltaic cells - SMALL
Institution: Selcuk University Advanced Technology Research&Application Center (Selcuk ILTEK)
Profile/Expertise: see attachment


ID: PS-12-CH-871
Date: 14.08.2012
Topic:
NMP.2013.2.2-2:
Biomaterials: Imaging and rapid precise prototyping technology for custom made scaffolds - coordinated call with China -SMALL
Institution: University of applied Sciences - School of Life Sciences
Profile/Expertise: see attachment


ID: PO-12-GB-870
Date: 14.08.2012
Topic:
NMP.2013.1.1-2:
Self-assembly of naturally occurring nanosystems - SMALL

NMP.2013.2.2-4:
Materials solutions for durable energy-harvesters - SMALL

NMP.2013.4.0-2:
Innovative materials for efficient, stable and cheap organic photovoltaic cells - SMALL
Institution: University of Surrey
Profile/Expertise: see attachment


ID: PO-12-TR-869
Date: 14.08.2012
Topic:
NMP 1 - 2014:
Open access pilot lines for cost effective nanocomposites

NMP 2 - 2015:
Integration of novel nano materials into existing production and assembly lines

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: Selcuk University Metallurgy and MAterials Engineering
Profile/Expertise: see attachment


ID: PO-12-DE-868
Date: 13.08.2012
Topic:
FoF.NMP.2013-2:
Innovative re-use of modular equipment based on integrated factory design - DEMO

FoF.NMP.2013-3:
Workplaces of the future: the new people-centred production site - SMALL

FoF.NMP.2013-7:
New hybrid production systems in advanced factory environments based on new human-robot interactive cooperation -LARGE
Institution: ZeMA GmbH
Profile/Expertise: see attachment


ID: PO-12-DE-865
Date: 09.08.2012
Topic:
NMP.2013.2.3-1:
Advanced materials - our allies for a sustainable future - CSA
Institution: BIOKON e.V.
Profile/Expertise: see attachment


ID: PS-12-IE-862
Date: 09.08.2012
Topic:
NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE

NMP.2013.2.1-1:
Developing new precursors, new processing routes and functionalisations for carbon fibres - LARGE

NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME
Institution: Athlone Institute of Technology
Profile/Expertise: see attachment


ID: PO-12-CZ-861
Date: 08.08.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL

NMP.2013.4.0-7:
ERA-NET to support Innovation in the NMP thematic area - CSA

NMP.2013.4.1-1:
Development of new materials with a reduced critical metal content - coordinated call with Japan Science and Technology Agency - SMALL
Institution: Azacycles s.r.o. & Therapharm, a.s.
Profile/Expertise: see attachment


ID: PO-12-CZ-860
Date: 08.08.2012
Topic:
NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE

NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME

GC.NMP.2013-1:
Improved materials for innovative ageing resistant batteries - LARGE
Institution: Azacycles s.r.o. & Therapharm, a.s.
Profile/Expertise: see attachment


ID: PS-12-CZ-858
Date: 07.08.2012
Topic:
NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE
Institution: Azacycles s.r.o. & Therapharm, a.s.
Profile/Expertise: see attachment


ID: PO-12-ES-856
Date: 07.08.2012
Topic:
FoF.NMP.2013-6:
Mini-factories for customised products using local flexible production - DEMO

FoF-NMP-2013-9:
Advanced concepts for technology-based business approaches addressing product-services and their manufacturing in globalised markets - SMALL

FoF.NMP.2013-11:
Manufacturing of highly miniaturised components - SME
Institution: Integrasys S.A.
Profile/Expertise: see attachment


ID: PO-12-ES-855
Date: 07.08.2012
Topic:
FoF.NMP.2013-5:
Innovative design of personalised product-services and of their production processes based on collaborative environments - LARGE

FoF.NMP.2013-7:
New hybrid production systems in advanced factory environments based on new human-robot interactive cooperation -LARGE

FoF.NMP.2013-8:
Innovative strategies for renovation and repair in manufacturing systems - LARGE
Institution: Integrasys S.A.
Profile/Expertise: see attachment


ID: PO-12-ES-854
Date: 07.08.2012
Topic:
OCEAN 2013.1:
Biosensors for real time monitoring of biohazard and man-made chemical contaminants in the marine environment

OCEAN 2013.2:
Innovative multifunctional sensors for in-situ monitoring of marine environment and related maritime activities

OCEAN 2013.3:
Innovative antifouling materials for maritime applications
Institution: Integrasys S.A.
Profile/Expertise: see attachment


ID: PS-12-TR-853
Date: 07.08.2012
Topic:
NMP.2013.1.1-2:
Self-assembly of naturally occurring nanosystems - SMALL
Institution: TUBITAK Marmara Research Center
Profile/Expertise: see attachment


ID: PO-12-GR-852
Date: 06.08.2012
Topic:
NMP.2013.1.1-2:
Self-assembly of naturally occurring nanosystems - SMALL

NMP.2013.2.1-1:
Developing new precursors, new processing routes and functionalisations for carbon fibres - LARGE

NMP.2013.4.0-1:
Graphene production technologies - LARGE
Institution: NCSR Demokritos
Profile/Expertise: see attachment


ID: PS-12-DE-851
Date: 06.08.2012
Topic:
NMP.2013.2.1-1:
Developing new precursors, new processing routes and functionalisations for carbon fibres - LARGE
Institution: TU Chemnitz
Profile/Expertise: see attachment


ID: PO-12-IE-846
Date: 03.08.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL

OCEAN 2013.1:
Biosensors for real time monitoring of biohazard and man-made chemical contaminants in the marine environment

FoF.NMP.2013-11:
Manufacturing of highly miniaturised components - SME
Institution: Dublin City University
Profile/Expertise: see attachment


ID: PS-12-DE-845
Date: 03.08.2012
Topic:
NMP.2013.2.1-1:
Developing new precursors, new processing routes and functionalisations for carbon fibres - LARGE
Institution: Fraunhofer IWS
Profile/Expertise: see attachment


ID: PO-12-SI-844
Date: 03.08.2012
Topic:
NMP.2013.4.0-4:
Support for cluster activities of projects in the main application fields of NMP Theme - CSA

FoF.NMP.2013-5:
Innovative design of personalised product-services and of their production processes based on collaborative environments - LARGE

FoF-NMP-2013-9:
Advanced concepts for technology-based business approaches addressing product-services and their manufacturing in globalised markets - SMALL
Institution: TCS-Toolmakers Cluster of Slovenia
Profile/Expertise: see attachment


ID: PS-12-ES-843
Date: 02.08.2012
Topic:
FoF.NMP.2013-6:
Mini-factories for customised products using local flexible production - DEMO
Institution: Redfluid SL
Profile/Expertise: see attachment


ID: PS-12-ES-841
Date: 02.08.2012
Topic:
NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME
Institution: Histocell
Profile/Expertise: see attachment


ID: PO-12-DE-839
Date: 02.08.2012
Topic:
NMP.2013.1.3-2:
Nanomaterials safety assessment: Ontology, database(s) for modelling and risk assessment - SMALL
Institution: Fraunhofer Manufacturing Engineering and Automation IPA
Profile/Expertise: see attachment


ID: PO-12-FR-836
Date: 02.08.2012
Topic:
EeB.NMP.2013-2:
Safe, energy-efficient and affordable eco-innovative materials for building envelopes and/or partitions to provide a healthier indoor environment - LARGE

EeB.NMP.2013-3:
Integration of technologies for energy-efficient solutions in the renovation of public buildings - DEMO
Institution: University of Picardie Jules Verne - IMaP-research unit EPROAD (EA 4669)
Profile/Expertise: see attachment


ID: PO-12-SK-835
Date: 26.07.2012
Topic:
NMP.2013.1.1-2:
Self-assembly of naturally occurring nanosystems - SMALL

NMP.2013.2.2-4:
Materials solutions for durable energy-harvesters - SMALL

NMP.2013.4.0-2:
Innovative materials for efficient, stable and cheap organic photovoltaic cells - SMALL
Institution: Institute of Physics Slovak Academy of Sciences
Profile/Expertise: see attachment


ID: PO-12-SK-834
Date: 26.07.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL

NMP.2013.1.4-2:
Metrology research for the development and validation of design rules for engineering of nanostructured and nano-enabled materials and devices - LARGE

NMP.2013.1.4-3:
Development of methods and standards supporting the implementation of the Commission recommendation for a definition of nanomaterial - LARGE
Institution: Institute of Physics Slovak Academy of Sciences
Profile/Expertise: see attachment


ID: PO-12-ES-833
Date: 26.07.2012
Topic:
FoF.NMP.2013-1:
Improved use of renewable resources at factory level - DEMO

FoF.NMP.2013-3:
Workplaces of the future: the new people-centred production site - SMALL

FoF.NMP.2013-6:
Mini-factories for customised products using local flexible production - DEMO
Institution: Redfluid SL
Profile/Expertise: see attachment


ID: PO-12-FR-832
Date: 25.07.2012
Topic:
NMP.2013.2.3-1:
Advanced materials - our allies for a sustainable future - CSA

NMP.2013.4.0-3:
From research to innovation: substantial steps forward in the industrial use of European intellectual assets, stimulating the use of newly developed materials and materials technologies by the industry - SME

FoF.NMP.2013-1:
Improved use of renewable resources at factory level - DEMO
Institution: Societe Francaise de Ceramique (SFC)
Profile/Expertise: see attachment


ID: PO-12-DE-831
Date: 25.07.2012
Topic:
NMP.2013.1.4-2:
Metrology research for the development and validation of design rules for engineering of nanostructured and nano-enabled materials and devices - LARGE
Institution: Weierstrass Institute for Applied Analysis and Stochastics (WIAS)
Profile/Expertise: see attachment


ID: PO-12-FR-830
Date: 25.07.2012
Topic:
NMP.2013.1.1-1:
Exploration, optimisation and control of nano-catalytic processes for energy applications - LARGE

NMP.2013.2.1-1:
Developing new precursors, new processing routes and functionalisations for carbon fibres - LARGE

FoF.NMP.2013-6:
Mini-factories for customised products using local flexible production - DEMO
Institution: ARKEMA
Profile/Expertise: see attachment


ID: PO-12-FR-829
Date: 24.07.2012
Topic:
GC.NMP.2013-1:
Improved materials for innovative ageing resistant batteries - LARGE
Institution: Solvay-Rhodia
Profile/Expertise: see attachment


ID: PO-12-IT-828
Date: 24.07.2012
Topic:
NMP 7 - 2015:
Additive manufacturing for tabletop nanofactories

NMP 19 - 2015:
Materials for severe operating conditions, including added-value functionalities

NMP 3 - 2015:
Manufacturing and control of nanoporous materials
Institution: APEResearch srl
Profile/Expertise: see attachment


ID: PO-12-DE-826
Date: 23.07.2012
Topic:
NMP.2013.1.4-1:
Development of an integrated multi-scale modelling environment for nanomaterials and systems by design - SMALL

FoF.NMP.2013-10:
Manufacturing processes for products made of composites or engineered metallic materials - SMALL
Institution: Composite Engineering cCe
Profile/Expertise: see attachment


ID: PO-12-SK-825
Date: 23.07.2012
Topic:
NMP.2013.2.3-1:
Advanced materials - our allies for a sustainable future - CSA

NMP.2013.4.1-2:
Breakthrough Solutions for Mineral Extraction and Processing in Extreme Environments - LARGE
Institution: Institute of inorganic Chemistry, Slovak Academy of Sciences
Profile/Expertise: see attachment


ID: PO-12-ES-824
Date: 23.07.2012
Topic:
NMP.2013.1.1-2:
Self-assembly of naturally occurring nanosystems - SMALL

NMP.2013.4.0-1:
Graphene production technologies - LARGE
Institution: CIDETEC
Profile/Expertise: see attachment


ID: PO-12-DE-823
Date: 20.07.2012
Topic:
NMP.2013.1.3-1:
Safety in nanoscale production and products - LARGE
Institution: Fraunhofer Manufacturing Engineering and Automation IPA
Profile/Expertise: see attachment


ID: PO-12-IT-822
Date: 20.07.2012
Topic:
FoF.NMP.2013-8:
Innovative strategies for renovation and repair in manufacturing systems - LARGE
Institution: CRIT Research
Profile/Expertise: see attachment


ID: PO-12-ES-821
Date: 20.07.2012
Topic:
NMP.2013.1.1-1:
Exploration, optimisation and control of nano-catalytic processes for energy applications - LARGE

NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL
Institution: Instituto de Ciencia de Materiales de Madrid
Profile/Expertise: see attachment


ID: PO-12-IT-820
Date: 18.07.2012
Topic:
NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME
Institution: Institute of Clinical Physiology of National Research Council
Profile/Expertise: see attachment


ID: PO-12-CY-817
Date: 17.07.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL
Institution: The Cyprus Institute
Profile/Expertise: see attachment


ID: PO-12-FR-816
Date: 17.07.2012
Topic:
NMP.2013.1.1-1:
Exploration, optimisation and control of nano-catalytic processes for energy applications - LARGE

NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL

NMP.2013.4.1-1:
Development of new materials with a reduced critical metal content - coordinated call with Japan Science and Technology Agency - SMALL
Institution: CEA
Profile/Expertise: see attachment


ID: PO-12-DE-814
Date: 16.07.2012
Topic:
EeB.NMP.2013-2:
Safe, energy-efficient and affordable eco-innovative materials for building envelopes and/or partitions to provide a healthier indoor environment - LARGE
Institution: Fraunhofer Manufacturing Engineering and Automation IPA
Profile/Expertise: see attachment


ID: PO-12-FR-800
Date: 13.07.2012
Topic:
NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME

NMP.2013.4.0-2:
Innovative materials for efficient, stable and cheap organic photovoltaic cells - SMALL

OCEAN 2013.4:
Innovative transport and deployment systems for the offshore wind energy sector
Institution: TEXINOV
Profile/Expertise: see attachment


ID: PO-12-FR-776
Date: 06.07.2012
Topic:
NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME
Institution: NEURONAX
Profile/Expertise: see attachment


ID: PO-12-ES-775
Date: 05.07.2012
Topic:
NMP.2013.2.2-2:
Biomaterials: Imaging and rapid precise prototyping technology for custom made scaffolds - coordinated call with China -SMALL

FoF.NMP.2013-6:
Mini-factories for customised products using local flexible production - DEMO

FoF.NMP.2013-8:
Innovative strategies for renovation and repair in manufacturing systems - LARGE
Institution: GREP - Universitat de Girona
Profile/Expertise: see attachment


ID: PO-12-DE-772
Date: 04.07.2012
Topic:
NMP.2013.1.4-2:
Metrology research for the development and validation of design rules for engineering of nanostructured and nano-enabled materials and devices - LARGE

NMP.2013.1.4-3:
Development of methods and standards supporting the implementation of the Commission recommendation for a definition of nanomaterial - LARGE
Institution: BAM Federal Institute for Materials Research and Testing
Profile/Expertise: see attachment


ID: PS-12-IT-771
Date: 02.07.2012
Topic:
NMP.2013.4.0-3:
From research to innovation: substantial steps forward in the industrial use of European intellectual assets, stimulating the use of newly developed materials and materials technologies by the industry - SME
Institution: Bionica Tech s.r.l.
Profile/Expertise: see attachment


ID: PO-12-ES-769
Date: 28.06.2012
Topic:
NMP.2013.1.1-2:
Self-assembly of naturally occurring nanosystems - SMALL
Institution: Cidetec
Profile/Expertise: see attachment


ID: PO-12-GB-768
Date: 26.06.2012
Topic:
NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE
Institution: University College London
Profile/Expertise: see attachment


ID: PO-12-FR-767
Date: 26.06.2012
Topic:
NMP.2013.1.1-1:
Exploration, optimisation and control of nano-catalytic processes for energy applications - LARGE

NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL

NMP.2013.4.0-2:
Innovative materials for efficient, stable and cheap organic photovoltaic cells - SMALL
Institution: CEA
Profile/Expertise: see attachment


ID: PO-12-ES-766
Date: 26.06.2012
Topic:
NMP.2013.1.1-2:
Self-assembly of naturally occurring nanosystems - SMALL

NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE

NMP.2013.1.4-1:
Development of an integrated multi-scale modelling environment for nanomaterials and systems by design - SMALL
Institution: Bionanomechanics Lab
Profile/Expertise: see attachment


ID: PO-12-ES-765
Date: 26.06.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL

OCEAN 2013.1:
Biosensors for real time monitoring of biohazard and man-made chemical contaminants in the marine environment

:

Institution: Bionanomechanics Lab
Profile/Expertise: see attachment


ID: PO-12-FR-764
Date: 25.06.2012
Topic:
NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE

NMP.2013.1.3-2:
Nanomaterials safety assessment: Ontology, database(s) for modelling and risk assessment - SMALL

NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME
Institution: CYBERnano
Profile/Expertise: see attachment


ID: PO-12-IL-763
Date: 24.06.2012
Topic:
NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE

NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME

NMP.2013.2.2-2:
Biomaterials: Imaging and rapid precise prototyping technology for custom made scaffolds - coordinated call with China -SMALL
Institution: PolyPid Ltd.
Profile/Expertise: see attachment


ID: PO-12-FR-762
Date: 22.06.2012
Topic:
NMP.2013.1.1-2:
Self-assembly of naturally occurring nanosystems - SMALL

NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE
Institution: University of Lyon, IMP-UMR CNRS 5223
Profile/Expertise: see attachment


ID: PO-12-IT-761
Date: 22.06.2012
Topic:
OCEAN 2013.3:
Innovative antifouling materials for maritime applications
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-IT-760
Date: 22.06.2012
Topic:
NMP.2013.1.3-1:
Safety in nanoscale production and products - LARGE
Institution: Bionica Tech s.r.l.
Profile/Expertise: see attachment


ID: PO-12-IT-759
Date: 22.06.2012
Topic:
NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE
Institution: Bionica Tech s.r.l.
Profile/Expertise: see attachment


ID: PO-12-IT-758
Date: 22.06.2012
Topic:
NMP.2013.2.3-1:
Advanced materials - our allies for a sustainable future - CSA
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-IT-757
Date: 22.06.2012
Topic:
NMP.2013.2.2-2:
Biomaterials: Imaging and rapid precise prototyping technology for custom made scaffolds - coordinated call with China -SMALL
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-IT-756
Date: 22.06.2012
Topic:
NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-IT-755
Date: 22.06.2012
Topic:
NMP.2013.1.3-1:
Safety in nanoscale production and products - LARGE
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-IT-754
Date: 22.06.2012
Topic:
NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-IT-753
Date: 22.06.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-ES-752
Date: 22.06.2012
Topic:
EeB.NMP.2013-1:
Nanotechnology for multifunctional lightweight construction materials and components - SMALL
Institution: CIDETEC
Profile/Expertise: see attachment


ID: PO-12-ES-751
Date: 22.06.2012
Topic:
NMP.2013.2.1-1:
Developing new precursors, new processing routes and functionalisations for carbon fibres - LARGE

NMP.2013.2.2-4:
Materials solutions for durable energy-harvesters - SMALL

GC.NMP.2013-1:
Improved materials for innovative ageing resistant batteries - LARGE
Institution: IK4-CIDETEC
Profile/Expertise: see attachment


ID: PO-12-ES-749
Date: 21.06.2012
Topic:
OCEAN 2013.3:
Innovative antifouling materials for maritime applications
Institution: Cidetec
Profile/Expertise: see attachment


ID: PO-12-FR-747
Date: 19.06.2012
Topic:
EeB.NMP.2013-4:
Integrated control systems and methodologies to monitor and improve building energy performance - LARGE

EeB.NMP.2013-5:
Optimised design methodologies for energy-efficient buildings integrated in the neighbourhood energy systems - LARGE
Institution: LMS
Profile/Expertise: see attachment


ID: PO-12-IL-742
Date: 17.06.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL

NMP.2013.2.3-1:
Advanced materials - our allies for a sustainable future - CSA

NMP.2013.4.0-2:
Innovative materials for efficient, stable and cheap organic photovoltaic cells - SMALL
Institution: DAREN LABORATORIES & SCIENTIFIC CONSULTANTS LTD (DLAB)
Profile/Expertise: see attachment


ID: PO-12-LV-739
Date: 07.06.2012
Topic:
NMP.2013.1.4-2:
Metrology research for the development and validation of design rules for engineering of nanostructured and nano-enabled materials and devices - LARGE

NMP.2013.1.4-3:
Development of methods and standards supporting the implementation of the Commission recommendation for a definition of nanomaterial - LARGE
Institution: Riga Technical University, Institute of Mechanical Engineering
Profile/Expertise: see attachment


ID: PO-12-DE-738
Date: 07.06.2012
Topic:
FoF.NMP.2013-3:
Workplaces of the future: the new people-centred production site - SMALL

FoF.NMP.2013-4:
Innovative methodologies addressing social sustainability in manufacturing - CSA
Institution: TU Chemnitz, Professorship of Human Factors & Ergonomics
Profile/Expertise: see attachment


ID: PS-12-ES-737
Date: 05.06.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL
Institution: EMaS research Center . Rovira i Virgili University
Profile/Expertise: see attachment


ID: PO-12-IT-736
Date: 01.06.2012
Topic:
NMP.2013.2.2-4:
Materials solutions for durable energy-harvesters - SMALL
Institution: SENSOR Lab - University of Brescia & CNR-IDASC
Profile/Expertise: see attachment


ID: PO-12-IT-735
Date: 01.06.2012
Topic:
NMP.2013.1.1-1:
Exploration, optimisation and control of nano-catalytic processes for energy applications - LARGE

NMP.2013.2.1-1:
Developing new precursors, new processing routes and functionalisations for carbon fibres - LARGE

EeB.NMP.2013-6:
Achieving high efficiency by deep retrofitting in the case of commercial buildings - LARGE
Institution: University of Messina, Dept. Industrial Chemistry and Materials Engineering
Profile/Expertise: see attachment


ID: PS-12-TR-734
Date: 30.05.2012
Topic:
OCEAN 2013.1:
Biosensors for real time monitoring of biohazard and man-made chemical contaminants in the marine environment
Institution: TOBB University of Economics and Technol.
Profile/Expertise: see attachment


ID: PS-12-TR-733
Date: 30.05.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL
Institution: TOBB University of Economics and Technol.
Profile/Expertise: see attachment


ID: PO-12-TR-732
Date: 30.05.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL
Institution: TOBB University of Economics and Technol.
Profile/Expertise: see attachment


ID: PO-12-ES-731
Date: 30.05.2012
Topic:
EeB.NMP.2013-4:
Integrated control systems and methodologies to monitor and improve building energy performance - LARGE

EeB.NMP.2013-5:
Optimised design methodologies for energy-efficient buildings integrated in the neighbourhood energy systems - LARGE

EeB.NMP.2013-6:
Achieving high efficiency by deep retrofitting in the case of commercial buildings - LARGE
Institution: Catalonia Energy Efficiency Cluster (CEEC)
Profile/Expertise: see attachment


ID: PO-12-PL-730
Date: 29.05.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL

NMP.2013.2.2-3:
Wide band gap semiconductor materials and structures for power electronics in energy technologies - LARGE

NMP.2013.4.0-1:
Graphene production technologies - LARGE
Institution: Institute of Electron Technology
Profile/Expertise: see attachment


ID: PO-12-GB-729
Date: 25.05.2012
Topic:
:

Institution: NPL
Profile/Expertise: see attachment


ID: PO-12-IT-727
Date: 22.05.2012
Topic:
EeB.NMP.2013-1:
Nanotechnology for multifunctional lightweight construction materials and components - SMALL

EeB.NMP.2013-2:
Safe, energy-efficient and affordable eco-innovative materials for building envelopes and/or partitions to provide a healthier indoor environment - LARGE
Institution: SENSOR Lab - University of Brescia & CNR-IDASC
Profile/Expertise: see attachment


ID: PO-12-FI-726
Date: 22.05.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL

NMP.2013.2.2-4:
Materials solutions for durable energy-harvesters - SMALL

NMP.2013.4.1-1:
Development of new materials with a reduced critical metal content - coordinated call with Japan Science and Technology Agency - SMALL
Institution: University of Oulu
Profile/Expertise: see attachment


ID: PO-12-PL-724
Date: 22.05.2012
Topic:
FoF.NMP.2013-3:
Workplaces of the future: the new people-centred production site - SMALL

FoF.NMP.2013-4:
Innovative methodologies addressing social sustainability in manufacturing - CSA

FoF.NMP.2013-8:
Innovative strategies for renovation and repair in manufacturing systems - LARGE
Institution: Lean Enterprise Institute Poland
Profile/Expertise: see attachment


ID: PO-12-IT-723
Date: 22.05.2012
Topic:
NMP.2013.2.3-1:
Advanced materials - our allies for a sustainable future - CSA
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-CY-722
Date: 20.05.2012
Topic:
NMP.2013.3.0-2:
Integrated processing and Control Systems for Sustainable Production in Farms and Forests - SME

FoF.NMP.2013-3:
Workplaces of the future: the new people-centred production site - SMALL

FoF.NMP.2013-5:
Innovative design of personalised product-services and of their production processes based on collaborative environments - LARGE
Institution: Department of Computer Science, University of Cyprus
Profile/Expertise: see attachment


ID: PO-12-ES-721
Date: 19.05.2012
Topic:
NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE
Institution: Universidad Miguel Hernandez
Profile/Expertise: see attachment


ID: PO-12-DE-719
Date: 16.05.2012
Topic:
NMP.2013.3.0-1:
Tools for Monitoring and Assessing Resource-efficiency in the Value Chain of process Industries - SMALL

FoF.NMP.2013-1:
Improved use of renewable resources at factory level - DEMO
Institution: Chemnitz University of Technology
Profile/Expertise: see attachment


ID: PS-12-ES-718
Date: 16.05.2012
Topic:
OCEAN 2013.2:
Innovative multifunctional sensors for in-situ monitoring of marine environment and related maritime activities
Institution: MUFICATA SL RTD-IB engineering
Profile/Expertise: see attachment


ID: PS-12-ES-717
Date: 16.05.2012
Topic:
FoF.NMP.2013-8:
Innovative strategies for renovation and repair in manufacturing systems - LARGE
Institution: MUFICATA SL RTD-IB engineering
Profile/Expertise: see attachment


ID: PO-12-ES-716
Date: 16.05.2012
Topic:
OCEAN 2013.2:
Innovative multifunctional sensors for in-situ monitoring of marine environment and related maritime activities

FoF.NMP.2013-8:
Innovative strategies for renovation and repair in manufacturing systems - LARGE

EeB.NMP.2013-4:
Integrated control systems and methodologies to monitor and improve building energy performance - LARGE
Institution: MUFICATA SL RTD-IB engineering
Profile/Expertise: see attachment


ID: PO-12-IT-715
Date: 15.05.2012
Topic:
NMP.2013.4.0-3:
From research to innovation: substantial steps forward in the industrial use of European intellectual assets, stimulating the use of newly developed materials and materials technologies by the industry - SME
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-IT-714
Date: 15.05.2012
Topic:
FoF.NMP.2013-8:
Innovative strategies for renovation and repair in manufacturing systems - LARGE
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-IT-713
Date: 15.05.2012
Topic:
OCEAN 2013.3:
Innovative antifouling materials for maritime applications
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-IT-712
Date: 15.05.2012
Topic:
NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME

NMP.2013.2.2-2:
Biomaterials: Imaging and rapid precise prototyping technology for custom made scaffolds - coordinated call with China -SMALL
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-IT-711
Date: 15.05.2012
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL

NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE

NMP.2013.1.3-1:
Safety in nanoscale production and products - LARGE
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-IT-710
Date: 15.05.2012
Topic:
NMP.2013.1.4-1:
Development of an integrated multi-scale modelling environment for nanomaterials and systems by design - SMALL

NMP.2013.4.0-1:
Graphene production technologies - LARGE
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-IT-708
Date: 15.05.2012
Topic:
EeB.NMP.2013-3:
Integration of technologies for energy-efficient solutions in the renovation of public buildings - DEMO
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-IT-707
Date: 15.05.2012
Topic:
GC.NMP.2013-1:
Improved materials for innovative ageing resistant batteries - LARGE
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-12-ES-706
Date: 15.05.2012
Topic:
NMP.2013.2.2-1:
Biomaterials for Advanced Therapies and Medical Devices in the neurological/neuromuscular or cardiovascular fields - SME
Institution: University of Valencia
Profile/Expertise: see attachment


ID: PO-12-DE-705
Date: 15.05.2012
Topic:
NMP.2013.1.4-1:
Development of an integrated multi-scale modelling environment for nanomaterials and systems by design - SMALL

EeB.NMP.2013-1:
Nanotechnology for multifunctional lightweight construction materials and components - SMALL

:

Institution: Helmholtz-Zentrum Geesthacht
Profile/Expertise: see attachment


ID: PS-12-SI-701
Date: 03.05.2012
Topic:
NMP.2013.1.1-2:
Self-assembly of naturally occurring nanosystems - SMALL

NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE
Institution: Jozef Stefan Institute, Advanceed Materials Department
Profile/Expertise: see attachment


ID: PO-12-SI-700
Date: 03.05.2012
Topic:
NMP.2013.1.1-2:
Self-assembly of naturally occurring nanosystems - SMALL

NMP.2013.1.2-2:
Nanotherapeutics to treat bacterial infectious diseases - LARGE
Institution: Jozef Stefan Institute, Advanceed Materials Department
Profile/Expertise: see attachment


ID: PO-12-TR-699
Date: 02.05.2012
Topic:
NMP.2013.3.0-1:
Tools for Monitoring and Assessing Resource-efficiency in the Value Chain of process Industries - SMALL

FoF.NMP.2013-1:
Improved use of renewable resources at factory level - DEMO

FoF-NMP-2013-9:
Advanced concepts for technology-based business approaches addressing product-services and their manufacturing in globalised markets - SMALL
Institution: Hayat Chemicals Inc.
Profile/Expertise: see attachment


ID: PO-12-ES-698
Date: 24.04.2012
Topic:
NMP.2013.2.3-1:
Advanced materials - our allies for a sustainable future - CSA

NMP.2013.3.0-1:
Tools for Monitoring and Assessing Resource-efficiency in the Value Chain of process Industries - SMALL

FoF.NMP.2013-1:
Improved use of renewable resources at factory level - DEMO
Institution: KIM (Knowledge Innovation Market)
Profile/Expertise: see attachment


ID: PO-12-AT-697
Date: 10.04.2012
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

FoF.NMP.2012-5:
High precision production technologies for high quality 3D micro-parts - SMALL

FoF.NMP.2012-7:
Innovative technologies for casting, material removing and forming processes - DEMO
Institution: University of Applied Sciences Vorarlberg
Profile/Expertise: see attachment


ID: PO-12-GB-695
Date: 23.01.2012
Topic:
NMP.2012.1.1-1:
Rational design of nano-catalysts for sustainable energy production based on fundamental understanding - SMALL

NMP.2012.1.4-2:
Hierarchical assembly of nanoscale building blocks - SMALL

NMP.2012.2.2-2:
Materials for data storage - SMALL
Institution: Manchester Interdisciplinary Biocentre, University of Manchester
Profile/Expertise: see attachment


ID: PO-11-IE-693
Date: 19.12.2011
Topic:
NMP.2012.1.2-1:
Nanotechnology solutions for in-situ soil and groundwater remediation - LARGE

NMP.2012.2.2-6:
Photocatalytic materials for depollution - SMALL
Institution: T.E. Laboratories
Profile/Expertise: see attachment


ID: PO-11-DE-688
Date: 15.11.2011
Topic:
EeB.NMP.2012-6:
Methodologies for Knowledge transfer within the value chain and particularly to SMEs - CSA
Institution: Projektträger Jülich
Profile/Expertise: see attachment


ID: PO-11-IT-687
Date: 08.11.2011
Topic:
FoF.NMP.2012-7:
Innovative technologies for casting, material removing and forming processes - DEMO
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-686
Date: 08.11.2011
Topic:
FoF.NMP.2012-3:
Intelligent production machines and \\\'plug-and-produce\\\' devices for the adaptive system integration of automation equipment, robots and other intelligent machines, peripheral devices, smart sensors and industrial IT systems - SME

FoF.NMP.2012-4:
High-performance manufacturing technologies in terms of efficiency (volumes, speed, process capability etc), robustness and accuracy - DEMO

FoF.NMP.2012-5:
High precision production technologies for high quality 3D micro-parts - SMALL
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IL-685
Date: 29.10.2011
Topic:
NMP.2012.1.2-2:
Development and phase-I clinical trials of novel therapeutic nanotechnology-enabled systems for the diagnosis and treatment of atherosclerosis - LARGE

NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE

NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: GARD Ltd
Profile/Expertise: see attachment


ID: PS-11-IL-684
Date: 29.10.2011
Topic:
NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: GARD Ltd
Profile/Expertise: see attachment


ID: PO-11-ES-683
Date: 28.10.2011
Topic:
NMP.2012.2.1-2:
Fine chemicals from CO2 - SMALL

NMP.2012.3.0-1:
Highly efficient chemical syntheses using alternative energy forms - SMALL
Institution: Institute of Chemical Research of Catalonia (ICIQ)
Profile/Expertise: see attachment


ID: PO-11-IE-682
Date: 27.10.2011
Topic:
NMP.2012.1.4-2:
Hierarchical assembly of nanoscale building blocks - SMALL
Institution: Tyndall National Institute, University College Cork
Profile/Expertise: see attachment


ID: PO-11-UA-681
Date: 27.10.2011
Topic:
NMP.2012.1.4-1:
Pilot lines for precision synthesis of nanomaterials - LARGE
Institution: Institute of pulse processes and technologies (IPPT)
Profile/Expertise: see attachment


ID: PO-11-DE-680
Date: 27.10.2011
Topic:
NMP.2012.1.2-1:
Nanotechnology solutions for in-situ soil and groundwater remediation - LARGE
Institution: IBZ-Salzchemie GmbH & Co.KG
Profile/Expertise: see attachment


ID: PO-11-IE-678
Date: 24.10.2011
Topic:
NMP.2012.1.4-5:
Improving education in nanotechnologies to match the skill needs of EU industry and society - CSA
Institution: CRANN
Profile/Expertise: see attachment


ID: PS-11-DE-676
Date: 20.10.2011
Topic:
NMP.2012.4.1-3:
Development of advanced magnetic materials without, or with reduced use of, critical raw materials - SMALL
Institution: eff² dr. klaus moll
Profile/Expertise: see attachment


ID: PO-11-BE-674
Date: 19.10.2011
Topic:
NMP.2012.1.1-1:
Rational design of nano-catalysts for sustainable energy production based on fundamental understanding - SMALL

NMP.2012.1.2-1:
Nanotechnology solutions for in-situ soil and groundwater remediation - LARGE

NMP.2012.2.2-6:
Photocatalytic materials for depollution - SMALL
Institution: Université Libre de bruxelles
Profile/Expertise: see attachment


ID: PO-11-IE-672
Date: 18.10.2011
Topic:
FoF.NMP.2012-1:
Adaptive production systems and measurement and control equipment for optimal energy consumption and near-to-zero emissions in manufacturing processes - LARGE

EeB.NMP.2012-2:
Systemic Approach for retrofitting existing buildings, including envelope upgrading, high performance lighting systems, energy-efficient HVAC systems and renewable energy generation systems - LARGE

EeB.NMP.2012-4:
Nanotechnology based approaches to increase the performance of HVAC systems - SMALL
Institution: PM Group
Profile/Expertise: see attachment


ID: PO-11-ES-670
Date: 18.10.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

FoF.NMP.2012-4:
High-performance manufacturing technologies in terms of efficiency (volumes, speed, process capability etc), robustness and accuracy - DEMO
Institution: Institut Químic de Sarrià (IQS), Ramon Llull University
Profile/Expertise: see attachment


ID: PO-11-GB-658
Date: 10.10.2011
Topic:
NMP.2012.1.4-1:
Pilot lines for precision synthesis of nanomaterials - LARGE
Institution: Mantis Deposition Ltd.
Profile/Expertise: see attachment


ID: PO-11-IT-656
Date: 07.10.2011
Topic:
EeB.NMP.2012-1:
Interaction and integration between buildings, grids, heating and cooling networks, and energy storage and energy generation systems - LARGE

EeB.NMP.2012-2:
Systemic Approach for retrofitting existing buildings, including envelope upgrading, high performance lighting systems, energy-efficient HVAC systems and renewable energy generation systems - LARGE
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-654
Date: 07.10.2011
Topic:
EeB.NMP.2012-1:
Interaction and integration between buildings, grids, heating and cooling networks, and energy storage and energy generation systems - LARGE

EeB.NMP.2012-2:
Systemic Approach for retrofitting existing buildings, including envelope upgrading, high performance lighting systems, energy-efficient HVAC systems and renewable energy generation systems - LARGE
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-FR-652
Date: 05.10.2011
Topic:
FoF.NMP.2012-1:
Adaptive production systems and measurement and control equipment for optimal energy consumption and near-to-zero emissions in manufacturing processes - LARGE

FoF.NMP.2012-4:
High-performance manufacturing technologies in terms of efficiency (volumes, speed, process capability etc), robustness and accuracy - DEMO

FoF.NMP.2012-6:
Knowledge-based tools and approaches for process planning and integrated process simulation at factory level - SMALL
Institution: Pole Europeen de Plasturgie
Profile/Expertise: see attachment


ID: PO-11-FR-651
Date: 05.10.2011
Topic:
NMP.2012.4.0-1:
Novel materials and design-based solutions for the creative industry - SME
Institution: Pole Europeen de Plasturgie
Profile/Expertise: see attachment


ID: PO-11-TR-650
Date: 05.10.2011
Topic:
NMP.2012.1.4-3:
Nanoscale mechanical metrology for industrial processes and products - SME

NMP.2012.2.1-3:
Self-healing materials for prolonged lifetime - SMALL
Institution: Mir Research &Development Inc.
Profile/Expertise: see attachment


ID: PO-11-FR-649
Date: 05.10.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

FoF.NMP.2012-2:
Methodologies and tools for the sustainable, predictive maintenance of production equipment - SME

GC.NMP.2012-2:
Innovative advanced lightweight materials for the next generation of environmentally-friendly electric vehicles (topic implemented jointly by NMP, Transport and Environment Themes) - LARGE
Institution: Pole Europeen de Plasturgie
Profile/Expertise: see attachment


ID: PO-11-ES-647
Date: 04.10.2011
Topic:
GC.NMP.2012-1:
Innovative automotive electrochemical storage applications based on nanotechnology - SMALL
Institution: Sgenia Soluciones
Profile/Expertise: see attachment


ID: PO-11-ES-646
Date: 04.10.2011
Topic:
FoF.NMP.2012-2:
Methodologies and tools for the sustainable, predictive maintenance of production equipment - SME
Institution: Instituto Andaluz de Tecnología - IAT (Andalusian Institute of Technology)
Profile/Expertise: see attachment


ID: PO-11-IE-645
Date: 04.10.2011
Topic:
NMP.2012.2.1-3:
Self-healing materials for prolonged lifetime - SMALL
Institution: Athlone Institute of Technology
Profile/Expertise: see attachment


ID: PS-11-ES-644
Date: 04.10.2011
Topic:
FoF.NMP.2012-4:
High-performance manufacturing technologies in terms of efficiency (volumes, speed, process capability etc), robustness and accuracy - DEMO
Institution: Red Aragon 7PM
Profile/Expertise: see attachment


ID: PO-11-ES-642
Date: 03.10.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.2.2-3:
Advanced materials for high-temperature power generation - SMALL

NMP.2012.2.2-4:
Cost-effective materials for larger blades for off-shore wind energy applications - SMALL
Institution: National Centre for Metallurgical Research (CENIM-CSIC)
Profile/Expertise: see attachment


ID: PO-11-ES-641
Date: 03.10.2011
Topic:
NMP.2012.4.0-2:
Support for standardisation needs - CSA

FoF.NMP.2012-7:
Innovative technologies for casting, material removing and forming processes - DEMO

GC.NMP.2012-2:
Innovative advanced lightweight materials for the next generation of environmentally-friendly electric vehicles (topic implemented jointly by NMP, Transport and Environment Themes) - LARGE
Institution: National Centre for Metallurgical Research (CENIM-CSIC)
Profile/Expertise: see attachment


ID: PO-11-IE-640
Date: 30.09.2011
Topic:
NMP.2012.1.3-2:
Modelling toxicity behaviour of engineered nanoparticles - SMALL

NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: Athlone Institute of Technology
Profile/Expertise: see attachment


ID: PO-11-ES-637
Date: 28.09.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE

NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.4.0-1:
Novel materials and design-based solutions for the creative industry - SME
Institution: CITTA, Textile Technological Center
Profile/Expertise: see attachment


ID: PO-11-ES-635
Date: 27.09.2011
Topic:
EeB.NMP.2012-6:
Methodologies for Knowledge transfer within the value chain and particularly to SMEs - CSA
Institution: Catalonia Energy Efficiency Cluster (CEEC)
Profile/Expertise: see attachment


ID: PO-11-IE-634
Date: 27.09.2011
Topic:
EeB.NMP.2012-1:
Interaction and integration between buildings, grids, heating and cooling networks, and energy storage and energy generation systems - LARGE
Institution: Building Life Consultancy
Profile/Expertise: see attachment


ID: PO-11-IE-633
Date: 27.09.2011
Topic:
EeB.NMP.2012-2:
Systemic Approach for retrofitting existing buildings, including envelope upgrading, high performance lighting systems, energy-efficient HVAC systems and renewable energy generation systems - LARGE

EeB.NMP.2012-3:
Development and validation of new \\\'processes and business models\\\' for the next generation of performance based energy-efficient buildings integrating new services - SME

EeB.NMP.2012-6:
Methodologies for Knowledge transfer within the value chain and particularly to SMEs - CSA
Institution: Building Life Consultancy
Profile/Expertise: see attachment


ID: PO-11-IE-631
Date: 26.09.2011
Topic:
NMP.2012.1.2-2:
Development and phase-I clinical trials of novel therapeutic nanotechnology-enabled systems for the diagnosis and treatment of atherosclerosis - LARGE

NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE

NMP.2012.1.3-2:
Modelling toxicity behaviour of engineered nanoparticles - SMALL
Institution: Queens University Belfast School of Pharmacy
Profile/Expertise: see attachment


ID: PO-11-ES-630
Date: 26.09.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.2.2-6:
Photocatalytic materials for depollution - SMALL

NMP.2012.4.1-3:
Development of advanced magnetic materials without, or with reduced use of, critical raw materials - SMALL
Institution: KRAFFT S.L.
Profile/Expertise: see attachment


ID: PO-11-CH-629
Date: 23.09.2011
Topic:
NMP.2012.1.2-2:
Development and phase-I clinical trials of novel therapeutic nanotechnology-enabled systems for the diagnosis and treatment of atherosclerosis - LARGE

NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE

NMP.2012.1.3-3:
Regulatory testing of nanomaterials - LARGE
Institution: Douglas Connect
Profile/Expertise: see attachment


ID: PO-11-IE-628
Date: 23.09.2011
Topic:
NMP.2012.2.2-4:
Cost-effective materials for larger blades for off-shore wind energy applications - SMALL
Institution: Irish Centre for Composites Research, University of Limerick
Profile/Expertise: see attachment


ID: PS-11-GB-627
Date: 23.09.2011
Topic:
NMP.2012.1.3-2:
Modelling toxicity behaviour of engineered nanoparticles - SMALL
Institution: The University of Manchester
Profile/Expertise: see attachment


ID: PO-11-ES-624
Date: 21.09.2011
Topic:
EeB.NMP.2012-2:
Systemic Approach for retrofitting existing buildings, including envelope upgrading, high performance lighting systems, energy-efficient HVAC systems and renewable energy generation systems - LARGE
Institution: CEMOSA
Profile/Expertise: see attachment


ID: PO-11-ES-623
Date: 21.09.2011
Topic:
EeB.NMP.2012-1:
Interaction and integration between buildings, grids, heating and cooling networks, and energy storage and energy generation systems - LARGE
Institution: CEMOSA
Profile/Expertise: see attachment


ID: PS-11-ES-622
Date: 20.09.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL
Institution: AIMEN Technology Centre
Profile/Expertise: see attachment


ID: PS-11-IT-621
Date: 20.09.2011
Topic:
NMP.2012.2.2-6:
Photocatalytic materials for depollution - SMALL
Institution: E.N.E.A.Italian National agency for new technologies, Energy and sustainable economic development
Profile/Expertise: see attachment


ID: PO-11-ES-620
Date: 20.09.2011
Topic:
EeB.NMP.2012-2:
Systemic Approach for retrofitting existing buildings, including envelope upgrading, high performance lighting systems, energy-efficient HVAC systems and renewable energy generation systems - LARGE
Institution: VORSEVI
Profile/Expertise: see attachment


ID: PO-11-ES-619
Date: 20.09.2011
Topic:
NMP.2012.2.1-3:
Self-healing materials for prolonged lifetime - SMALL
Institution: VORSEVI
Profile/Expertise: see attachment


ID: PO-11-ES-618
Date: 20.09.2011
Topic:
NMP.2012.1.2-1:
Nanotechnology solutions for in-situ soil and groundwater remediation - LARGE
Institution: VORSEVI
Profile/Expertise: see attachment


ID: PO-11-ES-617
Date: 20.09.2011
Topic:
NMP.2012.1.1-1:
Rational design of nano-catalysts for sustainable energy production based on fundamental understanding - SMALL

NMP.2012.1.4-1:
Pilot lines for precision synthesis of nanomaterials - LARGE

NMP.2012.2.2-3:
Advanced materials for high-temperature power generation - SMALL
Institution: Torrecid SA
Profile/Expertise: see attachment


ID: PO-11-ES-615
Date: 19.09.2011
Topic:
NMP.2012.4.1-4:
Substitution of critical raw materials: networking, specifying R&D needs and priorities - CSA
Institution: Habitec Technological Centre
Profile/Expertise: see attachment


ID: PO-11-ES-614
Date: 19.09.2011
Topic:
NMP.2012.4.0-3:
Innovation in the forest-based sector for increasing resource efficiency and tackling climate change with competitive customer solutions - ERA-NET Plus topic jointly implemented by Theme 2, FAFB, and Theme 4, NMP - CSA
Institution: Habitec Technological Centre
Profile/Expertise: see attachment


ID: PO-11-ES-613
Date: 19.09.2011
Topic:
NMP.2012.3.0-2:
Total Safety Management for industrial organisations - SMALL
Institution: Habitec Technological Centre
Profile/Expertise: see attachment


ID: PS-11-ES-612
Date: 16.09.2011
Topic:
FoF.NMP.2012-7:
Innovative technologies for casting, material removing and forming processes - DEMO
Institution: AIMEN Technology Centre
Profile/Expertise: see attachment


ID: PO-11-DE-608
Date: 16.09.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE

GC.NMP.2012-2:
Innovative advanced lightweight materials for the next generation of environmentally-friendly electric vehicles (topic implemented jointly by NMP, Transport and Environment Themes) - LARGE
Institution: Leibniz-Institut für Polymerforschung Dresden e.V.
Profile/Expertise: see attachment


ID: PS-11-ES-607
Date: 15.09.2011
Topic:
FoF.NMP.2012-6:
Knowledge-based tools and approaches for process planning and integrated process simulation at factory level - SMALL
Institution: AIMEN Technology Centre
Profile/Expertise: see attachment


ID: PO-11-IT-605
Date: 15.09.2011
Topic:
FoF.NMP.2012-7:
Innovative technologies for casting, material removing and forming processes - DEMO

GC.NMP.2012-2:
Innovative advanced lightweight materials for the next generation of environmentally-friendly electric vehicles (topic implemented jointly by NMP, Transport and Environment Themes) - LARGE
Institution: Zanardi Fonderie Spa
Profile/Expertise: see attachment


ID: PO-11-FR-603
Date: 15.09.2011
Topic:
GC.NMP.2012-2:
Innovative advanced lightweight materials for the next generation of environmentally-friendly electric vehicles (topic implemented jointly by NMP, Transport and Environment Themes) - LARGE
Institution: CEMCAT
Profile/Expertise: see attachment


ID: PS-11-IT-602
Date: 14.09.2011
Topic:
NMP.2012.4.0-2:
Support for standardisation needs - CSA
Institution: Zanardi Fonderie Spa
Profile/Expertise: see attachment


ID: PO-11-ES-599
Date: 13.09.2011
Topic:
NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: Red Aragon 7PM
Profile/Expertise: see attachment


ID: PO-11-ES-598
Date: 13.09.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE
Institution: Red Aragon 7PM
Profile/Expertise: see attachment


ID: PO-11-IT-597
Date: 13.09.2011
Topic:
NMP.2012.3.0-2:
Total Safety Management for industrial organisations - SMALL

FoF.NMP.2012-1:
Adaptive production systems and measurement and control equipment for optimal energy consumption and near-to-zero emissions in manufacturing processes - LARGE

FoF.NMP.2012-4:
High-performance manufacturing technologies in terms of efficiency (volumes, speed, process capability etc), robustness and accuracy - DEMO
Institution: idea-re
Profile/Expertise: see attachment


ID: PO-11-IT-596
Date: 13.09.2011
Topic:
FoF.NMP.2012-2:
Methodologies and tools for the sustainable, predictive maintenance of production equipment - SME

FoF.NMP.2012-6:
Knowledge-based tools and approaches for process planning and integrated process simulation at factory level - SMALL
Institution: idea-re
Profile/Expertise: see attachment


ID: PO-11-IT-595
Date: 13.09.2011
Topic:
NMP.2012.3.0-2:
Total Safety Management for industrial organisations - SMALL

FoF.NMP.2012-1:
Adaptive production systems and measurement and control equipment for optimal energy consumption and near-to-zero emissions in manufacturing processes - LARGE

FoF.NMP.2012-6:
Knowledge-based tools and approaches for process planning and integrated process simulation at factory level - SMALL
Institution: idea-re
Profile/Expertise: see attachment


ID: PO-11-IT-594
Date: 13.09.2011
Topic:
NMP.2012.4.1-2:
Innovative recycling technologies of key metals in high-tech applications - SME
Institution: idea-re
Profile/Expertise: see attachment


ID: PO-11-TR-591
Date: 12.09.2011
Topic:
NMP.2012.1.4-1:
Pilot lines for precision synthesis of nanomaterials - LARGE

NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.4.0-1:
Novel materials and design-based solutions for the creative industry - SME
Institution: Sabanci University Nanotechnology Research and Application Center
Profile/Expertise: see attachment


ID: PO-11-ES-590
Date: 08.09.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.2.1-3:
Self-healing materials for prolonged lifetime - SMALL

NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: Andalusian Center for Molecular Biology and Regenerative Medicine (CABIMER)
Profile/Expertise: see attachment


ID: PO-11-TR-589
Date: 07.09.2011
Topic:
NMP.2012.2.2-6:
Photocatalytic materials for depollution - SMALL

NMP.2012.2.2-5:
Halogen-free flame retardant materials - SME

NMP.2012.4.0-1:
Novel materials and design-based solutions for the creative industry - SME
Institution: Nanotego Nano Teknolojik Urunler Arastirma Kimya Sanayi ve Ticaret A.S.
Profile/Expertise: see attachment


ID: PO-11-FR-588
Date: 07.09.2011
Topic:
NMP.2012.1.3-2:
Modelling toxicity behaviour of engineered nanoparticles - SMALL

NMP.2012.1.4-1:
Pilot lines for precision synthesis of nanomaterials - LARGE

NMP.2012.1.4-2:
Hierarchical assembly of nanoscale building blocks - SMALL
Institution: LIONS, UMR SIS2M CEA-CNRS 3299, CEA Saclay
Profile/Expertise: see attachment


ID: PO-11-IE-585
Date: 06.09.2011
Topic:
EeB.NMP.2012-1:
Interaction and integration between buildings, grids, heating and cooling networks, and energy storage and energy generation systems - LARGE

EeB.NMP.2012-2:
Systemic Approach for retrofitting existing buildings, including envelope upgrading, high performance lighting systems, energy-efficient HVAC systems and renewable energy generation systems - LARGE
Institution: IBM
Profile/Expertise: see attachment


ID: PO-11-FR-584
Date: 06.09.2011
Topic:
GC.NMP.2012-2:
Innovative advanced lightweight materials for the next generation of environmentally-friendly electric vehicles (topic implemented jointly by NMP, Transport and Environment Themes) - LARGE
Institution: FOREST LINE
Profile/Expertise: see attachment


ID: PO-11-ES-582
Date: 05.09.2011
Topic:
GC.NMP.2012-2:
Innovative advanced lightweight materials for the next generation of environmentally-friendly electric vehicles (topic implemented jointly by NMP, Transport and Environment Themes) - LARGE
Institution: Red Aragon 7PM
Profile/Expertise: see attachment


ID: PO-11-ES-581
Date: 05.09.2011
Topic:
NMP.2012.1.4-5:
Improving education in nanotechnologies to match the skill needs of EU industry and society - CSA
Institution: Red Aragon 7PM
Profile/Expertise: see attachment


ID: PO-11-IE-574
Date: 02.09.2011
Topic:
NMP.2012.1.1-1:
Rational design of nano-catalysts for sustainable energy production based on fundamental understanding - SMALL

NMP.2012.2.2-3:
Advanced materials for high-temperature power generation - SMALL

GC.NMP.2012-1:
Innovative automotive electrochemical storage applications based on nanotechnology - SMALL
Institution: IBM
Profile/Expertise: see attachment


ID: PO-11-DE-573
Date: 02.09.2011
Topic:
NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE

NMP.2012.2.2-2:
Materials for data storage - SMALL

NMP.2012.2.2-5:
Halogen-free flame retardant materials - SME
Institution: University of Applied Sciences Merseburg
Profile/Expertise: see attachment


ID: PO-11-RU-572
Date: 02.09.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE

NMP.2012.1.4-5:
Improving education in nanotechnologies to match the skill needs of EU industry and society - CSA

NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: Materials Science and Industry of Nanosystems Department at Voronezh State University
Profile/Expertise: see attachment


ID: PO-11-RU-571
Date: 01.09.2011
Topic:
NMP.2012.2.3-1:
Networking of ETPs and main materials collective stakeholders in materials science and engineering - CSA
Institution: The Institute of Petroleum Chemistry, Siberian Division of the Russian Academy of Sciences
Profile/Expertise: see attachment


ID: PO-11-SK-570
Date: 30.08.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL
Institution: Institute of Physics, Slovak Academy of Sciences
Profile/Expertise: see attachment


ID: PO-11-IT-569
Date: 26.08.2011
Topic:
FoF.NMP.2012-7:
Innovative technologies for casting, material removing and forming processes - DEMO
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-DE-568
Date: 24.08.2011
Topic:
FoF.NMP.2012-1:
Adaptive production systems and measurement and control equipment for optimal energy consumption and near-to-zero emissions in manufacturing processes - LARGE
Institution: Center of Maritime Technologies e. V. (CMT)
Profile/Expertise: see attachment


ID: PO-11-DE-567
Date: 24.08.2011
Topic:
FoF.NMP.2012-2:
Methodologies and tools for the sustainable, predictive maintenance of production equipment - SME

FoF.NMP.2012-6:
Knowledge-based tools and approaches for process planning and integrated process simulation at factory level - SMALL
Institution: Center of Maritime Technologies e. V. (CMT)
Profile/Expertise: see attachment


ID: PO-11-IT-566
Date: 24.08.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.2.1-3:
Self-healing materials for prolonged lifetime - SMALL
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-565
Date: 23.08.2011
Topic:
NMP.2012.1.4-2:
Hierarchical assembly of nanoscale building blocks - SMALL
Institution: University of Trieste
Profile/Expertise: see attachment


ID: PS-11-IT-564
Date: 23.08.2011
Topic:
NMP.2012.1.4-2:
Hierarchical assembly of nanoscale building blocks - SMALL
Institution: University of Trieste
Profile/Expertise: see attachment


ID: PO-11-GB-562
Date: 22.08.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL
Institution: University of Manchester
Profile/Expertise: see attachment


ID: PO-11-IT-557
Date: 22.08.2011
Topic:
FoF.NMP.2012-4:
High-performance manufacturing technologies in terms of efficiency (volumes, speed, process capability etc), robustness and accuracy - DEMO
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-556
Date: 22.08.2011
Topic:
FoF.NMP.2012-1:
Adaptive production systems and measurement and control equipment for optimal energy consumption and near-to-zero emissions in manufacturing processes - LARGE

FoF.NMP.2012-2:
Methodologies and tools for the sustainable, predictive maintenance of production equipment - SME

FoF.NMP.2012-3:
Intelligent production machines and \\\'plug-and-produce\\\' devices for the adaptive system integration of automation equipment, robots and other intelligent machines, peripheral devices, smart sensors and industrial IT systems - SME
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-DE-554
Date: 18.08.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE

NMP.2012.1.4-1:
Pilot lines for precision synthesis of nanomaterials - LARGE

NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: Particular GmbH
Profile/Expertise: see attachment


ID: PO-11-AT-552
Date: 16.08.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE
Institution: Medical University of Vienna
Profile/Expertise: see attachment


ID: PS-11-AT-551
Date: 16.08.2011
Topic:
NMP.2012.1.3-2:
Modelling toxicity behaviour of engineered nanoparticles - SMALL
Institution: Medical University of Vienna
Profile/Expertise: see attachment


ID: PO-11-CH-548
Date: 16.08.2011
Topic:
NMP.2012.1.4-5:
Improving education in nanotechnologies to match the skill needs of EU industry and society - CSA
Institution: FSRM Swiss Foundation for Research in Microtechnology
Profile/Expertise: see attachment


ID: PO-11-CH-546
Date: 12.08.2011
Topic:
NMP.2012.1.4-3:
Nanoscale mechanical metrology for industrial processes and products - SME
Institution: NanoWorld AG
Profile/Expertise: see attachment


ID: PO-11-CH-545
Date: 12.08.2011
Topic:
NMP.2012.1.4-3:
Nanoscale mechanical metrology for industrial processes and products - SME
Institution: NanoWorld AG
Profile/Expertise: see attachment


ID: PO-11-IT-544
Date: 12.08.2011
Topic:
NMP.2012.2.1-3:
Self-healing materials for prolonged lifetime - SMALL

NMP.2012.4.0-1:
Novel materials and design-based solutions for the creative industry - SME

FoF.NMP.2012-1:
Adaptive production systems and measurement and control equipment for optimal energy consumption and near-to-zero emissions in manufacturing processes - LARGE
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-TR-543
Date: 11.08.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE

NMP.2012.1.3-2:
Modelling toxicity behaviour of engineered nanoparticles - SMALL

NMP.2012.1.3-3:
Regulatory testing of nanomaterials - LARGE
Institution: Sabanci University
Profile/Expertise: see attachment


ID: PO-11-IT-542
Date: 11.08.2011
Topic:
FoF.NMP.2012-3:
Intelligent production machines and \\\'plug-and-produce\\\' devices for the adaptive system integration of automation equipment, robots and other intelligent machines, peripheral devices, smart sensors and industrial IT systems - SME

FoF.NMP.2012-4:
High-performance manufacturing technologies in terms of efficiency (volumes, speed, process capability etc), robustness and accuracy - DEMO

FoF.NMP.2012-7:
Innovative technologies for casting, material removing and forming processes - DEMO
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-541
Date: 11.08.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

FoF.NMP.2012-1:
Adaptive production systems and measurement and control equipment for optimal energy consumption and near-to-zero emissions in manufacturing processes - LARGE

FoF.NMP.2012-2:
Methodologies and tools for the sustainable, predictive maintenance of production equipment - SME
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-GB-540
Date: 11.08.2011
Topic:
NMP.2012.4.1-1:
New environmentally friendly approaches in minerals processing - LARGE
Institution: Enterprise Europe Network
Profile/Expertise: see attachment


ID: PO-11-FR-539
Date: 10.08.2011
Topic:
NMP.2012.1.1-1:
Rational design of nano-catalysts for sustainable energy production based on fundamental understanding - SMALL

NMP.2012.1.4-1:
Pilot lines for precision synthesis of nanomaterials - LARGE

NMP.2012.1.4-3:
Nanoscale mechanical metrology for industrial processes and products - SME
Institution: CNRS UMR 6087 LPEC
Profile/Expertise: see attachment


ID: PO-11-DE-538
Date: 09.08.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

GC.NMP.2012-2:
Innovative advanced lightweight materials for the next generation of environmentally-friendly electric vehicles (topic implemented jointly by NMP, Transport and Environment Themes) - LARGE
Institution: University of Paderborn, Laboratory for Materials and Joining technologies
Profile/Expertise: see attachment


ID: PO-11-NL-535
Date: 08.08.2011
Topic:
NMP.2012.1.4-2:
Hierarchical assembly of nanoscale building blocks - SMALL
Institution: PNO Consultants
Profile/Expertise: see attachment


ID: PO-11-NL-534
Date: 07.08.2011
Topic:
NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: PNO Consultants
Profile/Expertise: see attachment


ID: PO-11-TN-533
Date: 05.08.2011
Topic:
NMP.2012.2.2-6:
Photocatalytic materials for depollution - SMALL

EeB.NMP.2012-5:
Novel materials for smart windows conceived as affordable multifunctional systems offering enhanced energy control - SMALL
Institution: Centre de recherches et des technologies de l'energie
Profile/Expertise: see attachment


ID: PO-11-IT-532
Date: 05.08.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.2.2-3:
Advanced materials for high-temperature power generation - SMALL

NMP.2012.4.1-3:
Development of advanced magnetic materials without, or with reduced use of, critical raw materials - SMALL
Institution: Dipartimento di Chimica e Chimica Industriale, Università di Genova
Profile/Expertise: see attachment


ID: PO-11-IT-531
Date: 05.08.2011
Topic:
NMP.2012.4.1-1:
New environmentally friendly approaches in minerals processing - LARGE

NMP.2012.4.1-2:
Innovative recycling technologies of key metals in high-tech applications - SME

NMP.2012.4.1-4:
Substitution of critical raw materials: networking, specifying R&D needs and priorities - CSA
Institution: Dipartimento di Chimica e Chimica Industriale, Università di Genova
Profile/Expertise: see attachment


ID: PO-11-IT-530
Date: 05.08.2011
Topic:
GC.NMP.2012-1:
Innovative automotive electrochemical storage applications based on nanotechnology - SMALL

GC.NMP.2012-2:
Innovative advanced lightweight materials for the next generation of environmentally-friendly electric vehicles (topic implemented jointly by NMP, Transport and Environment Themes) - LARGE
Institution: Dipartimento di Chimica e Chimica Industriale, Università di Genova
Profile/Expertise: see attachment


ID: PO-11-DE-529
Date: 04.08.2011
Topic:
FoF.NMP.2012-6:
Knowledge-based tools and approaches for process planning and integrated process simulation at factory level - SMALL

FoF.NMP.2012-7:
Innovative technologies for casting, material removing and forming processes - DEMO
Institution: Fraunhofer Institute for Mechanics of Materials IWM
Profile/Expertise: see attachment


ID: PO-11-DE-528
Date: 04.08.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

GC.NMP.2012-2:
Innovative advanced lightweight materials for the next generation of environmentally-friendly electric vehicles (topic implemented jointly by NMP, Transport and Environment Themes) - LARGE
Institution: Fraunhofer Institute for Mechanics of Materials IWM
Profile/Expertise: see attachment


ID: PO-11-CH-527
Date: 04.08.2011
Topic:
NMP.2012.1.4-2:
Hierarchical assembly of nanoscale building blocks - SMALL

NMP.2012.1.4-3:
Nanoscale mechanical metrology for industrial processes and products - SME

FoF.NMP.2012-5:
High precision production technologies for high quality 3D micro-parts - SMALL
Institution: Alemnis GmbH
Profile/Expertise: see attachment


ID: PO-11-ES-526
Date: 03.08.2011
Topic:
EeB.NMP.2012-4:
Nanotechnology based approaches to increase the performance of HVAC systems - SMALL

EeB.NMP.2012-5:
Novel materials for smart windows conceived as affordable multifunctional systems offering enhanced energy control - SMALL

GC.NMP.2012-1:
Innovative automotive electrochemical storage applications based on nanotechnology - SMALL
Institution: FideNa - Foundation for Research and Development in Nanotechnology
Profile/Expertise: see attachment


ID: PO-11-ES-525
Date: 03.08.2011
Topic:
NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: FideNa - Foundation for Research and Development in Nanotechnology
Profile/Expertise: see attachment


ID: PO-11-ES-524
Date: 03.08.2011
Topic:
NMP.2012.2.2-3:
Advanced materials for high-temperature power generation - SMALL

NMP.2012.2.2-4:
Cost-effective materials for larger blades for off-shore wind energy applications - SMALL
Institution: FideNa - Foundation for Research and Development in Nanotechnology
Profile/Expertise: see attachment


ID: PO-11-ES-523
Date: 03.08.2011
Topic:
NMP.2012.1.4-1:
Pilot lines for precision synthesis of nanomaterials - LARGE

NMP.2012.1.4-2:
Hierarchical assembly of nanoscale building blocks - SMALL
Institution: FideNa - Foundation for Research and Development in Nanotechnology
Profile/Expertise: see attachment


ID: PO-11-ES-522
Date: 03.08.2011
Topic:
NMP.2012.1.1-1:
Rational design of nano-catalysts for sustainable energy production based on fundamental understanding - SMALL

NMP.2012.1.2-1:
Nanotechnology solutions for in-situ soil and groundwater remediation - LARGE

NMP.2012.2.2-6:
Photocatalytic materials for depollution - SMALL
Institution: FideNa - Foundation for Research and Development in Nanotechnology
Profile/Expertise: see attachment


ID: PO-11-ES-521
Date: 03.08.2011
Topic:
NMP.2012.1.2-2:
Development and phase-I clinical trials of novel therapeutic nanotechnology-enabled systems for the diagnosis and treatment of atherosclerosis - LARGE

NMP.2012.1.2-3:
ERA-NET on Nanomedicine - CSA

NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE
Institution: FideNa - Foundation for Research and Development in Nanotechnology
Profile/Expertise: see attachment


ID: PO-11-DK-518
Date: 02.08.2011
Topic:
NMP.2012.1.4-2:
Hierarchical assembly of nanoscale building blocks - SMALL

NMP.2012.2.1-3:
Self-healing materials for prolonged lifetime - SMALL
Institution: Danish Technological Institute
Profile/Expertise: see attachment


ID: PO-11-ES-517
Date: 29.07.2011
Topic:
NMP.2012.2.1-3:
Self-healing materials for prolonged lifetime - SMALL
Institution: CIDETEC - IK4
Profile/Expertise: see attachment


ID: PO-11-DE-516
Date: 29.07.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE

NMP.2012.1.3-2:
Modelling toxicity behaviour of engineered nanoparticles - SMALL

NMP.2012.1.3-3:
Regulatory testing of nanomaterials - LARGE
Institution: Zentrum für Umweltforschung und nachhaltige Technologien (UFT, Universität Bremen
Profile/Expertise: see attachment


ID: PO-11-ES-512
Date: 29.07.2011
Topic:
NMP.2012.2.1-3:
Self-healing materials for prolonged lifetime - SMALL

NMP.2012.2.2-6:
Photocatalytic materials for depollution - SMALL

GC.NMP.2012-2:
Innovative advanced lightweight materials for the next generation of environmentally-friendly electric vehicles (topic implemented jointly by NMP, Transport and Environment Themes) - LARGE
Institution: Fundación CIDETEC
Profile/Expertise: see attachment


ID: PO-11-ES-511
Date: 29.07.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE

NMP.2012.2.2-3:
Advanced materials for high-temperature power generation - SMALL
Institution: CIDETEC
Profile/Expertise: see attachment


ID: PO-11-ES-510
Date: 29.07.2011
Topic:
NMP.2013.1.2-1:
Nanotechnology-based sensors for environmental monitoring - SMALL

NMP.2013.4.0-1:
Graphene production technologies - LARGE
Institution: CIDETEC
Profile/Expertise: see attachment


ID: PO-11-ES-508
Date: 28.07.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE

NMP.2012.1.3-2:
Modelling toxicity behaviour of engineered nanoparticles - SMALL

NMP.2012.1.3-3:
Regulatory testing of nanomaterials - LARGE
Institution: Centro de Investigaciones Biologicas (CIB) (CSIC)
Profile/Expertise: see attachment


ID: PO-11-NL-507
Date: 28.07.2011
Topic:
NMP.2012.2.1-3:
Self-healing materials for prolonged lifetime - SMALL
Institution: PNO Consultants
Profile/Expertise: see attachment


ID: PO-11-NL-505
Date: 28.07.2011
Topic:
NMP.2012.2.1-2:
Fine chemicals from CO2 - SMALL

NMP.2012.4.0-1:
Novel materials and design-based solutions for the creative industry - SME
Institution: PNO Consultants
Profile/Expertise: see attachment


ID: PO-11-NL-504
Date: 28.07.2011
Topic:
NMP.2012.2.2-6:
Photocatalytic materials for depollution - SMALL
Institution: PNO Consultants
Profile/Expertise: see attachment


ID: PO-11-NL-503
Date: 28.07.2011
Topic:
FoF.NMP.2012-1:
Adaptive production systems and measurement and control equipment for optimal energy consumption and near-to-zero emissions in manufacturing processes - LARGE

FoF.NMP.2012-2:
Methodologies and tools for the sustainable, predictive maintenance of production equipment - SME

FoF.NMP.2012-6:
Knowledge-based tools and approaches for process planning and integrated process simulation at factory level - SMALL
Institution: PNO Consultants
Profile/Expertise: see attachment


ID: PO-11-NL-502
Date: 28.07.2011
Topic:
EeB.NMP.2012-5:
Novel materials for smart windows conceived as affordable multifunctional systems offering enhanced energy control - SMALL
Institution: PNO Consultants
Profile/Expertise: see attachment


ID: PO-11-NL-501
Date: 28.07.2011
Topic:
NMP.2012.1.2-1:
Nanotechnology solutions for in-situ soil and groundwater remediation - LARGE

NMP.2012.1.4-2:
Hierarchical assembly of nanoscale building blocks - SMALL

NMP.2012.4.0-1:
Novel materials and design-based solutions for the creative industry - SME
Institution: PNO Consultants
Profile/Expertise: see attachment


ID: PO-11-ES-499
Date: 28.07.2011
Topic:
NMP.2012.1.4-1:
Pilot lines for precision synthesis of nanomaterials - LARGE

NMP.2012.1.4-3:
Nanoscale mechanical metrology for industrial processes and products - SME

NMP.2012.4.0-1:
Novel materials and design-based solutions for the creative industry - SME
Institution: CIDETEC
Profile/Expertise: see attachment


ID: PO-11-ES-498
Date: 28.07.2011
Topic:
NMP.2012.4.1-3:
Development of advanced magnetic materials without, or with reduced use of, critical raw materials - SMALL
Institution: CIDETEC
Profile/Expertise: see attachment


ID: PO-11-ES-497
Date: 28.07.2011
Topic:
NMP.2012.1.2-1:
Nanotechnology solutions for in-situ soil and groundwater remediation - LARGE
Institution: CIDETEC
Profile/Expertise: see attachment


ID: PO-11-ES-496
Date: 28.07.2011
Topic:
NMP.2012.1.1-1:
Rational design of nano-catalysts for sustainable energy production based on fundamental understanding - SMALL
Institution: CIDETEC
Profile/Expertise: see attachment


ID: PO-11-ES-495
Date: 27.07.2011
Topic:
NMP.2012.4.0-2:
Support for standardisation needs - CSA
Institution: NANOIMMUNOTECH SL
Profile/Expertise: see attachment


ID: PO-11-ES-494
Date: 27.07.2011
Topic:
NMP.2012.1.4-3:
Nanoscale mechanical metrology for industrial processes and products - SME

NMP.2012.1.4-4:
Evaluation of EC communication and dialogue on research and innovation in nanotechnologies and design of future needs for the EU (industry and society) - CSA

NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL
Institution: NANOIMMUNOTECH SL
Profile/Expertise: see attachment


ID: PO-11-ES-493
Date: 27.07.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE

NMP.2012.1.3-2:
Modelling toxicity behaviour of engineered nanoparticles - SMALL

NMP.2012.1.3-3:
Regulatory testing of nanomaterials - LARGE
Institution: NANOIMMUNOTECH SL
Profile/Expertise: see attachment


ID: PO-11-ES-492
Date: 27.07.2011
Topic:
NMP.2012.1.2-2:
Development and phase-I clinical trials of novel therapeutic nanotechnology-enabled systems for the diagnosis and treatment of atherosclerosis - LARGE

NMP.2012.1.2-3:
ERA-NET on Nanomedicine - CSA
Institution: NANOIMMUNOTECH SL
Profile/Expertise: see attachment


ID: PO-11-ES-491
Date: 27.07.2011
Topic:
NMP.2012.2.1-2:
Fine chemicals from CO2 - SMALL
Institution: CIDETEC
Profile/Expertise: see attachment


ID: PO-11-ES-490
Date: 27.07.2011
Topic:
NMP.2012.1.2-1:
Nanotechnology solutions for in-situ soil and groundwater remediation - LARGE

NMP.2012.4.1-2:
Innovative recycling technologies of key metals in high-tech applications - SME
Institution: CIDETEC
Profile/Expertise: see attachment


ID: PO-11-ES-489
Date: 27.07.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL
Institution: CIDETEC
Profile/Expertise: see attachment


ID: PO-11-FR-488
Date: 27.07.2011
Topic:
NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: Octalia Technologies
Profile/Expertise: see attachment


ID: PO-11-DE-485
Date: 25.07.2011
Topic:
FoF.NMP.2012-5:
High precision production technologies for high quality 3D micro-parts - SMALL
Institution: RWTH Aachen University, Institute of Mineral Engineering
Profile/Expertise: see attachment


ID: PO-11-IE-483
Date: 25.07.2011
Topic:
FoF.NMP.2012-5:
High precision production technologies for high quality 3D micro-parts - SMALL
Institution: CDAMC
Profile/Expertise: see attachment


ID: PS-11-AT-482
Date: 25.07.2011
Topic:
NMP.2012.2.2-5:
Halogen-free flame retardant materials - SME
Institution: Montanuniversitaet Leoben, Department Polymer Engineering and Science
Profile/Expertise: see attachment


ID: PO-11-FR-481
Date: 25.07.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.2.2-3:
Advanced materials for high-temperature power generation - SMALL

NMP.2012.4.0-1:
Novel materials and design-based solutions for the creative industry - SME
Institution: ICERMA
Profile/Expertise: see attachment


ID: PO-11-IT-480
Date: 24.07.2011
Topic:
NMP.2012.2.2-6:
Photocatalytic materials for depollution - SMALL

NMP.2012.4.1-2:
Innovative recycling technologies of key metals in high-tech applications - SME
Institution: University of Calabria - Department of Chemical Engineering and Materials
Profile/Expertise: see attachment


ID: PS-11-TR-476
Date: 22.07.2011
Topic:
NMP.2012.2.2-2:
Materials for data storage - SMALL
Institution: Bilkent University - UNAM
Profile/Expertise: see attachment


ID: PS-11-TR-475
Date: 22.07.2011
Topic:
NMP.2012.2.2-2:
Materials for data storage - SMALL
Institution: Bilkent University - UNAM
Profile/Expertise: see attachment


ID: PO-11-DE-471
Date: 22.07.2011
Topic:
NMP.2012.2.1-2:
Fine chemicals from CO2 - SMALL

NMP.2012.2.2-6:
Photocatalytic materials for depollution - SMALL
Institution: Friedrich-Schiller-University Jena, Institute for Inorganic and Analytical Chemistry
Profile/Expertise: see attachment


ID: PO-11-GB-455
Date: 20.07.2011
Topic:
NMP.2012.1.1-1:
Rational design of nano-catalysts for sustainable energy production based on fundamental understanding - SMALL

NMP.2012.1.2-1:
Nanotechnology solutions for in-situ soil and groundwater remediation - LARGE

NMP.2012.2.2-5:
Halogen-free flame retardant materials - SME
Institution: Knowledge Centre for Materials Chemistry
Profile/Expertise: see attachment


ID: PO-11-DE-454
Date: 20.07.2011
Topic:
FoF.NMP.2012-4:
High-performance manufacturing technologies in terms of efficiency (volumes, speed, process capability etc), robustness and accuracy - DEMO

FoF.NMP.2012-5:
High precision production technologies for high quality 3D micro-parts - SMALL

FoF.NMP.2012-7:
Innovative technologies for casting, material removing and forming processes - DEMO
Institution: Institute of Machining Technology, TU Dortmund University
Profile/Expertise: see attachment


ID: PO-11-GB-453
Date: 19.07.2011
Topic:
FoF.NMP.2012-3:
Intelligent production machines and \\\'plug-and-produce\\\' devices for the adaptive system integration of automation equipment, robots and other intelligent machines, peripheral devices, smart sensors and industrial IT systems - SME
Institution: AMAC, School of Engineering, Cranfield University
Profile/Expertise: see attachment


ID: PO-11-FR-452
Date: 19.07.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE
Institution: European Research Service PRES L'UNAM
Profile/Expertise: see attachment


ID: PO-11-ES-451
Date: 17.07.2011
Topic:
NMP.2012.2.1-3:
Self-healing materials for prolonged lifetime - SMALL

NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: Universitat Jaume I (PIMA Research Group)
Profile/Expertise: see attachment


ID: PO-11-GB-447
Date: 15.07.2011
Topic:
NMP.2012.2.2-4:
Cost-effective materials for larger blades for off-shore wind energy applications - SMALL
Institution: University of Warwick
Profile/Expertise: see attachment


ID: PO-11-CH-446
Date: 15.07.2011
Topic:
NMP.2012.1.4-1:
Pilot lines for precision synthesis of nanomaterials - LARGE

NMP.2012.3.0-2:
Total Safety Management for industrial organisations - SMALL

FoF.NMP.2012-2:
Methodologies and tools for the sustainable, predictive maintenance of production equipment - SME
Institution: JetSolutions SA
Profile/Expertise: see attachment


ID: PO-11-DE-445
Date: 14.07.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.2.2-3:
Advanced materials for high-temperature power generation - SMALL

FoF.NMP.2012-4:
High-performance manufacturing technologies in terms of efficiency (volumes, speed, process capability etc), robustness and accuracy - DEMO
Institution: Institute for Manufacturing and Welding, Chemnitz University of Technology
Profile/Expertise: see attachment


ID: PO-11-GB-444
Date: 14.07.2011
Topic:
NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE

NMP.2012.2.2-5:
Halogen-free flame retardant materials - SME

GC.NMP.2012-2:
Innovative advanced lightweight materials for the next generation of environmentally-friendly electric vehicles (topic implemented jointly by NMP, Transport and Environment Themes) - LARGE
Institution: NetComposites Ltd
Profile/Expertise: see attachment


ID: PO-11-AT-443
Date: 14.07.2011
Topic:
EeB.NMP.2012-5:
Novel materials for smart windows conceived as affordable multifunctional systems offering enhanced energy control - SMALL
Institution: JOANNEUM RESEARCH, MATERIALS
Profile/Expertise: see attachment


ID: PO-11-AT-442
Date: 14.07.2011
Topic:
FoF.NMP.2012-3:
Intelligent production machines and \\\'plug-and-produce\\\' devices for the adaptive system integration of automation equipment, robots and other intelligent machines, peripheral devices, smart sensors and industrial IT systems - SME
Institution: JOANNEUM RESEARCH, MATERIALS
Profile/Expertise: see attachment


ID: PO-11-AT-441
Date: 14.07.2011
Topic:
FoF.NMP.2012-5:
High precision production technologies for high quality 3D micro-parts - SMALL
Institution: JOANNEUM RESEARCH, MATERIALS
Profile/Expertise: see attachment


ID: PO-11-AT-440
Date: 14.07.2011
Topic:
FoF.NMP.2012-5:
High precision production technologies for high quality 3D micro-parts - SMALL
Institution: JOANNEUM RESEARCH, MATERIALS
Profile/Expertise: see attachment


ID: PO-11-DE-439
Date: 14.07.2011
Topic:
NMP.2012.1.1-1:
Rational design of nano-catalysts for sustainable energy production based on fundamental understanding - SMALL

NMP.2012.2.2-6:
Photocatalytic materials for depollution - SMALL

GC.NMP.2012-1:
Innovative automotive electrochemical storage applications based on nanotechnology - SMALL
Institution: Materials Research Institute DLR
Profile/Expertise: see attachment


ID: PO-11-AT-438
Date: 14.07.2011
Topic:
NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: JOANNEUM RESEARCH, MATERIALS
Profile/Expertise: see attachment


ID: PO-11-BE-437
Date: 13.07.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.2.2-3:
Advanced materials for high-temperature power generation - SMALL

NMP.2012.2.2-4:
Cost-effective materials for larger blades for off-shore wind energy applications - SMALL
Institution: Belgian Welding Institute
Profile/Expertise: see attachment


ID: PO-11-ES-436
Date: 11.07.2011
Topic:
FoF.NMP.2012-6:
Knowledge-based tools and approaches for process planning and integrated process simulation at factory level - SMALL
Institution: Universidad Rey Juan Carlos
Profile/Expertise: see attachment


ID: PS-11-ES-435
Date: 11.07.2011
Topic:
FoF.NMP.2012-6:
Knowledge-based tools and approaches for process planning and integrated process simulation at factory level - SMALL
Institution: Universidad Rey Juan Carlos
Profile/Expertise: see attachment


ID: PO-11-SK-434
Date: 10.07.2011
Topic:
NMP.2012.2.2-6:
Photocatalytic materials for depollution - SMALL

NMP.2012.2.2-5:
Halogen-free flame retardant materials - SME
Institution: Research Institute for Man-Made Fibres / VUCHV, a.s.
Profile/Expertise: see attachment


ID: PO-11-NL-433
Date: 08.07.2011
Topic:
NMP.2012.1.1-1:
Rational design of nano-catalysts for sustainable energy production based on fundamental understanding - SMALL

NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: Feyecon D&I BV
Profile/Expertise: see attachment


ID: PO-11-DE-432
Date: 08.07.2011
Topic:
FoF.NMP.2012-1:
Adaptive production systems and measurement and control equipment for optimal energy consumption and near-to-zero emissions in manufacturing processes - LARGE

FoF.NMP.2012-2:
Methodologies and tools for the sustainable, predictive maintenance of production equipment - SME

FoF.NMP.2012-6:
Knowledge-based tools and approaches for process planning and integrated process simulation at factory level - SMALL
Institution: Fraunhofer IPA
Profile/Expertise: see attachment


ID: PO-11-FR-431
Date: 08.07.2011
Topic:
NMP.2012.1.4-3:
Nanoscale mechanical metrology for industrial processes and products - SME
Institution: FORMULACTION
Profile/Expertise: see attachment


ID: PO-11-FR-430
Date: 08.07.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE

NMP.2012.1.3-2:
Modelling toxicity behaviour of engineered nanoparticles - SMALL

NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: University Paul Sabatier, Toulouse 3
Profile/Expertise: see attachment


ID: PO-11-DE-429
Date: 07.07.2011
Topic:
FoF.NMP.2012-7:
Innovative technologies for casting, material removing and forming processes - DEMO

EeB.NMP.2012-2:
Systemic Approach for retrofitting existing buildings, including envelope upgrading, high performance lighting systems, energy-efficient HVAC systems and renewable energy generation systems - LARGE

GC.NMP.2012-2:
Innovative advanced lightweight materials for the next generation of environmentally-friendly electric vehicles (topic implemented jointly by NMP, Transport and Environment Themes) - LARGE
Institution: Fraunhofer Institute for Machine Tools and Forming Technology IWU
Profile/Expertise: see attachment


ID: PO-11-TW-428
Date: 07.07.2011
Topic:
NMP.2012.1.1-1:
Rational design of nano-catalysts for sustainable energy production based on fundamental understanding - SMALL

NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE
Institution: Department of Materials Science and Engineering, National Chung Kung University
Profile/Expertise: see attachment


ID: PO-11-GB-426
Date: 05.07.2011
Topic:
FoF.NMP.2012-5:
High precision production technologies for high quality 3D micro-parts - SMALL
Institution: Cranfield University
Profile/Expertise: see attachment


ID: PO-11-DE-424
Date: 04.07.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE

NMP.2012.1.3-2:
Modelling toxicity behaviour of engineered nanoparticles - SMALL

NMP.2012.1.3-3:
Regulatory testing of nanomaterials - LARGE
Institution: Helmholtz-Zentrum Dresden - Rossendorf
Profile/Expertise: see attachment


ID: PO-11-DE-423
Date: 04.07.2011
Topic:
NMP.2012.4.0-2:
Support for standardisation needs - CSA

NMP.2012.4.1-2:
Innovative recycling technologies of key metals in high-tech applications - SME

NMP.2012.4.1-4:
Substitution of critical raw materials: networking, specifying R&D needs and priorities - CSA
Institution: Forschungsgemeinschaft Feuerfest e.V.
Profile/Expertise: see attachment


ID: PO-11-ES-422
Date: 21.06.2011
Topic:
NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE

FoF.NMP.2012-4:
High-performance manufacturing technologies in terms of efficiency (volumes, speed, process capability etc), robustness and accuracy - DEMO
Institution: Institut Químic de Sarrià (IQS), Ramon Llull University
Profile/Expertise: see attachment


ID: PO-11-SK-420
Date: 17.06.2011
Topic:
NMP.2012.2.1-2:
Fine chemicals from CO2 - SMALL

NMP.2012.2.2-5:
Halogen-free flame retardant materials - SME
Institution: VUP, a.s.
Profile/Expertise: see attachment


ID: PO-11-IE-419
Date: 16.06.2011
Topic:
NMP.2012.1.4-1:
Pilot lines for precision synthesis of nanomaterials - LARGE

NMP.2012.2.1-1:
Joining dissimilar materials (excluding applications specific only to healthcare) - SMALL

NMP.2012.2.2-1:
Biomaterials for improved performance of medical implants - LARGE
Institution: National Centre for Laser Applications
Profile/Expertise: see attachment


ID: PO-11-ES-416
Date: 15.06.2011
Topic:
NMP.2012.4.0-1:
Novel materials and design-based solutions for the creative industry - SME
Institution: Leitat Technological Center
Profile/Expertise: see attachment


ID: PO-11-ES-415
Date: 15.06.2011
Topic:
NMP.2012.4.1-1:
New environmentally friendly approaches in minerals processing - LARGE
Institution: Leitat Technological Center
Profile/Expertise: see attachment


ID: PO-11-ES-414
Date: 15.06.2011
Topic:
NMP.2012.2.2-5:
Halogen-free flame retardant materials - SME
Institution: Leitat Technological Center
Profile/Expertise: see attachment


ID: PO-11-ES-413
Date: 15.06.2011
Topic:
NMP.2012.1.4-1:
Pilot lines for precision synthesis of nanomaterials - LARGE
Institution: Leitat Technological Center
Profile/Expertise: see attachment


ID: PO-11-ES-412
Date: 15.06.2011
Topic:
NMP.2012.1.3-1:
Systematic investigations of the mechanisms and effects of engineered nanomaterial interactions with living systems and/or the environment - LARGE
Institution: Leitat Technological Center
Profile/Expertise: see attachment


ID: PO-11-ES-411
Date: 15.06.2011
Topic:
NMP.2012.1.1-1:
Rational design of nano-catalysts for sustainable energy production based on fundamental understanding - SMALL
Institution: Leitat Technological Center
Profile/Expertise: see attachment


ID: PO-11-ES-409
Date: 09.06.2011
Topic:
GC.NMP.2012-1:
Innovative automotive electrochemical storage applications based on nanotechnology - SMALL
Institution: UPC
Profile/Expertise: see attachment


ID: PO-11-FI-406
Date: 02.03.2011
Topic:
NMP.2011.1.3-2:
Worker protection and exposure risk management strategies for nanomaterial production, use and disposal - SMALL

NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE

ENV-NMP-2011-2.2-5:
Development of advanced compatible materials and techniques and their application for the protection, conservation and/or restoration of cultural heritage assets. Joint Call with ENV - SME
Institution: University of Eastern Finland
Profile/Expertise: see attachment


ID: PO-11-DK-402
Date: 03.02.2011
Topic:
:


:


:

Institution: Danish Technological Institute
Profile/Expertise: see attachment


ID: PO-11-IT-399
Date: 21.01.2011
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

NMP-2011-2.3-1:
Advanced recyclable packaging materials from renewable biogenic resources (SICA) - SMALL
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-398
Date: 19.01.2011
Topic:
EeB.NMP.2011-2:
New efficient solutions for energy generation, storage and use related to space heating and domestic water in existing buildings - LARGE
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-397
Date: 19.01.2011
Topic:
FoF.NMP.2011-5:
Towards zero-defect manufacturing - LARGE

FoF.NMP.2011-6:
Manufacturing chains for nano-phased components and coatings - LARGE
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-396
Date: 18.01.2011
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

NMP-2011-2.3-1:
Advanced recyclable packaging materials from renewable biogenic resources (SICA) - SMALL
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-DE-395
Date: 18.01.2011
Topic:
NMP.2011.1.4-5:
Multiscale Modelling as a Tool for Virtual Nanotechnology Experimentation - Coordinated call with Russia - SMALL
Institution: IfU GmbH
Profile/Expertise: see attachment


ID: PO-11-IT-394
Date: 17.01.2011
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

FoF.NMP.2011-4:
High tech solutions in the production processes for customised green, safe and healthy consumer products - SME

FoF.NMP.2011-5:
Towards zero-defect manufacturing - LARGE
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-RU-393
Date: 12.01.2011
Topic:
NMP.2011.1.4-5:
Multiscale Modelling as a Tool for Virtual Nanotechnology Experimentation - Coordinated call with Russia - SMALL
Institution: Lebedev Physics Institute of RAS, Samara branch
Profile/Expertise: see attachment


ID: PO-11-IT-392
Date: 11.01.2011
Topic:
NMP.2011.3.1-1:
Eco-design for new products - SMALL

NMP-2011-4.0-1:
New technologies based on physical processing of materials for mechanical or electro-technical applications - LARGE

FoF.NMP.2011-5:
Towards zero-defect manufacturing - LARGE
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-391
Date: 10.01.2011
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-390
Date: 04.01.2011
Topic:
NMP.2011.3.1-1:
Eco-design for new products - SMALL
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-389
Date: 04.01.2011
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-388
Date: 04.01.2011
Topic:
NMP.2011.3.1-1:
Eco-design for new products - SMALL

FoF.NMP.2011-6:
Manufacturing chains for nano-phased components and coatings - LARGE

EeB.NMP.2011-2:
New efficient solutions for energy generation, storage and use related to space heating and domestic water in existing buildings - LARGE
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-387
Date: 04.01.2011
Topic:
NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME

NMP.2011.3.1-1:
Eco-design for new products - SMALL
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-386
Date: 04.01.2011
Topic:
NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE

NMP.2011.3.1-1:
Eco-design for new products - SMALL

NMP.2011.4.0-3:
Advanced textiles for the energy and environmental protection markets - SME
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-11-IT-385
Date: 04.01.2011
Topic:
EeB.NMP.2011-3:
Energy saving technologies for buildings envelope retrofitting - LARGE
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-10-IT-383
Date: 10.12.2010
Topic:
NMP.2011.3.1-1:
Eco-design for new products - SMALL

NMP-2011-4.0-1:
New technologies based on physical processing of materials for mechanical or electro-technical applications - LARGE

FoF.NMP.2011-6:
Manufacturing chains for nano-phased components and coatings - LARGE
Institution: Warrant Group S.r.l.
Profile/Expertise: see attachment


ID: PO-10-DK-381
Date: 23.11.2010
Topic:
NMP.2011.1.4-5:
Multiscale Modelling as a Tool for Virtual Nanotechnology Experimentation - Coordinated call with Russia - SMALL
Institution: QuantumWise A/S
Profile/Expertise: see attachment


ID: PO-10-FI-374
Date: 08.11.2010
Topic:
FoF.NMP.2011-1:
The Eco-Factory: cleaner and more resource-efficient production in manufacturing - LARGE

FoF.NMP.2011-3:
Robots for automation of post-production and other auxiliary processes - SMALL

FoF.NMP.2011-5:
Towards zero-defect manufacturing - LARGE
Institution: University of Oulu, Oulu Southern Institute
Profile/Expertise: see attachment


ID: PO-10-IE-373
Date: 05.11.2010
Topic:
NMP.2011.1.3-1:
New methods for measuring, detection and identification of nanoparticles in products and/or in the environment - SME

NMP.2011.1.4-4:
Nanotechnology based implantable and interfaceable devices - SMALL

NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME
Institution: HKPB sceintific Ltd.
Profile/Expertise: see attachment


ID: PO-10-GB-371
Date: 05.11.2010
Topic:
EeB-NMP.2011-1:
Materials for new energy efficient building components with reduced embodied energy - LARGE

EeB.NMP.2011-3:
Energy saving technologies for buildings envelope retrofitting - LARGE
Institution: LTN
Profile/Expertise: see attachment


ID: PS-10-ES-370
Date: 28.10.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE
Institution: ALMA CG
Profile/Expertise: see attachment


ID: PO-10-IE-369
Date: 27.10.2010
Topic:
EeB-NMP.2011-1:
Materials for new energy efficient building components with reduced embodied energy - LARGE

EeB.NMP.2011-2:
New efficient solutions for energy generation, storage and use related to space heating and domestic water in existing buildings - LARGE

EeB.NMP.2011-3:
Energy saving technologies for buildings envelope retrofitting - LARGE
Institution: RKD Architects
Profile/Expertise: see attachment


ID: PS-10-GB-368
Date: 26.10.2010
Topic:
EeB.NMP.2011-2:
New efficient solutions for energy generation, storage and use related to space heating and domestic water in existing buildings - LARGE
Institution: Ceres Power
Profile/Expertise: see attachment


ID: PS-10-ES-365
Date: 25.10.2010
Topic:
NMP.2011.3.4-1:
Eco-efficient management of industrial water - LARGE
Institution: Asociación MadridNetwork
Profile/Expertise: see attachment


ID: PO-10-ES-363
Date: 19.10.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

NMP.2011.1.3-1:
New methods for measuring, detection and identification of nanoparticles in products and/or in the environment - SME

NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME
Institution: Instituto Andaluz de Tecnología - IAT (Andalusian Institute of Technology)
Profile/Expertise: see attachment


ID: PO-10-GB-362
Date: 19.10.2010
Topic:
FoF.NMP.2011-6:
Manufacturing chains for nano-phased components and coatings - LARGE
Institution: Ionbond Ltd
Profile/Expertise: see attachment


ID: PO-10-PL-361
Date: 18.10.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

NMP.2011.1.3-1:
New methods for measuring, detection and identification of nanoparticles in products and/or in the environment - SME

EeB-NMP.2011-1:
Materials for new energy efficient building components with reduced embodied energy - LARGE
Institution: Wroclaw University of Technology
Profile/Expertise: see attachment


ID: PO-10-DE-360
Date: 18.10.2010
Topic:
FoF.NMP.2011-1:
The Eco-Factory: cleaner and more resource-efficient production in manufacturing - LARGE

FoF.NMP.2011-5:
Towards zero-defect manufacturing - LARGE

FoF.NMP.2011-6:
Manufacturing chains for nano-phased components and coatings - LARGE
Institution: flexis AG
Profile/Expertise: see attachment


ID: PO-10-DE-359
Date: 12.10.2010
Topic:
NMP.2011.1.4-5:
Multiscale Modelling as a Tool for Virtual Nanotechnology Experimentation - Coordinated call with Russia - SMALL
Institution: Weierstrass Institute for Applied Analysis and Stochastics (WIAS)
Profile/Expertise: see attachment


ID: PS-10-ES-356
Date: 07.10.2010
Topic:
NMP.2011.3.4-1:
Eco-efficient management of industrial water - LARGE
Institution: AIMEN Technology Centre
Profile/Expertise: see attachment


ID: PO-10-IT-355
Date: 07.10.2010
Topic:
EeB-NMP.2011-1:
Materials for new energy efficient building components with reduced embodied energy - LARGE

EeB.NMP.2011-3:
Energy saving technologies for buildings envelope retrofitting - LARGE
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PS-10-DE-354
Date: 06.10.2010
Topic:
EeB-NMP.2011-1:
Materials for new energy efficient building components with reduced embodied energy - LARGE
Institution: Institut für Textiltechnik (ITA) of RWTH Aachen University
Profile/Expertise: see attachment


ID: PO-10-SK-352
Date: 05.10.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

NMP.2011.1.4-2:
Development of nano-scale detection and control techniques for large area substrates - LARGE

NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME
Institution: Polymer Institute, Slovak Academy of Sciences
Profile/Expertise: see attachment


ID: PO-10-SK-351
Date: 05.10.2010
Topic:
NMP.2011.1.2-2:
New targeted therapy using nanotechnology for transport of macro-molecules across biological barriers - LARGE

NMP.2011.1.4-4:
Nanotechnology based implantable and interfaceable devices - SMALL

NMP-2011-2.2-2:
Biomaterials for tissue engineering for age-related cancer and sensory organ diseases - SMALL
Institution: Polymer Institute, Slovak Academy of Sciences
Profile/Expertise: see attachment


ID: PS-10-ES-350
Date: 01.10.2010
Topic:
FoF.NMP.2011-1:
The Eco-Factory: cleaner and more resource-efficient production in manufacturing - LARGE
Institution: Fundació CIM (UPC)
Profile/Expertise: see attachment


ID: PO-10-FI-349
Date: 30.09.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

NMP.2011.1.4-3:
Tools and methodologies for imaging structures and composition at the nanometre scale - SME

NMP.2011.1.4-5:
Multiscale Modelling as a Tool for Virtual Nanotechnology Experimentation - Coordinated call with Russia - SMALL
Institution: Nanordic Oy
Profile/Expertise: see attachment


ID: PO-10-DK-347
Date: 27.09.2010
Topic:
FoF.NMP.2011-1:
The Eco-Factory: cleaner and more resource-efficient production in manufacturing - LARGE

FoF.NMP.2011-6:
Manufacturing chains for nano-phased components and coatings - LARGE

EeB-NMP.2011-1:
Materials for new energy efficient building components with reduced embodied energy - LARGE
Institution: Technical University of Denmark
Profile/Expertise: see attachment


ID: PO-10-ES-346
Date: 27.09.2010
Topic:
NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME

NMP-2011-2.2-1:
Novel superconducting materials, architectures and processes for electro-technical applications - LARGE

NMP-2011-2.2-3:
Materials for solid state lighting - SMALL
Institution: Tecnología Navarra de Nanoproductos
Profile/Expertise: see attachment


ID: PO-10-ES-345
Date: 27.09.2010
Topic:
NMP.2011.1.3-1:
New methods for measuring, detection and identification of nanoparticles in products and/or in the environment - SME

NMP.2011.1.3-2:
Worker protection and exposure risk management strategies for nanomaterial production, use and disposal - SMALL
Institution: Tecnología Navarra de Nanoproductos
Profile/Expertise: see attachment


ID: PO-10-PL-340
Date: 24.09.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE

NMP.2011.1.4-2:
Development of nano-scale detection and control techniques for large area substrates - LARGE
Institution: West Pomeranian University of Technology - Department of Nanotechnology
Profile/Expertise: see attachment


ID: PS-10-ES-337
Date: 15.09.2010
Topic:
NMP-2011-2.3-1:
Advanced recyclable packaging materials from renewable biogenic resources (SICA) - SMALL
Institution: Leitat Technological Center
Profile/Expertise: see attachment


ID: PO-10-IE-336
Date: 15.09.2010
Topic:
NMP.2011.1.4-4:
Nanotechnology based implantable and interfaceable devices - SMALL
Institution: Biomedical Diagnostics Institute, Dublin City University
Profile/Expertise: see attachment


ID: PO-10-IT-330
Date: 06.09.2010
Topic:
NMP.2011.4.0-2:
Advanced underground technologies for intelligent mining and for inspection, maintenance and excavation - LARGE

FoF.NMP.2011-2:
Cooperative machines and open architecture control systems - SMALL

FoF.NMP.2011-3:
Robots for automation of post-production and other auxiliary processes - SMALL
Institution: S.M. Scienzia Machinale s.r.l.
Profile/Expertise: see attachment


ID: PO-10-IT-328
Date: 03.09.2010
Topic:
NMP.2011.1.4-5:
Multiscale Modelling as a Tool for Virtual Nanotechnology Experimentation - Coordinated call with Russia - SMALL

NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME

NMP-2011-4.0-1:
New technologies based on physical processing of materials for mechanical or electro-technical applications - LARGE
Institution: University "SAPIENZA" of ROME
Profile/Expertise: see attachment


ID: PO-10-IE-326
Date: 01.09.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

NMP.2011.1.3-1:
New methods for measuring, detection and identification of nanoparticles in products and/or in the environment - SME
Institution: Biomedical Diagnostics Institute, Dublin City University
Profile/Expertise: see attachment


ID: PS-10-DE-325
Date: 01.09.2010
Topic:
NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE

NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME
Institution: Fraunhofer FEP
Profile/Expertise: see attachment


ID: PO-10-ES-321
Date: 25.08.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

NMP-2011-2.3-1:
Advanced recyclable packaging materials from renewable biogenic resources (SICA) - SMALL
Institution: CIDETEC-IK4
Profile/Expertise: see attachment


ID: PO-10-IE-320
Date: 25.08.2010
Topic:
NMP-2011-4.0-1:
New technologies based on physical processing of materials for mechanical or electro-technical applications - LARGE

FoF.NMP.2011-6:
Manufacturing chains for nano-phased components and coatings - LARGE
Institution: University College Dublin
Profile/Expertise: see attachment


ID: PO-10-IE-319
Date: 25.08.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

NMP.2011.1.2-3:
Active nanomembranes/-filters/-adsorbents for efficient water treatment with stable or regenerable low-fouling surfaces - SMALL

NMP.2011.4.0-3:
Advanced textiles for the energy and environmental protection markets - SME
Institution: University College Dublin
Profile/Expertise: see attachment


ID: PO-10-IE-316
Date: 25.08.2010
Topic:
NMP-2011-2.2-3:
Materials for solid state lighting - SMALL

NMP-2011-2.3-3:
Networking of materials laboratories and innovation actors in various industrial sectors for product or process innovation - CSA-CA

FoF.NMP.2011-5:
Towards zero-defect manufacturing - LARGE
Institution: Centre for Industrial and Engineering Optics / Dublin Institute of Technology
Profile/Expertise: see attachment


ID: PO-10-CZ-315
Date: 24.08.2010
Topic:
NMP.2011.1.2-1:
Development and up-scaling of innovative photovoltaic cell processes and architectures to pilot-line scale for industrial application, Joint call with ENERGY - LARGE

NMP.2011.1.2-3:
Active nanomembranes/-filters/-adsorbents for efficient water treatment with stable or regenerable low-fouling surfaces - SMALL

GC.NMP.2011-1:
Advanced eco-design and manufacturing processes for batteries and electrical components. - LARGE
Institution: Kertak Nanotechnology s.r.o.
Profile/Expertise: see attachment


ID: PO-10-ES-312
Date: 24.08.2010
Topic:
ENV-NMP-2011-2.2-5:
Development of advanced compatible materials and techniques and their application for the protection, conservation and/or restoration of cultural heritage assets. Joint Call with ENV - SME
Institution: CIDETEC - IK4
Profile/Expertise: see attachment


ID: PO-10-ES-311
Date: 23.08.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

NMP.2011.1.2-1:
Development and up-scaling of innovative photovoltaic cell processes and architectures to pilot-line scale for industrial application, Joint call with ENERGY - LARGE

NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME
Institution: CARTIF Foundation
Profile/Expertise: see attachment


ID: PO-10-BE-310
Date: 20.08.2010
Topic:
NMP.2011.1.3-2:
Worker protection and exposure risk management strategies for nanomaterial production, use and disposal - SMALL
Institution: VITO NV (Flemish Institute for Technological Research)
Profile/Expertise: see attachment


ID: PS-10-ES-309
Date: 20.08.2010
Topic:
NMP-2011-2.3-1:
Advanced recyclable packaging materials from renewable biogenic resources (SICA) - SMALL
Institution: Altran Technologies
Profile/Expertise: see attachment


ID: PO-10-ES-308
Date: 20.08.2010
Topic:
NMP.2011.1.4-4:
Nanotechnology based implantable and interfaceable devices - SMALL

NMP-2011-2.2-2:
Biomaterials for tissue engineering for age-related cancer and sensory organ diseases - SMALL
Institution: Biomaterial and Tissue Engineering Centre
Profile/Expertise: see attachment


ID: PS-10-DE-306
Date: 17.08.2010
Topic:
NMP.2011.1.2-1:
Development and up-scaling of innovative photovoltaic cell processes and architectures to pilot-line scale for industrial application, Joint call with ENERGY - LARGE
Institution: University of Applied Science Jena
Profile/Expertise: see attachment


ID: PO-10-ES-305
Date: 17.08.2010
Topic:
NMP.2011.1.4-2:
Development of nano-scale detection and control techniques for large area substrates - LARGE
Institution: TITANIA, ensayos y proyectos industriales
Profile/Expertise: see attachment


ID: PS-10-TR-302
Date: 11.08.2010
Topic:
FoF.NMP.2011-1:
The Eco-Factory: cleaner and more resource-efficient production in manufacturing - LARGE
Institution: Middle East Technical University, Department of Mechanical Engineering
Profile/Expertise: see attachment


ID: PO-10-DE-296
Date: 10.08.2010
Topic:
NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE
Institution: Fraunhofer FEP
Profile/Expertise: see attachment


ID: PO-10-DK-295
Date: 10.08.2010
Topic:
FoF.NMP.2011-1:
The Eco-Factory: cleaner and more resource-efficient production in manufacturing - LARGE
Institution: Grundfos
Profile/Expertise: see attachment


ID: PO-10-IE-294
Date: 09.08.2010
Topic:
NMP-2011-2.2-3:
Materials for solid state lighting - SMALL

EeB.NMP.2011-3:
Energy saving technologies for buildings envelope retrofitting - LARGE
Institution: Ikon Semiconductor Ltd.
Profile/Expertise: see attachment


ID: PO-10-ES-293
Date: 09.08.2010
Topic:
NMP.2011.1.4-4:
Nanotechnology based implantable and interfaceable devices - SMALL

NMP-2011-2.2-4:
Novel materials for replacement of strategic or scarce raw materials (platinum group metals and rare earths) - SMALL
Institution: Spanish Research Council (CSIC)
Profile/Expertise: see attachment


ID: PO-10-GB-292
Date: 09.08.2010
Topic:
NMP.2011.4.0-3:
Advanced textiles for the energy and environmental protection markets - SME

EeB-NMP.2011-1:
Materials for new energy efficient building components with reduced embodied energy - LARGE

EeB.NMP.2011-3:
Energy saving technologies for buildings envelope retrofitting - LARGE
Institution: NetComposites Ltd
Profile/Expertise: see attachment


ID: PO-10-GB-291
Date: 09.08.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE

FoF.NMP.2011-6:
Manufacturing chains for nano-phased components and coatings - LARGE
Institution: NetComposites Ltd
Profile/Expertise: see attachment


ID: PO-10-GB-290
Date: 09.08.2010
Topic:
NMP.2011.1.3-1:
New methods for measuring, detection and identification of nanoparticles in products and/or in the environment - SME

NMP.2011.1.3-2:
Worker protection and exposure risk management strategies for nanomaterial production, use and disposal - SMALL

NMP.2011.1.3-3:
Intelligent testing strategies for nanomaterials impact and exposure - towards regulation and clustering of materials - CSA-SA
Institution: NetComposites Ltd
Profile/Expertise: see attachment


ID: PO-10-DE-288
Date: 06.08.2010
Topic:
FoF.NMP.2011-1:
The Eco-Factory: cleaner and more resource-efficient production in manufacturing - LARGE

FoF.NMP.2011-2:
Cooperative machines and open architecture control systems - SMALL

FoF.NMP.2011-5:
Towards zero-defect manufacturing - LARGE
Institution: Fraunhofer IPK
Profile/Expertise: see attachment


ID: PO-10-IE-286
Date: 05.08.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE
Institution: Hewlett Packard
Profile/Expertise: see attachment


ID: PO-10-ES-281
Date: 05.08.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE

NMP.2011.1.2-3:
Active nanomembranes/-filters/-adsorbents for efficient water treatment with stable or regenerable low-fouling surfaces - SMALL

NMP-2011-4.0-1:
New technologies based on physical processing of materials for mechanical or electro-technical applications - LARGE
Institution: Asociación de la Industria Navarra
Profile/Expertise: see attachment


ID: PO-10-ES-280
Date: 04.08.2010
Topic:
NMP.2011.1.2-1:
Development and up-scaling of innovative photovoltaic cell processes and architectures to pilot-line scale for industrial application, Joint call with ENERGY - LARGE

NMP.2011.1.2-2:
New targeted therapy using nanotechnology for transport of macro-molecules across biological barriers - LARGE

NMP.2011.1.2-3:
Active nanomembranes/-filters/-adsorbents for efficient water treatment with stable or regenerable low-fouling surfaces - SMALL
Institution: Asociación MadridNetwork
Profile/Expertise: see attachment


ID: PO-10-ES-279
Date: 04.08.2010
Topic:
NMP.2011.1.2-1:
Development and up-scaling of innovative photovoltaic cell processes and architectures to pilot-line scale for industrial application, Joint call with ENERGY - LARGE

NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE

FoF.NMP.2011-6:
Manufacturing chains for nano-phased components and coatings - LARGE
Institution: Tecnología Navarra de Nanoproductos
Profile/Expertise: see attachment


ID: PO-10-DE-277
Date: 02.08.2010
Topic:
NMP.2011.1.1-1:
Smart and multifunctional packaging concepts utilizing nanotechnology - LARGE
Institution: Fraunhofer POLO
Profile/Expertise: see attachment


ID: PO-10-BE-276
Date: 01.08.2010
Topic:
FoF.NMP.2011-5:
Towards zero-defect manufacturing - LARGE
Institution: Katholieke Universiteit Leuven
Profile/Expertise: see attachment


ID: PO-10-ES-274
Date: 30.07.2010
Topic:
NMP.2012.2.2-5:
Halogen-free flame retardant materials - SME
Institution: CIDETEC-IK4
Profile/Expertise: see attachment


ID: PO-10-IE-262
Date: 29.07.2010
Topic:
NMP.2011.1.2-3:
Active nanomembranes/-filters/-adsorbents for efficient water treatment with stable or regenerable low-fouling surfaces - SMALL

NMP-2011-2.2-3:
Materials for solid state lighting - SMALL

ENV-NMP-2011-2.2-5:
Development of advanced compatible materials and techniques and their application for the protection, conservation and/or restoration of cultural heritage assets. Joint Call with ENV - SME
Institution: Dublin City University / National Centre for Sensor Research
Profile/Expertise: see attachment


ID: PO-10-BE-258
Date: 28.07.2010
Topic:
NMP.2011.1.4-3:
Tools and methodologies for imaging structures and composition at the nanometre scale - SME
Institution: University of Antwerp
Profile/Expertise: see attachment


ID: PO-10-BE-257
Date: 27.07.2010
Topic:
NMP.2011.4.0-3:
Advanced textiles for the energy and environmental protection markets - SME
Institution: 3B The Fibreglass Compnay
Profile/Expertise: see attachment


ID: PO-10-IE-256
Date: 26.07.2010
Topic:
NMP.2011.1.4-4:
Nanotechnology based implantable and interfaceable devices - SMALL

NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME
Institution: SEAM South Eastern Applied Materials Research Group
Profile/Expertise: see attachment


ID: PO-10-ES-255
Date: 26.07.2010
Topic:
NMP.2011.3.1-1:
Eco-design for new products - SMALL

FoF.NMP.2011-2:
Cooperative machines and open architecture control systems - SMALL

FoF.NMP.2011-3:
Robots for automation of post-production and other auxiliary processes - SMALL
Institution: Indicam Technologies SL
Profile/Expertise: see attachment


ID: PS-10-ES-253
Date: 23.07.2010
Topic:
NMP-2011-2.2-3:
Materials for solid state lighting - SMALL
Institution: EMaS Research Center - Rovira i Virgili University
Profile/Expertise: see attachment


ID: PO-10-ES-250
Date: 21.07.2010
Topic:
NMP.2011.1.2-2:
New targeted therapy using nanotechnology for transport of macro-molecules across biological barriers - LARGE
Institution: Instituto de Ciencia y Tecnologia de Polimeros, CSIC
Profile/Expertise: see attachment


ID: PO-10-GB-249
Date: 21.07.2010
Topic:
EeB.NMP.2011-2:
New efficient solutions for energy generation, storage and use related to space heating and domestic water in existing buildings - LARGE

EeB.NMP.2011-3:
Energy saving technologies for buildings envelope retrofitting - LARGE

GC.NMP.2011-1:
Advanced eco-design and manufacturing processes for batteries and electrical components. - LARGE
Institution: University of Sheffield
Profile/Expertise: see attachment


ID: PO-10-IE-248
Date: 20.07.2010
Topic:
FoF.NMP.2012-1:
Adaptive production systems and measurement and control equipment for optimal energy consumption and near-to-zero emissions in manufacturing processes - LARGE

EeB.NMP.2012-1:
Interaction and integration between buildings, grids, heating and cooling networks, and energy storage and energy generation systems - LARGE

EeB.NMP.2012-6:
Methodologies for Knowledge transfer within the value chain and particularly to SMEs - CSA
Institution: Georgia tech Ireland
Profile/Expertise: see attachment


ID: PO-10-DE-247
Date: 20.07.2010
Topic:
NMP.2011.1.2-2:
New targeted therapy using nanotechnology for transport of macro-molecules across biological barriers - LARGE

NMP.2011.1.2-3:
Active nanomembranes/-filters/-adsorbents for efficient water treatment with stable or regenerable low-fouling surfaces - SMALL

NMP.2011.1.4-4:
Nanotechnology based implantable and interfaceable devices - SMALL
Institution: Fraunhofer Institute for Cell Therapy and Immunology IZI
Profile/Expertise: see attachment


ID: PS-10-IT-246
Date: 20.07.2010
Topic:
GC.NMP.2011-1:
Advanced eco-design and manufacturing processes for batteries and electrical components. - LARGE
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PS-10-IT-245
Date: 20.07.2010
Topic:
FoF.NMP.2011-6:
Manufacturing chains for nano-phased components and coatings - LARGE
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-NO-244
Date: 19.07.2010
Topic:
EeB.NMP.2011-3:
Energy saving technologies for buildings envelope retrofitting - LARGE
Institution: Life Synthesis
Profile/Expertise: see attachment


ID: PO-10-IT-243
Date: 16.07.2010
Topic:
EeB.NMP.2011-4:
Geo-clusters approach to support European energy-efficiency goals - CSA-CA

GC.NMP.2011-1:
Advanced eco-design and manufacturing processes for batteries and electrical components. - LARGE
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-IT-242
Date: 16.07.2010
Topic:
EeB-NMP.2011-1:
Materials for new energy efficient building components with reduced embodied energy - LARGE

EeB.NMP.2011-2:
New efficient solutions for energy generation, storage and use related to space heating and domestic water in existing buildings - LARGE

EeB.NMP.2011-3:
Energy saving technologies for buildings envelope retrofitting - LARGE
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-IT-241
Date: 16.07.2010
Topic:
FoF.NMP.2011-3:
Robots for automation of post-production and other auxiliary processes - SMALL

FoF.NMP.2011-5:
Towards zero-defect manufacturing - LARGE

FoF.NMP.2011-6:
Manufacturing chains for nano-phased components and coatings - LARGE
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-IT-240
Date: 16.07.2010
Topic:
NMP-2011-4.0-1:
New technologies based on physical processing of materials for mechanical or electro-technical applications - LARGE

NMP.2011.4.0-2:
Advanced underground technologies for intelligent mining and for inspection, maintenance and excavation - LARGE

NMP.2011.4.0-3:
Advanced textiles for the energy and environmental protection markets - SME
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-IT-239
Date: 16.07.2010
Topic:
NMP-2011-2.3-1:
Advanced recyclable packaging materials from renewable biogenic resources (SICA) - SMALL

NMP.2011.3.1-1:
Eco-design for new products - SMALL

NMP.2011.3.2-1:
Modelling and control of intensified process systems - SMALL
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-IT-238
Date: 16.07.2010
Topic:
NMP-2011-2.2-4:
Novel materials for replacement of strategic or scarce raw materials (platinum group metals and rare earths) - SMALL

ENV-NMP-2011-2.2-5:
Development of advanced compatible materials and techniques and their application for the protection, conservation and/or restoration of cultural heritage assets. Joint Call with ENV - SME

NMP-2011-2.2-6:
Fundamental properties of novel superconducting materials (coordinated call with Japan) - SMALL
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-IT-237
Date: 16.07.2010
Topic:
NMP-2011-2.2-1:
Novel superconducting materials, architectures and processes for electro-technical applications - LARGE

NMP-2011-2.2-2:
Biomaterials for tissue engineering for age-related cancer and sensory organ diseases - SMALL

NMP-2011-2.2-3:
Materials for solid state lighting - SMALL
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-IT-236
Date: 16.07.2010
Topic:
NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME

NMP-2011-2.1-2:
Modelling of ultrafast dynamics in materials - SMALL
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-IT-235
Date: 16.07.2010
Topic:
NMP.2011.1.4-5:
Multiscale Modelling as a Tool for Virtual Nanotechnology Experimentation - Coordinated call with Russia - SMALL
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-IT-234
Date: 16.07.2010
Topic:
NMP.2011.1.4-4:
Nanotechnology based implantable and interfaceable devices - SMALL

NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME

NMP-2011-2.1-2:
Modelling of ultrafast dynamics in materials - SMALL
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-IT-233
Date: 16.07.2010
Topic:
NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE

NMP.2011.1.4-2:
Development of nano-scale detection and control techniques for large area substrates - LARGE

NMP.2011.1.4-3:
Tools and methodologies for imaging structures and composition at the nanometre scale - SME
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-IT-232
Date: 16.07.2010
Topic:
NMP.2011.1.3-1:
New methods for measuring, detection and identification of nanoparticles in products and/or in the environment - SME

NMP.2011.1.3-2:
Worker protection and exposure risk management strategies for nanomaterial production, use and disposal - SMALL

NMP.2011.1.3-3:
Intelligent testing strategies for nanomaterials impact and exposure - towards regulation and clustering of materials - CSA-SA
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-IT-231
Date: 16.07.2010
Topic:
NMP.2011.1.2-1:
Development and up-scaling of innovative photovoltaic cell processes and architectures to pilot-line scale for industrial application, Joint call with ENERGY - LARGE

NMP.2011.1.2-2:
New targeted therapy using nanotechnology for transport of macro-molecules across biological barriers - LARGE

NMP.2011.1.2-3:
Active nanomembranes/-filters/-adsorbents for efficient water treatment with stable or regenerable low-fouling surfaces - SMALL
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PS-10-DE-230
Date: 15.07.2010
Topic:
FoF.NMP.2011-2:
Cooperative machines and open architecture control systems - SMALL
Institution: BIBA - Bremer Institut für Produktion und Logistik GmbH
Profile/Expertise: see attachment


ID: PS-10-IT-229
Date: 15.07.2010
Topic:
NMP-2011-4.0-1:
New technologies based on physical processing of materials for mechanical or electro-technical applications - LARGE
Institution: Politecnico di Torino
Profile/Expertise: see attachment


ID: PO-10-GB-224
Date: 12.07.2010
Topic:
NMP.2012.4.1-2:
Innovative recycling technologies of key metals in high-tech applications - SME

FoF.NMP.2012-1:
Adaptive production systems and measurement and control equipment for optimal energy consumption and near-to-zero emissions in manufacturing processes - LARGE

FoF.NMP.2012-6:
Knowledge-based tools and approaches for process planning and integrated process simulation at factory level - SMALL
Institution: Loughborough University
Profile/Expertise: see attachment


ID: PS-10-ES-223
Date: 12.07.2010
Topic:
NMP.2011.4.0-3:
Advanced textiles for the energy and environmental protection markets - SME
Institution: Leitat Technological Center
Profile/Expertise: see attachment


ID: PO-10-FR-221
Date: 12.07.2010
Topic:
NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME

NMP-2011-2.3-2:
ERA-NET on research on materials science and engineering, including international cooperation - CSA-CA

EeB-NMP.2011-1:
Materials for new energy efficient building components with reduced embodied energy - LARGE
Institution: specific polymers
Profile/Expertise: see attachment


ID: PO-10-GB-220
Date: 12.07.2010
Topic:
NMP-2011-2.2-3:
Materials for solid state lighting - SMALL
Institution: University of Hull, Department of Physics
Profile/Expertise: see attachment


ID: PO-10-DE-216
Date: 06.07.2010
Topic:
NMP-2011-2.2-4:
Novel materials for replacement of strategic or scarce raw materials (platinum group metals and rare earths) - SMALL

NMP-2011-2.3-3:
Networking of materials laboratories and innovation actors in various industrial sectors for product or process innovation - CSA-CA

NMP-2011-4.0-1:
New technologies based on physical processing of materials for mechanical or electro-technical applications - LARGE
Institution: Clausthaler Zentrum für Materialtechnik, Clausthal University of Technology
Profile/Expertise: see attachment


ID: PO-10-GR-212
Date: 29.06.2010
Topic:
NMP.2011.1.2-1:
Development and up-scaling of innovative photovoltaic cell processes and architectures to pilot-line scale for industrial application, Joint call with ENERGY - LARGE

NMP-2011-2.2-3:
Materials for solid state lighting - SMALL

GC.NMP.2011-1:
Advanced eco-design and manufacturing processes for batteries and electrical components. - LARGE
Institution: TEI of Crete, Electrical Engineering Department
Profile/Expertise: see attachment


ID: PO-10-ES-211
Date: 29.06.2010
Topic:
NMP-2011-2.3-1:
Advanced recyclable packaging materials from renewable biogenic resources (SICA) - SMALL
Institution: LAIMAT Soluciones Científico Técnicas
Profile/Expertise: see attachment


ID: PO-10-GR-209
Date: 25.06.2010
Topic:
NMP-2011-2.3-1:
Advanced recyclable packaging materials from renewable biogenic resources (SICA) - SMALL
Institution: Agricultural University of Athens
Profile/Expertise: see attachment


ID: PO-10-BY-206
Date: 18.06.2010
Topic:
NMP.2011.1.2-3:
Active nanomembranes/-filters/-adsorbents for efficient water treatment with stable or regenerable low-fouling surfaces - SMALL
Institution: SSI Powder Metallurgy Institute
Profile/Expertise: see attachment


ID: PO-10-BY-205
Date: 17.06.2010
Topic:
NMP.2011.1.2-3:
Active nanomembranes/-filters/-adsorbents for efficient water treatment with stable or regenerable low-fouling surfaces - SMALL

NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE
Institution: SSI Powder Metallurgy Institute
Profile/Expertise: see attachment


ID: PO-10-DE-204
Date: 15.06.2010
Topic:
NMP.2011.3.1-1:
Eco-design for new products - SMALL

NMP-2011-4.0-1:
New technologies based on physical processing of materials for mechanical or electro-technical applications - LARGE

FoF.NMP.2011-4:
High tech solutions in the production processes for customised green, safe and healthy consumer products - SME
Institution: EBF Dresden GmbH
Profile/Expertise: see attachment


ID: PO-10-BY-202
Date: 15.06.2010
Topic:
NMP.2011.1.2-3:
Active nanomembranes/-filters/-adsorbents for efficient water treatment with stable or regenerable low-fouling surfaces - SMALL

NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE
Institution: SSI Powder Metallurgy Institute
Profile/Expertise: see attachment


ID: PO-10-DE-200
Date: 11.06.2010
Topic:
NMP.2011.1.3-1:
New methods for measuring, detection and identification of nanoparticles in products and/or in the environment - SME

NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE

FoF.NMP.2011-1:
The Eco-Factory: cleaner and more resource-efficient production in manufacturing - LARGE
Institution: Forschungszentrum Dresden-Rossendorf e.V.
Profile/Expertise: see attachment


ID: PO-10-RU-199
Date: 10.06.2010
Topic:
NMP.2011.1.3-1:
New methods for measuring, detection and identification of nanoparticles in products and/or in the environment - SME

NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE
Institution: Joint institute for high temperature Russian Academy of Sciences
Profile/Expertise: see attachment


ID: PO-10-NO-198
Date: 09.06.2010
Topic:
NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE

NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME

NMP-2011-2.2-3:
Materials for solid state lighting - SMALL
Institution: Ceramic Powder Technology AS
Profile/Expertise: see attachment


ID: PO-10-IE-196
Date: 02.06.2010
Topic:
NMP.2011.1.4-3:
Tools and methodologies for imaging structures and composition at the nanometre scale - SME

NMP.2011.1.4-4:
Nanotechnology based implantable and interfaceable devices - SMALL

NMP.2011.1.4-5:
Multiscale Modelling as a Tool for Virtual Nanotechnology Experimentation - Coordinated call with Russia - SMALL
Institution: University of Limerick
Profile/Expertise: see attachment


ID: PO-10-RU-195
Date: 01.06.2010
Topic:
NMP.2011.1.4-5:
Multiscale Modelling as a Tool for Virtual Nanotechnology Experimentation - Coordinated call with Russia - SMALL

NMP-2011-4.0-1:
New technologies based on physical processing of materials for mechanical or electro-technical applications - LARGE
Institution: Center of Nanostructured Materials and Nanotechnology of Belgorod State University
Profile/Expertise: see attachment


ID: PO-10-IT-193
Date: 31.05.2010
Topic:
NMP.2011.1.2-1:
Development and up-scaling of innovative photovoltaic cell processes and architectures to pilot-line scale for industrial application, Joint call with ENERGY - LARGE

NMP-2011-2.2-3:
Materials for solid state lighting - SMALL

NMP-2011-2.3-2:
ERA-NET on research on materials science and engineering, including international cooperation - CSA-CA
Institution: Physics Department University of Bologna
Profile/Expertise: see attachment


ID: PO-10-IE-192
Date: 25.05.2010
Topic:
NMP.2011.1.4-3:
Tools and methodologies for imaging structures and composition at the nanometre scale - SME

NMP-2011-2.3-3:
Networking of materials laboratories and innovation actors in various industrial sectors for product or process innovation - CSA-CA

NMP-2011-4.0-1:
New technologies based on physical processing of materials for mechanical or electro-technical applications - LARGE
Institution: SEAM South Eastern Applied Materials Research Group
Profile/Expertise: see attachment


ID: PO-10-UA-191
Date: 23.05.2010
Topic:
NMP.2011.1.2-3:
Active nanomembranes/-filters/-adsorbents for efficient water treatment with stable or regenerable low-fouling surfaces - SMALL

NMP.2011.1.3-3:
Intelligent testing strategies for nanomaterials impact and exposure - towards regulation and clustering of materials - CSA-SA

NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE
Institution: Odessa National I.I.Mechnikov University
Profile/Expertise: see attachment


ID: PO-10-ES-190
Date: 17.05.2010
Topic:
NMP-2011-2.1-2:
Modelling of ultrafast dynamics in materials - SMALL
Institution: Instituto de Optica, CSIC
Profile/Expertise: see attachment


ID: PO-10-DE-189
Date: 17.05.2010
Topic:
NMP.2011.1.4-4:
Nanotechnology based implantable and interfaceable devices - SMALL
Institution: Fraunhofer IWS
Profile/Expertise: see attachment


ID: PO-10-IT-186
Date: 12.05.2010
Topic:
FoF.NMP.2011-5:
Towards zero-defect manufacturing - LARGE
Institution: ALESAMONTI s.r.l.
Profile/Expertise: see attachment


ID: PO-10-TR-184
Date: 07.05.2010
Topic:
EeB-NMP.2011-1:
Materials for new energy efficient building components with reduced embodied energy - LARGE

EeB.NMP.2011-2:
New efficient solutions for energy generation, storage and use related to space heating and domestic water in existing buildings - LARGE

EeB.NMP.2011-3:
Energy saving technologies for buildings envelope retrofitting - LARGE
Institution: GOKSER MAKINA LTD STI
Profile/Expertise: see attachment


ID: PO-10-IE-183
Date: 22.04.2010
Topic:
NMP.2011.1.2-1:
Development and up-scaling of innovative photovoltaic cell processes and architectures to pilot-line scale for industrial application, Joint call with ENERGY - LARGE

NMP-2011-2.1-1:
Research and innovation for advanced ceramic materials - SME

EeB-NMP.2011-1:
Materials for new energy efficient building components with reduced embodied energy - LARGE
Institution: SEAM South Eastern Applied Materials Research Group
Profile/Expertise: see attachment


ID: PO-10-DE-178
Date: 02.03.2010
Topic:
NMP.2010.3.1-1:
New industrial models for a sustainable and efficient production - SMALL

FoF.NMP.2010-1:
Plug- and Produce components for adaptive control - CP

FoF.NMP.2010-2:
Supply chain approaches for small series industrial production - CP
Institution: Hamburg University of Applied Science
Profile/Expertise: see attachment


ID: PO-10-DE-177
Date: 01.03.2010
Topic:
NMP.2010.2.3-1:
Development of standard scaffolds for the rational design of bioactive materials for tissue regeneration - LARGE

NMP.2010.4.0-4:
A new generation of multi-functional fibre-based products produced by new and flexible manufacturing cocepts - SME

NMP.2010.4.0-8:
ERANET on Manufacturing - ERANET
Institution: Fraunhofer Institute for Production Technology
Profile/Expertise: see attachment


ID: PO-10-AT-173
Date: 15.01.2010
Topic:
NMP.2011.1.2-2:
New targeted therapy using nanotechnology for transport of macro-molecules across biological barriers - LARGE

NMP.2011.1.4-1:
Large-scale green and economical synthesis of nanoparticles and nanostructures - LARGE

NMP.2011.1.4-5:
Multiscale Modelling as a Tool for Virtual Nanotechnology Experimentation - Coordinated call with Russia - SMALL
Institution: Research Center Pharmaceutical Engineering GmbH
Profile/Expertise: see attachment


ID: PO-09-ES-172
Date: 17.12.2009
Topic:
NMP.2010.1.3-1:
Reference methods for managing the risk of engineered nanoparticles - LARGE

NMP.2010.2.4-1:
New materials and / or membranes for catalytic reactors - LARGE

NMP.2010.4.0-4:
A new generation of multi-functional fibre-based products produced by new and flexible manufacturing cocepts - SME
Institution: Universitat Rovira i Virgili
Profile/Expertise: see attachment


ID: PO-09-GB-171
Date: 06.12.2009
Topic:
NMP.2010.1.3-2:
Modelling toxicity behaviour of engineered nanoparticles - SMALL (Coordinated call with the USA)

NMP.2010.4.0-1:
Development of nanotechnology - based systems for detection, diagnosis and therapy for cancer - LARGE

NMP.2010.4.0-5:
Support to coordination activities of NMP related to European Technology Platforms - CSA (coordinating action)
Institution: University of Oxford
Profile/Expertise: see attachment


ID: PS-09-GR-170
Date: 02.12.2009
Topic:
NMP.2010.4.0-2:
Capacity building for the development of nanotech-based multiparameter sensors - LARGE
Institution: HELP-FORWARD Network
Profile/Expertise: see attachment


ID: PO-09-RU-169
Date: 30.11.2009
Topic:
NMP.2010.2.3-1:
Development of standard scaffolds for the rational design of bioactive materials for tissue regeneration - LARGE

NMP.2010.2.4-1:
New materials and / or membranes for catalytic reactors - LARGE

NMP.2010.3.4-1:
Manufacturing systems for 3D-shaped, multilayered products based on flexible materials - LARGE
Institution: Lebedev Physics Institute of RAS, Samara branch
Profile/Expertise: see attachment


ID: PO-09-DE-167
Date: 25.11.2009
Topic:
NMP.2010.4.0-1:
Development of nanotechnology - based systems for detection, diagnosis and therapy for cancer - LARGE

NMP.2010.4.0-2:
Capacity building for the development of nanotech-based multiparameter sensors - LARGE
Institution: Hochschule Furtwangen
Profile/Expertise: see attachment


ID: PO-09-IE-166
Date: 25.11.2009
Topic:
NMP.2010.4.0-1:
Development of nanotechnology - based systems for detection, diagnosis and therapy for cancer - LARGE

NMP.2010.4.0-2:
Capacity building for the development of nanotech-based multiparameter sensors - LARGE
Institution: Trinity College Dublin - CRANN - Centre for Research on Adaptive Nanostructures and Nanodevices
Profile/Expertise: see attachment


ID: PO-09-AT-162
Date: 19.11.2009
Topic:
NMP.2010.3.1-1:
New industrial models for a sustainable and efficient production - SMALL

FoF.NMP.2010-1:
Plug- and Produce components for adaptive control - CP
Institution: concircle manufacturing consultants
Profile/Expertise: see attachment


ID: PO-09-IL-161
Date: 17.11.2009
Topic:
NMP.2010.1.3-1:
Reference methods for managing the risk of engineered nanoparticles - LARGE

NMP.2010.2.3-1:
Development of standard scaffolds for the rational design of bioactive materials for tissue regeneration - LARGE

NMP.2010.4.0-1:
Development of nanotechnology - based systems for detection, diagnosis and therapy for cancer - LARGE
Institution: The Hebrew University of Jerusalem
Profile/Expertise: see attachment


ID: PO-09-IE-159
Date: 12.11.2009
Topic:
NMP.2010.2.4-1:
New materials and / or membranes for catalytic reactors - LARGE

NMP.2010.3.4-1:
Manufacturing systems for 3D-shaped, multilayered products based on flexible materials - LARGE
Institution: Trinity College Dublin
Profile/Expertise: see attachment


ID: PO-09-BE-158
Date: 12.11.2009
Topic:
NMP.2010.1.2-1:
Novel tools integrating individual techniques for real time nanomaterials characterisation - SME

NMP.2010.1.2-2:
Substitutiion of materials or components utilising "green nanotechnology" - SMALL

NMP.2010.2.5-1:
Modelling of degradation and reliability of crystalline materials - SMALL
Institution: Virtual Institute of NanoFilms (VINF)
Profile/Expertise: see attachment


ID: PO-09-GB-157
Date: 12.11.2009
Topic:
NMP.2010.1.2-2:
Substitutiion of materials or components utilising "green nanotechnology" - SMALL

NMP.2010.2.3-1:
Development of standard scaffolds for the rational design of bioactive materials for tissue regeneration - LARGE

NMP.2010.3.4-1:
Manufacturing systems for 3D-shaped, multilayered products based on flexible materials - LARGE
Institution: NetComposites
Profile/Expertise: see attachment


ID: PS-09-GR-153
Date: 06.11.2009
Topic:
NMP.2010.3.4-1:
Manufacturing systems for 3D-shaped, multilayered products based on flexible materials - LARGE
Institution: HELP-FORWARD Network
Profile/Expertise: see attachment


ID: PO-09-RU-152
Date: 05.11.2009
Topic:
NMP.2010.2.4-1:
New materials and / or membranes for catalytic reactors - LARGE
Institution: University of North Ossetia
Profile/Expertise: see attachment


ID: PO-09-BE-151
Date: 05.11.2009
Topic:
NMP.2010.2.5-1:
Modelling of degradation and reliability of crystalline materials - SMALL

NMP.2010.4.0-2:
Capacity building for the development of nanotech-based multiparameter sensors - LARGE

EeB.NMP.2010-1:
New nanotechnology-based high performance insulation systems for energy efficiency - CP
Institution: Université catholique de Louvain; Dept EMIC
Profile/Expertise: see attachment


ID: PO-09-CH-150
Date: 05.11.2009
Topic:
FoF.NMP.2010-2:
Supply chain approaches for small series industrial production - CP

FoF.NMP.2010-3:
Intelligent, scalable manufacturing platforms and equipment for components with micro- and nano-scale functional features - CP
Institution: Laboratory for Production Management and Processes, EPF Lausanne
Profile/Expertise: see attachment


ID: PO-09-DK-149
Date: 05.11.2009
Topic:
NMP.2010.4.0-2:
Capacity building for the development of nanotech-based multiparameter sensors - LARGE
Institution: Danish Technological Institute
Profile/Expertise: see attachment


ID: PO-09-CH-148
Date: 05.11.2009
Topic:
FoF.NMP.2010-1:
Plug- and Produce components for adaptive control - CP

FoF.NMP.2010-3:
Intelligent, scalable manufacturing platforms and equipment for components with micro- and nano-scale functional features - CP
Institution: Asyril SA
Profile/Expertise: see attachment


ID: PO-09-DK-147
Date: 05.11.2009
Topic:
NMP.2010.2.3-1:
Development of standard scaffolds for the rational design of bioactive materials for tissue regeneration - LARGE
Institution: Chempilots a/s
Profile/Expertise: see attachment


ID: PO-09-FR-146
Date: 04.11.2009
Topic:
NMP.2010.1.2-1:
Novel tools integrating individual techniques for real time nanomaterials characterisation - SME
Institution: oseo
Profile/Expertise: see attachment


ID: PO-09-CH-145
Date: 04.11.2009
Topic:
NMP.2010.2.5-1:
Modelling of degradation and reliability of crystalline materials - SMALL
Institution: BeamExpress
Profile/Expertise: see attachment


ID: PO-09-DE-144
Date: 04.11.2009
Topic:
NMP.2010.4.0-1:
Development of nanotechnology - based systems for detection, diagnosis and therapy for cancer - LARGE
Institution: Institute for Medical Psychology - Otto-von-Guericke University
Profile/Expertise: see attachment


ID: PO-09-RU-143
Date: 04.11.2009
Topic:
NMP.2010.1.2-1:
Novel tools integrating individual techniques for real time nanomaterials characterisation - SME

NMP.2010.3.4-1:
Manufacturing systems for 3D-shaped, multilayered products based on flexible materials - LARGE

EeB.NMP.2010-1:
New nanotechnology-based high performance insulation systems for energy efficiency - CP
Institution: FOTRON-AUTO
Profile/Expertise: see attachment


ID: PO-09-CH-136
Date: 04.11.2009
Topic:
NMP.2010.3.1-1:
New industrial models for a sustainable and efficient production - SMALL
Institution: Infotech AG
Profile/Expertise: see attachment


ID: PO-09-AT-133
Date: 04.11.2009
Topic:
NMP.2010.4.0-1:
Development of nanotechnology - based systems for detection, diagnosis and therapy for cancer - LARGE
Institution: LabDia Labordiagnostik GmbH
Profile/Expertise: see attachment


ID: PO-09-CH-131
Date: 04.11.2009
Topic:
NMP.2010.2.3-1:
Development of standard scaffolds for the rational design of bioactive materials for tissue regeneration - LARGE

NMP.2010.4.0-1:
Development of nanotechnology - based systems for detection, diagnosis and therapy for cancer - LARGE
Institution: Hamilton Bonaduz AG
Profile/Expertise: see attachment


ID: PO-09-CH-130
Date: 04.11.2009
Topic:
NMP.2010.3.1-1:
New industrial models for a sustainable and efficient production - SMALL

FoF.NMP.2010-1:
Plug- and Produce components for adaptive control - CP
Institution: MAG Switzerland AG
Profile/Expertise: see attachment


ID: PO-09-RU-80
Date: 28.09.2009
Topic:
NMP.2010.1.2-1:
Novel tools integrating individual techniques for real time nanomaterials characterisation - SME

NMP.2010.3.4-1:
Manufacturing systems for 3D-shaped, multilayered products based on flexible materials - LARGE

EeB.NMP.2010-1:
New nanotechnology-based high performance insulation systems for energy efficiency - CP
Institution: FOTRON-AUTO
Profile/Expertise: see attachment


ID: PO-09-IE-72
Date: 18.09.2009
Topic:
NMP.2010.4.0-2:
Capacity building for the development of nanotech-based multiparameter sensors - LARGE
Institution: Optical Sensors Laboratory, National Center for Sensor Research, Dublin City University,
Profile/Expertise: see attachment


ID: PO-09-BE-74
Date: 17.09.2009
Topic:
NMP.2010.4.0-1:
Development of nanotechnology - based systems for detection, diagnosis and therapy for cancer - LARGE
Institution: Ghent University
Profile/Expertise: see attachment


ID: PO-09-GB-73
Date: 16.09.2009
Topic:
NMP.2010.2.2-1:
Organic-inorganic hybrids for eletronics and photonics - SMALL

NMP.2010.4.0-2:
Capacity building for the development of nanotech-based multiparameter sensors - LARGE

FoF.NMP.2010-3:
Intelligent, scalable manufacturing platforms and equipment for components with micro- and nano-scale functional features - CP
Institution: Optocap Ltd
Profile/Expertise: see attachment


ID: PS-09-GB-76
Date: 11.09.2009
Topic:
NMP.2010.2.3-1:
Development of standard scaffolds for the rational design of bioactive materials for tissue regeneration - LARGE
Institution: University of Bristol
Profile/Expertise: see attachment


ID: PO-09-RU-66
Date: 03.09.2009
Topic:
NMP.2010.1.1-1:
Support to dialogue and engagement for responsible social acceptance to nanotechnology - CSA - coordination
Institution: A.V. Shubnikov Institute of Crystallography of RAS
Profile/Expertise: see attachment


ID: PS-09-FR-75
Date: 31.08.2009
Topic:
EeB.NMP.2010-2:
New technologies for energy-efficiency at district level - CP
Institution: FCBA, institut Technologique
Profile/Expertise: see attachment


ID: PO-09-GB-70
Date: 31.08.2009
Topic:
EeB.NMP.2010-2:
New technologies for energy-efficiency at district level - CP
Institution: IES (Integrated Environmental Solutions), Helix Building,
Profile/Expertise: see attachment


ID: PO-09-DE-69
Date: 27.08.2009
Topic:
NMP.2010.2.5-1:
Modelling of degradation and reliability of crystalline materials - SMALL
Institution: Weierstrass Institute for Applied Analysis and Stochastics (WIAS)
Profile/Expertise: see attachment


ID: PO-09-GB-68
Date: 25.08.2009
Topic:
NMP.2010.1.2-1:
Novel tools integrating individual techniques for real time nanomaterials characterisation - SME

NMP.2010.4.0-2:
Capacity building for the development of nanotech-based multiparameter sensors - LARGE

NMP.2010.4.0-7:
ERANET on nanotechnologies, including nanotoxicology - ERANET
Institution: IQE (Europe) Ltd - Compound semiconductor Lasers and detectors, CVP Solar Cells
Profile/Expertise: see attachment


ID: PO-09-DE-60
Date: 13.08.2009
Topic:
NMP.2010.2.3-1:
Development of standard scaffolds for the rational design of bioactive materials for tissue regeneration - LARGE
Institution: Fraunhofer Institute for Interfacial Engineering and Biotechnology
Profile/Expertise: see attachment


ID: PO-09-GB-58
Date: 12.08.2009
Topic:
NMP 1 - 2014:
Open access pilot lines for cost effective nanocomposites

NMP 5 - 2014:
Industral-scale production of nanomaterials for printing applications

NMP 30 - 2015:
Next generation tools for risk governance of nanomaterials
Institution: Institute of Occupational Medicine (IOM)
Profile/Expertise: see attachment


ID: PO-09-GB-57
Date: 09.08.2009
Topic:
NMP.2010.4.0-1:
Development of nanotechnology - based systems for detection, diagnosis and therapy for cancer - LARGE
Institution: Barts and the London School of Medicine, Queen Mary University of London
Profile/Expertise: see attachment


ID: PO-09-TR-47
Date: 06.08.2009
Topic:
NMP.2010.1.1-1:
Support to dialogue and engagement for responsible social acceptance to nanotechnology - CSA - coordination

NMP.2010.4.0-5:
Support to coordination activities of NMP related to European Technology Platforms - CSA (coordinating action)

NMP.2010.4.0-6:
Organisation of events related to the Presidencies of the European Union Supporting actions - CSA (supporting action)
Institution: Novicor Technology Partners
Profile/Expertise: see attachment